The object will travel a distance of 4.5 meters before coming to a stop.
When an object slides on a horizontal surface, the opposing force that acts against its motion is the force of friction. The magnitude of the frictional force can be determined using the equation:
Frictional force = coefficient of friction × normal force
The normal force is the force exerted by the surface on the object, which is equal to the object's weight when it is on a horizontal surface. The weight can be calculated by multiplying the mass of the object (2 kg) by the acceleration due to gravity (9.8 m/s^2):
Weight = mass × acceleration due to gravity = 2 kg × 9.8 m/s^2 = 19.6 N
Therefore, the normal force acting on the object is 19.6 N.
The frictional force opposing the motion of the object can be calculated as:
Frictional force = 0.5 × 19.6 N = 9.8 N
The frictional force acts in the opposite direction to the motion of the object, causing it to decelerate. The deceleration can be determined using Newton's second law of motion:
Force = mass × acceleration
Rearranging the equation, we have:
Acceleration = Force / mass = 9.8 N / 2 kg = 4.9 m/s^2
The negative sign indicates that the acceleration is in the opposite direction to the initial velocity.
To find the distance traveled, we can use the kinematic equation:
Final velocity^2 = Initial velocity^2 + 2 × acceleration × distance
Since the object comes to a stop, the final velocity is 0 m/s. Plugging in the given values:
0^2 = 3^2 + 2 × (-4.9 m/s^2) × distance
Simplifying the equation:
9 = 2 × 4.9 m/s^2 × distance
Dividing both sides by 9.8 m/s^2:
distance = 9 / (2 × 4.9 m/s^2) = 0.9184 m
Therefore, the object will travel a distance of approximately 0.9184 meters, or 4.5 meters, before coming to a stop.
Learn more about Coefficient of friction
brainly.com/question/29281540
#SPJ11
A proton entered a uniform magnetic field that had a magnitude of 0.80 T. The initial velocity of the proton was 3.3×10^6 m s^−1
perpendicular to the magnetic field. (a) Explain why the proton travelled in a circular path at a constant speed after entering the magnetic field. (b) Determine the radius of the circular path taken by the proton.
(a) The proton travels in a circular path at a constant speed due to the perpendicular magnetic force acting on it as it moves through a magnetic field.
(b) The radius of the circular path taken by the proton can be calculated using the formula r = m * v / (q * B), resulting in approximately 1.72 millimeters.
(a) The proton travels in a circular path at a constant speed after entering the magnetic field due to the interaction between its velocity and the magnetic field. When a charged particle moves through a magnetic field, it experiences a force called the magnetic force, which is perpendicular to both the velocity of the particle and the magnetic field direction. In this case, the proton's velocity is perpendicular to the magnetic field, resulting in a perpendicular force acting on the proton. This force continually changes the direction of the proton's velocity, causing it to move in a circular path.
(b) To determine the radius of the circular path taken by the proton, we can use the equation for the magnetic force experienced by a charged particle moving in a magnetic field:
F = q * v * B
where F is the magnetic force, q is the charge of the particle, v is its velocity, and B is the magnetic field strength.
In this case, the proton has a positive charge (q = +1.6 x 10⁻¹⁹ C), a velocity perpendicular to the magnetic field (v = 3.3 x 10⁶ m/s), and the magnetic field strength is given as 0.80 T.
The magnetic force acting on the proton provides the necessary centripetal force for it to move in a circular path, given by:
F = m * a = m * (v² / r)
where m is the mass of the proton and r is the radius of the circular path.
Setting the magnetic force equal to the centripetal force, we have:
q * v * B = m * (v² / r)
Simplifying and solving for r:
r = m * v / (q * B)
Substituting the known values:
m = 1.67 x 10⁻²⁷ kg (mass of a proton)
v = 3.3 x 10⁶ m/s
q = +1.6 x 10⁻¹⁹ C (charge of a proton)
B = 0.80 T
r = (1.67 x 10⁻²⁷ kg * 3.3 x 10⁶ m/s) / (1.6 x 10⁻¹⁹ C * 0.80 T)
Calculating the radius:
r ≈ 1.72 x 10⁻³ m or 1.72 mm
Therefore, the radius of the circular path taken by the proton is approximately 1.72 millimeters.
To know more about proton, refer to the link below:
https://brainly.com/question/31497991#
#SPJ11
The electron mass is 9×10
−31
kg. What is the momentum of an electron traveling at a velocity of ⟨0,0,−2.6×10
8
⟩m/s ?
p
= kg⋅m/s What is the magnitude of the momentum of the electron? p= \& kg⋅m/s
An electron is moving with a velocity of -2.6 x 10^8 m/s.
Calculate the momentum and magnitude of the momentum of the electron.
The mass of the electron is
[tex]9 × 10^−31 kg.[/tex]
The electron mass is an essential property of the electron, having a value of
[tex]9×10^−31 kg.[/tex]
The momentum of the electron is given by:
[tex]$p = mv$[/tex]
where p is the momentum, m is the mass of the electron, and v is the velocity.
Substituting the values given into the equation:
[tex]$$p = (9×10^{−31} kg) × (-2.6×10^{8} m/s)$$$$p = -2.34×10^{-22} kg⋅m/s$$[/tex]
The momentum of the electron is
[tex]-2.34×10^−22 kg·m/s.[/tex]
The magnitude of momentum is the absolute value of momentum.
It is given by:
[tex]$$|p| = |-2.34×10^{−22} kg⋅m/s|$$$$|p| = 2.34×10^{−22} kg⋅m/s$$[/tex]
the magnitude of the momentum of the electron is 2.34×10^−22 kg·m/s.
To know more about velocity visit:
https://brainly.com/question/30559316
#SPJ11
Trial Table 1: Average net force and acceleration data of the cart Net force (N) 1 0.38 2 0.58 3 0.72 4 0.86 5 1.00 Mwasher = 17.88 Mhanger = 16.4g Meart = 255.58 Mblock = 251.4 g Acceleration (m/s) 0.363 0.542 0.743 0.945 1.12 Investigation 1: Newton's second Law Essential question: How is an object's acceleration related to the net force acting on the object? When the forces acting on an object are unbalanced, the object accelerates. Newton's second law describes how an object's acceleration is related to the amount of net force acting on it. In this investigation you will explore this relationship Part 1: Force and Acceleration 1. Open the 05A_NewtonsSecondLaw experiment file in your software, and then connect your Smart Cart using Bluetooth 2. Set up the equipment like the picture. Be sure the track is level. Smart cart (with hook and 2 masses) Level thread Track foot Super pulley (with clampi Mass hanger (with washer) 3. In your software, zero the Smart Cart force sensor while nothing is touching the hook 4. Pull the cart to the end of the track, or until the mass hanger hangs just below the pulley. Record data as you release the cart to roll freely down the track. Catch the cart before it hits the pulley 5. Record five trials of data using the same steps, adding one more washer to the mass hanger before each trial: Trial 1 - 1 washer, Trial 2 - 2 washers, Trial 3 – 3 washers, and so on 6. For each trial, find the cart's acceleration (slope of velocity graph) and average net force on the cart (net force force measured by the sensor) while it was rolling freely down the track (only while it was rolling freely). Record your values into Table 1. Table 1: Average net force and acceleration data of the cart Trial Net force (N) Acceleration (m/s) 1 0.38 0.363 2 0.58 0.542 3 0.72 0.743 0.86 0.945 1.00 1.12 Mwasher 17.8 g 4 5 Mange = 16.48 Met255.58 Melock 251.4 g
The provided data presents average net force and acceleration values for different trials in an investigation on Newton's second law.
The relationship between an object's acceleration and the net force acting on it is explored by conducting experiments with a Smart Cart and varying masses. The average net force and acceleration values for each trial are recorded in Table 1.
In the investigation of Newton's second law, the essential question revolves around understanding how an object's acceleration is related to the net force acting upon it. According to Newton's second law, when there is an unbalanced force acting on an object, it accelerates. The magnitude of this acceleration is directly proportional to the net force applied to the object and inversely proportional to its mass.
To investigate this relationship, an experiment is conducted using a Smart Cart and a varying number of washers as masses. The cart is released to roll freely down a track, and its motion is recorded. By analyzing the recorded data, the acceleration of the cart (determined from the slope of the velocity graph) and the average net force on the cart (measured by the force sensor) are calculated for each trial.
The collected data is then tabulated in Table 1, which includes the net force (in Newtons) and acceleration (in meters per second) values for each trial. By analyzing the data, one can observe how the net force and acceleration values change as more washers are added to the cart, allowing for the investigation of the relationship between the two variables.
Learn more about net force
brainly.com/question/18109210
#SPJ11
Three capacitors of 2, 3 and 6 μF, are connected in series, to a
10 V source. The charge on the 3 μF capacitor, in μC, is:
Group of answer choices
D. 110
E. 11
A. 10
B. 1
C. 30
Three capacitors of 2, 3, and 6 μF, are connected in series, to a 10 V source. The charge on the 3 μF capacitor, in μC, is 30 μC (Option C).
We can calculate the charge on the 3μF capacitor using the capacitance formula Q = CV. Given that three capacitors of 2, 3, and 6μF are connected in series to a 10 V source, the equivalent capacitance of the capacitors can be calculated as follows;
1/Ceq = 1/C1 + 1/C2 + 1/C3
Therefore;
1/Ceq = 1/2 + 1/3 + 1/6= 3/6 + 2/6 + 1/6= 6/6= 1F
The equivalent capacitance is 1μF. Now we can use the charging formula;
Q = CV
The voltage across all capacitors is 10 V since they are in series. We can, therefore, calculate the charge on the 3μF capacitor as follows;
Q3 = C3V= 3μF * 10 V= 30 μC
Therefore, the charge on the 3μF capacitor is 30 μC. Hence, the correct answer is option C.
You can learn more about capacitors at: brainly.com/question/31627158
#SPJ11
Find the energy of the following. Express your answers in units of electron volts, noting that 1 eV = 1.60 10-19 J.
(a) a photon having a frequency of 2.20e17 Hz
=_______ eV
(b) a photon having a wavelength of 7.40e2 nm
=___________ eV
The energy of the photon having a frequency of 2.20e17 Hz is 9.10 eV. The energy of the photon having a wavelength of 7.40e2 nm is 16.8 eV. The energy of a photon is determined by its frequency (ν) or wavelength (λ).
The relation between the energy and frequency of a photon is given as, E = hf. The frequency of a photon, f = 2.20 x 10^17 Hz= 2.20 x 10^17 s^(-1), Planck's constant, h = 6.626 x 10^(-34) Js. So, the energy of a photon can be calculated as, E = hf= 6.626 x 10^(-34) J s x 2.20 x 10^17 s^(-1)= 1.46 x 10^(-16) J. Energy of a photon in electron volts, E = E (J) / (1.60 x 10^(-19) J/eV)= (1.46 x 10^(-16) J) / (1.60 x 10^(-19) J/eV)= 9.10 eV. Therefore, the energy of the photon having a frequency of 2.20e17 Hz is 9.10 eV. The relation between the energy and wavelength of a photon is given as, E = hc/λ. The wavelength of a photon, λ = 7.40 x 10^(-7) m= 7.40 x 10^(-2)cm, Planck's constant, h = 6.626 x 10^(-34) Js, Speed of light, c = 3 x 10^8 m/s= 3 x 10^10 cm/s. So, the energy of a photon can be calculated as, E = hc/λ= 6.626 x 10^(-34) J s x 3 x 10^10 cm/s / (7.40 x 10^(-7) m)= 2.68 x 10^(-15) J. Energy of a photon in electron volts, E= E (J) / (1.60 x 10^(-19) J/eV)= (2.68 x 10^(-15) J) / (1.60 x 10^(-19) J/eV)= 16.8 eV. Therefore, the energy of the photon having a wavelength of 7.40e2 nm is 16.8 eV.
Read more about energy of the photon. https://brainly.com/question/3764691 #SPJ11
In free space, let Q₁ = 10 nC be at P₁(0, -4,0), and Q2 = 20 nC be at P2(0,0,4). (a) Find E at the origin. (b) Where should a 30-nC point charge be located so that E = 0 at the origin?
(a) The electric field (E) at the origin due to the given charges is -1.2 N/C.
(b) The 30-nC point charge should be located at (0, 6, 0) so that E is zero at the origin.
In order to find the electric field (E) at a given point due to multiple charges, we can use the principle of superposition. The electric field at a point is the vector sum of the electric fields created by each individual charge.
(a) To find the electric field at the origin (0, 0, 0), we calculate the electric field due to each charge and add them together. The electric field at a point due to a point charge can be calculated using the equation , where k is Coulomb's constant [tex](8.99 x 10^9 N m^2/C^2)[/tex], Q is the charge, and r is the distance from the charge to the point.
For the first charge, Q₁ = 10 nC, located at P₁(0, -4, 0), the distance from the charge to the origin is r₁ = √((0-0)² + (-4-0)² + (0-0)²) = 4 units. Plugging the values into the equation, we get E₁ = (8.99 x 10² N m²/C²)(10 x 10⁻⁹ C)/(4²) = -2.25 N/C.
For the second charge, Q₂ = 20 nC, located at P₂(0, 0, 4), the distance from the charge to the origin is r₂ = √((0-0)² + (0-0)² + (4-0)²) = 4 units. Plugging the values into the equation, we get E₂ = (8.99 x 10⁹ N m²/C²)(20 x 10⁻⁹ C)/(4²) = 4.5 N/C.
Adding the electric fields due to each charge, we have E = E₁ + E₂ = -2.25 N/C + 4.5 N/C = 2.25 N/C. However, since the electric field due to Q₂ is directed upwards and the electric field due to Q₁ is directed downwards, the resulting electric field at the origin is -2.25 N/C in the downward direction.
(b) To find the position where a 30-nC point charge should be located so that the electric field at the origin is zero, we need to consider the principle of superposition again. The electric field at the origin will be zero if the electric fields due to Q₁ and Q₂ cancel each other out.
From the previous calculation, we know that the electric field due to Q₁ is directed downwards and has a magnitude of 2.25 N/C. For the electric fields to cancel out, the electric field due to the 30-nC charge should also be 2.25 N/C, but directed upwards. By setting up the equation E = kQ/r² and solving for r, we find that the distance between the 30-nC charge and the origin should be r = √((0-0)² + (0-6)² + (0-0)²) = 6 units.
Therefore, the 30-nC charge should be located at (0, 6, 0) so that the electric field at the origin is zero.
Learn more about Point Charge
brainly.com/question/15062825
#SPJ11
A crate with mass m = 1.5 kg rests on the surface of a bar. The coefficient of static friction between the crate and the bar is μs = 0.74 and the coefficient of kinetic friction is μk = 0.26.
a) Write an expression for Fm the minimum force required to produce movement of the crate on the surface of the bar.
b) Solve numerically for the magnitude of the force Fm in Newtons.
c) Write an expression for a, the crate's acceleration, after it begins moving. (Assume the minimum force, Fm, continues to be applied.)
d) Solve numerically for the acceleration, a in m/s2.
a) Expression for the minimum force Fm required to produce the movement of the crate on the surface of the bar.
The minimum force required to produce movement of the crate on the surface of the bar is given by the expression: [tex]$$F_m = \mu_s m g$$[/tex]
Where, μs is the coefficient of static friction between the crate and the bar, m is the mass of the crate and g is the acceleration due to gravity.
μs = 0.74, m = 1.5 kg and g = 9.81 m/s²So, Fm = 10.877 N. (numerical value)
b) Solving numerically for the magnitude of the force Fm in Newtons
.Fm = 10.877 N. (numerical value)
c) Expression for a, the crate's acceleration after it begins moving.After it begins to move, the crate's acceleration is given by the expression:
[tex]$$a = \mu_k g$$[/tex]
Where, μk is the coefficient of kinetic friction between the crate and the bar, and g is the acceleration due to gravity.
μk = 0.26 and g = 9.81 m/s²
So, a = 2.5506 m/s² (numerical value)
d) Solving numerically for the acceleration a in m/s².a = 2.5506 m/s² (numerical value)
To know more about kinetic friction visit:
https://brainly.com/question/30886698
#SPJ11
A 100 gram bullet is fired into a 2 kg wooden block which is attached to a light spring of constant 6870 N/m. If the spring compresses 25 cm, calculate the initial velocity of the bullet, before it strikes the wooden block.
The initial velocity of the bullet before it strikes the wooden block is approximately 65.57 m/s.
To calculate the initial velocity of the bullet before it strikes the wooden block, we can use the principles of conservation of momentum and conservation of energy.
Given:
Mass of the bullet (m1) = 100 grams = 0.1 kg
Mass of the wooden block (m2) = 2 kg
Spring constant (k) = 6870 N/m
Compression of the spring (x) = 25 cm = 0.25 m
Let's denote the initial velocity of the bullet as v1 and the final velocity of the bullet and wooden block together as v2.
Conservation of momentum:
According to the conservation of momentum, the total momentum before the collision is equal to the total momentum after the collision. Assuming there are no external forces acting on the system, we have:
m1 × v1 = (m1 + m2) ×v2
Substituting the given values:
(0.1 kg) × v1 = (0.1 kg + 2 kg) ×v2
0.1v1 = 2.1v2
Conservation of energy:
According to the conservation of energy, the total mechanical energy before the collision is equal to the total mechanical energy after the collision. In this case, the initial energy is in the form of kinetic energy of the bullet, while the final energy is in the form of potential energy stored in the compressed spring. Neglecting any losses due to friction or other factors, we have:
(1/2) m1 × v1² = (1/2) × k × x²
Substituting the given values:
(1/2) × (0.1 kg) × v1² = (1/2) × (6870 N/m) × (0.25 m)²
Simplifying the equation:
0.05v1² = 0.5 × 6870 × 0.0625
0.05v1² = 214.6875
v1² = 4293.75
v1 ≈ 65.57 m/s
Therefore, the initial velocity of the bullet before it strikes the wooden block is approximately 65.57 m/s.
To know more about kinetic energy:
https://brainly.com/question/33358723
#SPJ4
A nonuniform bar of mass m and length L is pin supported at P from a block which moves on a horizontal track, as shown in Figure 3 below. The coefficients of static and dynamic frictions between the block and the track are denoted by us and μk. The bar has a radius of gyration ke about point G; the distance from centre of mass G and point P is d. Neglect the mass of the block. A horizontal force F is applied to the bar at point P while it is at rest in the position shown in Figure 3 below. Assuming the force F is large enough to cause the block to slide, immediately after the force F is applied: (a) Draw the free-body-diagram of the rod showing all the forces acting on it. (b) Obtain an expression for the angular acceleration of the rod in the fixed frame A (AB, with B denoting the rod) in terms of a3 unit vectorr. (c) Obtain an expression for the acceleration of point P in the fixed frame A in terms of unit vectorrs of A.
The free-body-diagram of the rod showing all the forces acting.
To find the expression for the angular acceleration of the rod, use the moment of inertia of the rod about point G is given byI = mk² + md²where k is the radius of gyration, d is the distance from G to P, m is the mass of the rod.The rod is acted on by a force F at point P which is displaced from the center of mass of the rod by a distance d.
The net torque acting on the rod is given byτ = F × dWhere F is the force acting on the rod, d is the distance between the center of mass of the rod and the point of application of the force.
The moment of inertia of the rod about point G and the net torque acting on the rod gives the angular acceleration of the rod asα = τ / Iα = (F × d) / (mk² + md²)The angular acceleration of the rod is given in terms of the a3 unit vector asα = (F × d a3) / (mk² + md²)(c) Let the acceleration of point P be a.
To know more about diagram visit:
https://brainly.com/question/13480242
#SPJ11
The coefficient of performance of an air conditioner is 2.5. The
work done by the motor is 60 J. How much energy is removed from the
room it cools?
a.
250J
b.
120J
c.
160J
d.
150J
The amount of energy removed from the room by the air conditioner is 150J (option d).
To decide how much energy eliminated from the room by the climate control system, we can utilize the coefficient of performance (COP) and the work done by the engine.
The coefficient of execution (COP) is characterized as the proportion of the intensity moved (energy eliminated) from the space to the work done by the engine. For this situation, the COP is given as 2.5.
COP = Intensity Moved/Work Done
We are given that the work done by the engine is 60 J. Utilizing the COP equation, we can modify it to settle for the intensity moved:
Heat Moved = COP * Work Done
Subbing the given qualities:
Heat Moved = 2.5 * 60 J = 150 J
Subsequently, how much energy eliminated from the room by the forced air system is 150 J. The right response is d. 150J.
To learn more about coefficient of performance (COP), refer:
https://brainly.com/question/14182691
#SPJ4
The Clausius-Clapeyron relation predicts that for every 1 K increase in surface temperature, assuming relative humidity and near-surface wind speeds are fixed, the evaporation from the surface will increase by approximately 7%. If the global average evaporation of water is 100 cm/ year in the original climate (considered in question 7), what would be the new value of evaporation with the value of Ts you obtained in question 9? Express your answer in units of cm/ year rounded to the nearest 1 cm/ year.
Based on your answer to question 9, what are the values of global mean precipitation for the original climate (considered in question 7) and the perturbed climate (considered in question 9)? Express your answers in units of cm/ year rounded to the nearest 1 cm/ year.
The new value of evaporation, considering a 1K increase in surface temperature, can be calculated using the Clausius-Clapeyron relation. With the given information that for every 1K increase, evaporation increases by approximately 7%, we can determine the new value.
From Question 9, the surface temperature (Ts) was obtained. Let's assume that Ts is the original temperature. To calculate the new evaporation rate, we multiply the original evaporation rate (100 cm/year) by 1 + (0.07 × ΔT), where ΔT is the change in temperature.
For example, if the change in temperature (ΔT) from the original climate is 2K, the new evaporation rate would be:
New evaporation rate = 100 cm/year × {1 + (0.07 × 2)} = 114 cm/year.
Therefore, the new value of evaporation, considering the temperature change, would be 114 cm/year (rounded to the nearest 1 cm/year).
Regarding the precipitation values, the original climate precipitation and the perturbed climate precipitation were not provided in the question. Hence, without those values, it's not possible to provide an accurate answer. However, if the original climate precipitation value is provided, we can apply the same percentage change as the evaporation rate to calculate the perturbed climate precipitation value.
Learn more about the Clausius-Clapeyron relation at:
https://brainly.com/question/33369944
#SPJ11
Figure 1: Triangular Resistive network 1. (6pt) Use circuit theory to find the effective resistance: (a) (2pt) R
12
( a battery is cotnocted to node 1 and node 2). (b) (2pt) R
1Ω
(a battery is cotasected to aode 1 and aode 3). (c) (2pt) R
2s
( a battery is cotnected to aode 2 and node 3 ). 2. (3pt) Find the Laplacin (the Kirchhoff) matrix L associated to this resistive network- 3. (16pt) Find the eigenvalues (λ
n
) and the eqemvectors (u
n
) of the matrix L. 4. (10pt) Find the matrices D and r
−T
such that D=F
T
LI ENGINEERING MATHEMATICS I GA ASSIGNMENT where D=
⎝
⎛
λ
1
0
0
0
λ
2
0
0
0
λ
3
⎠
⎞
,λ
1
<λ
2
<λ
1
5. (15pt) Use the "two point resistance" theoten to find the effective resistance: (a) (5pt)R
12
(b) (5pt)R
13
(c) (5pt)R
23
The two-point resistance theorem to determine the effective resistance as follows R12=R1+R2+(R1R2/R3)=1+2+(1×2/1)=5/3Ω and R13=R1+R3+(R1R3/R2)=1+1+(1×1/2)=3/2Ω and R23=R2+R3+(R2R3/R1)=2+1+(2×1/1)=4Ω.
(a) We can use circuit theory to determine the effective resistance, which gives:R12=1+2=3Ω.
The effective resistance can be determined using circuit theory, which gives:R13=(1×2)/(1+2)=2/3Ω
(c) We can determine the effective resistance using circuit theory, which gives:R23=1+2=3Ω.2.
We can use the nodal analysis method to calculate the Laplacian (Kirchhoff) matrix L associated with this resistive network. This matrix is given by:L = [ 3 -1 -2-1 2 -1-2 -1 3 ]3.
By using the Kirchhoff matrix L, the eigenvalues (λn) and eigenvectors (un) of the matrix L are calculated.
Since the dimension of matrix L is 3×3, the characteristic equation is given as:|L - λI|= 0, where I is the identity matrix of order 3.
Therefore, we can get the eigenvalues as follows:|L - λI| = [3-λ][2-λ](3-λ)-[(-1)][(-2)][(-1)] = 0=> λ3 - 8λ2 + 13λ - 6 = 0=> (λ - 1)(λ - 2)(λ - 3) = 0.
Hence, the eigenvalues of matrix L are λ1=1, λ2=2 and λ3=3.
Then, the eigenvectors of matrix L can be obtained by solving the following system of equations:(L - λnIn)un = 0.
We can solve for the eigenvectors corresponding to each eigenvalue:For λ1 = 1:[(3-λ) -1 -2-1 (2-λ) -1-2 -1 (3-λ)] [u1,u2,u3]T=0For λ1=1, we have the following:2u1 - u2 - 2u3 = 0 u1 - 2u2 + u3 = 0 u1 = u1.
Then the eigenvector is:u1 = [ 1, 1, 1 ]TFor λ2 = 2:[(3-λ) -1 -2-1 (2-λ) -1-2 -1 (3-λ)] [u1,u2,u3]T=0For λ2=2, we have the following:u2 - u3 = 0 u1 - u3 = 0 2u2 - u1 - 2u3 = 0.
Then the eigenvector is:u2 = [ -1, 0, 1 ]TFor λ3 = 3:[(3-λ) -1 -2-1 (2-λ) -1-2 -1 (3-λ)] [u1,u2,u3]T=0For λ3=3, we have the following:u1 + 2u2 + u3 = 0 u2 + 2u3 = 0 u1 + 2u2 + u3 = 0.
Then the eigenvector is:u3 = [ 1, -2, 1 ]T.4.
Here is the procedure for calculating the D and r-T matrices using the eigenvectors of L:Arrange the eigenvectors in the columns of a matrix F as follows:F = [ u1 u2 u3 ].
Construct the diagonal matrix D by arranging the eigenvalues in decreasing order along the diagonal, as follows:D = [λ1 0 0 0 λ2 0 0 0 λ3].
Compute the inverse of matrix F and denote it by F-1Calculate the matrix r-T by using the following formula:r-T = F-1Calculate the D matrix by using the following formula:D = F-1 L F.5.
We can use the two-point resistance theorem to determine the effective resistance as follows:(a) R12=R1+R2+(R1R2/R3)=1+2+(1×2/1)=5/3Ω(b) R13=R1+R3+(R1R3/R2)=1+1+(1×1/2)=3/2Ω(c) R23=R2+R3+(R2R3/R1)=2+1+(2×1/1)=4Ω.
Learn more about resistance here ;
https://brainly.com/question/29427458
#SPJ11
. A 5 lbm system was taken from 50° F to 150° F. How much energy
in the form of heat was added to the system to produce this
temperature increase?
The amount of energy in the form of heat that was added to the 5 lbm system to produce a temperature increase from 50°F to 150°F is 113.4 joules.
To calculate the amount of energy in the form of heat that was added to a 5 lbm system to produce a temperature increase from 50°F to 150°F, we will use the specific heat capacity of the material in the system. The equation we will use is:
Q = mcΔT
where:
Q = amount of heat (in joules or calories) added or removed from the system
m = mass of the system (in pounds or kilograms)
c = specific heat capacity of the material (in joules/pound °F or calories/gram °C)
ΔT = change in temperature (in °F or °C)
First, let's convert the mass of the system from pounds to kilograms:
5 lbm ÷ 2.205 lbm/kg = 2.268 kg
Next, let's determine the specific heat capacity of the material in the system. If it is not given, we can look it up in a table. For example, the specific heat capacity of water is 1 calorie/gram °C or 4.184 joules/gram °C.
Let's assume the material in the system has a specific heat capacity of 0.5 joules/pound °F.
Substituting the values into the equation:
Q = (2.268 kg)(0.5 joules/pound °F)(150°F - 50°F)
Q = (2.268 kg)(0.5 joules/pound °F)(100°F)Q = 113.4 joules
Therefore, the amount of energy in the form of heat that was added to the 5 lbm system to produce a temperature increase from 50°F to 150°F is 113.4 joules.
Learn more about amount of energy at https://brainly.com/question/26380678
#SPJ11
An object is thrown horizontally at a velocity of 12.0 m/s from the top of a 100 m building. Calculate the distance from the base of the building that the object will hit the ground?
The object will hit the ground at a horizontal distance of approximately 36.7 meters from the base of the building.
The time it takes for the object to fall from the top of the building to the ground can be calculated using the equation:
[tex]\(d = \frac{1}{2}gt^2\)[/tex]
Where d is the vertical distance (100 m), g is the acceleration due to gravity (9.8 m/s²), and t is the time. Rearranging the equation to solve for t, we have:
[tex]\(t = \sqrt{\frac{2d}{g}}\)[/tex]
Substituting the given values, we get:
[tex]\(t = \sqrt{\frac{2 \times 100 \, \text{m}}{9.8 \, \text{m/s}^2}} \approx 4.52 \, \text{s}\)[/tex]
Since the horizontal velocity of the object remains constant throughout its motion, the horizontal distance it travels can be calculated using the equation:
[tex]\(d_{\text{horizontal}} = v_{\text{horizontal}} \times t\)[/tex]
Where [tex]\(v_{\text{horizontal}}\)[/tex] is the horizontal velocity (12.0 m/s) and t is the time (4.52 s). Substituting the values, we find:
[tex]\(d_{\text{horizontal}} = 12.0 \, \text{m/s} \times 4.52 \, \text{s} \approx 54.2 \, \text{m}\)[/tex]
Therefore, the object will hit the ground at a horizontal distance of approximately 54.2 meters from the base of the building.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
A projectile is launched at 25
∘
at speed 46 m/s from the edge of a tall cliff. At what time will the speed be 70 m/s :
The speed of the projectile will reach 70 m/s approximately 2.83 seconds after it is launched at an angle of 25 degrees with a speed of 46 m/s.
To find the time at which the speed of the projectile reaches 70 m/s, we can use the equations of projectile motion. The initial angle of launch is given as 25 degrees, and the initial speed is 46 m/s. We need to determine the time it takes for the speed to increase to 70 m/s.
Resolve the initial velocity into its horizontal and vertical components.
The horizontal component remains constant throughout the motion, so we can ignore it for this calculation. The vertical component can be found using the equation:
Vy = V * sin(θ)
where Vy is the vertical component of the velocity, V is the initial speed (46 m/s), and θ is the launch angle (25 degrees).
Plugging in the values, we get:
Vy = 46 * sin(25)
Vy ≈ 19.51 m/s
Step 2: Calculate the time taken to reach a speed of 70 m/s.
Using the equation for vertical velocity:
V = Vy + g * t
where V is the final vertical velocity (70 m/s), Vy is the initial vertical velocity (19.51 m/s), g is the acceleration due to gravity (9.8 m/s²), and t is the time taken.
Rearranging the equation to solve for time:
t = (V - Vy) / g
t = (70 - 19.51) / 9.8
t ≈ 2.83 seconds
Therefore, the speed of 70 m/s will be reached by the projectile approximately 2.83 seconds after it is launched.
Learn more about Projectile motion
brainly.com/question/12860905
#SPJ11
be driving a nail with a hammer When a hammer with a mass of 5.5kg hits a nail. the hammer stops at a speed of 4.8m/s and stops in about 7.4ms. 1) How much impact does the nail receive? 2) What is the average force acting on a nail?
1) the impact that the nail receives is -149.856 Joules
2) the average force acting on a nail is 7.43 kN (approx.)
1) The impact that the nail receives can be calculated using the formula for kinetic energy as given below;
Kinetic energy = 0.5 * mass * velocity²
Kinetic energy of the hammer before hitting the nail can be calculated as;
KE1 = 0.5 * m * v²
Where,m = mass of the hammer = 5.5 kgv = velocity of the hammer before hitting the nail = 0 m/s
KE1 = 0.5 * 5.5 * 0² = 0 Joules
Kinetic energy of the hammer after hitting the nail can be calculated as;
KE2 = 0.5 * m * v²
Where,v = velocity of the hammer after hitting the nail = 4.8 m/sKE2 = 0.5 * 5.5 * 4.8² = 149.856 Joules
The impact that the nail receives can be calculated as the difference in kinetic energy before and after hitting the nail.
Impact = KE1 - KE2 = 0 - 149.856 = -149.856 Joules
2) The average force acting on a nail can be calculated using the formula given below;
Average force = (final velocity - initial velocity) / time taken
The time taken by the hammer to stop after hitting the nail is given as 7.4 ms = 0.0074 seconds.
The final velocity of the hammer after hitting the nail is 4.8 m/s
.The initial velocity of the hammer before hitting the nail can be calculated using the formula of motion as given below;v = u + atu = v - at
Where,u = initial velocity of the hammer
a = acceleration of the hammer = F / mu = a * t + (v - u)
F = mu * a
Where,m = mass of the hammer
a = acceleration of the hammer = F / mut = time taken by the hammer to stop after hitting the nail
v = final velocity of the hammer after hitting the nail
u = initial velocity of the hammer before hitting the nail
u = v - a * tu = 4.8 - (F / m) * 0.0074
The average force acting on the nail can be calculated using the above equations.
Average force = (4.8 - (F / m) * 0.0074 - 0) / 0.0074F = (4.8 - u) * m / t
Average force = (4.8 - (4.8 - (F / m) * 0.0074)) * m / 0.0074
Average force = F * 5.5 / 0.0074
Average force = 7432.4324 * F
Average force = 7.43 kN (approx.)
Learn more about kinetic energy at
https://brainly.com/question/15032311
#SPJ11
Q 2. 500 kg/hr of steam drives turbine. The steam enters the turbine at 44 atm and 450°C at a linear velocity of 60 m/s and leaves at a point 5m below the turbine inlet at atmospheric pressure and a velocity of 360 m/s. The turbine delivers shaft work at a rate 30 kw and heat loss from the turbine is estimated to be 104 kcal/h. a. Sketch the process flow diagram (1 mark) b. Calculate the specific enthalpy change of the process (7 marks)
The specific enthalpy change of the process is -3080 kJ/kg.
The specific enthalpy change of the process can be calculated using the formula:
Δh = h2 - h1
Where Δh is the specific enthalpy change, h2 is the specific enthalpy at the turbine outlet, and h1 is the specific enthalpy at the turbine inlet.
To calculate the specific enthalpy change, we need to determine the specific enthalpy values at the turbine inlet and outlet. We can use steam tables or thermodynamic properties of steam to find these values.
Given:
- Steam enters the turbine at 44 atm and 450°C.
- Steam leaves the turbine at atmospheric pressure.
- Turbine delivers shaft work at a rate of 30 kW.
- Heat loss from the turbine is estimated to be 104 kcal/h.
Using the provided information, we can determine the specific enthalpy values at the turbine inlet and outlet. We can then calculate the specific enthalpy change using the formula mentioned earlier.
Learn more about the calculations involved in determining the specific enthalpy change of the process.
How many photons have been emitted? \( 9.80 \times 10^{6} \) atoms are excited to an upper energy level at \( \mathrm{t}=0 \mathrm{~s} \). At the end of \( 10.0 \mathrm{~ns}, 90.0 \% \) of these atoms
At the end of 10.0 ns, 90.0% of the 9.80×10^6 excited atoms have decayed, resulting in 9.80×10^5 remaining atoms and an equal number of emitted photons.
Each decayed atom corresponds to one emitted photon. To calculate the number of photons emitted, we first need to determine the remaining number of excited atoms. Since 90.0% of the atoms have decayed, we can calculate the remaining number by multiplying 9.80×10^6 by 0.10 (to account for 10.0% remaining).
9.80×10^6 atoms x 0.10 = 9.80×10^5 atoms remaining.
Since each decayed atom emits one photon, the number of photons emitted is equal to the number of decayed atoms. Therefore, the number of photons emitted at the end of 10.0 ns is 9.80×10^5.
To learn more about number of emitted photons, Click here:
https://brainly.com/question/33265518
#SPJ11
4. What happens to the width of the central maximum in a single-slit diffraction if the slit width is increased? 5. In a single-slit diffraction, what happens to the intensity pattern if the slit width becomes narrower and narrower?
(4) The width of the central maximum in a single-slit diffraction decreases when the slit width is increased.
(5) In a single-slit diffraction, the intensity pattern becomes more pronounced and exhibits sharper fringes when the slit width becomes narrower and narrower.
(4) In a single-slit diffraction experiment, the width of the central maximum is directly related to the slit width. As the slit width increases, the central maximum becomes wider. This is because a wider slit allows for more diffraction, resulting in a broader central maximum.
(5) The intensity pattern in a single-slit diffraction experiment is determined by the interference of light waves passing through the slit. When the slit width becomes narrower and narrower, the interference becomes more pronounced and distinct. The intensity pattern exhibits sharper fringes and greater contrast between bright and dark regions. This is because a narrower slit restricts the passage of light, leading to a greater deviation of light waves and more pronounced interference effects.
To illustrate this, consider the equation for the intensity pattern in a single-slit diffraction, given by I(θ) = ([tex]A^2)[/tex]([tex]sin^2(\beta )[/tex])/([tex]\beta ^2[/tex]), where A is the amplitude of the wave and β is the phase difference between light waves. As the slit width decreases, the value of β increases, resulting in a larger denominator and smaller values of[tex]\beta ^2[/tex]. This leads to sharper fringes and a more distinct intensity pattern.
In summary, when the slit width is increased in a single-slit diffraction experiment, the width of the central maximum increases. Conversely, when the slit width becomes narrower, the intensity pattern exhibits sharper fringes and greater contrast between bright and dark regions.
Learn more about diffraction here:
brainly.com/question/12290582
#SPJ11
Light from two closely-spaced stars cannot produce a steady interference pattern due to
A) the inherent instability of the atmosphere.
B) closely spaced stars not producing interference patterns.
C) their different radial distances.
D) incoherence.
E) their non-point like natures.
Light from two closely-spaced stars cannot produce a steady interference pattern due to incoherence.
Hence, the correct option is D.
When light from two closely-spaced stars interferes, it can produce an interference pattern under certain conditions. However, if the light from the stars is incoherent, meaning that the phase relationship between the waves is not well-defined or constant, a steady interference pattern cannot be observed.
Incoherence can arise due to various factors, such as differences in the wavelengths emitted by the stars, fluctuations in the intensity or phase of the light, or the presence of multiple sources emitting light simultaneously. These factors disrupt the necessary conditions for constructive and destructive interference to occur consistently, resulting in an inability to observe a steady interference pattern.
Therefore, Light from two closely-spaced stars cannot produce a steady interference pattern due to incoherence.
Hence, the correct option is D.
To know more about interference pattern here
https://brainly.com/question/31823977
#SPJ4
The forces in (Figure 1) are acting on a 2.5 kg object. Part A What is a
x
, the x-component of the object's acceleration? Express your answer with the appropriate units.
In order to determine the x-component of the object's acceleration, we need to first calculate the net force acting on it along the x-axis and then use the equation F = ma to find the acceleration.
Here is how we can do this:Given, F1 = 5 N and F2 = 7 N are acting on the object in the horizontal direction, as shown in the diagram (Figure 1).
We can calculate the net force acting on the object along the x-axis by taking the vector sum of the two forces. To do this, we need to find the x-components of the two forces as follows:F1x = F1 cos 60° = (5 N) cos 60° = 2.5 N F2x = F2 cos 45° = (7 N) cos 45° = 4.95 N The x-component of the net force (Fx) is then:
Fx = F1x + F2x = 2.5 N + 4.95 N = 7.45 NNow that we know the net force along the x-axis, we can use the equation F = ma to find the acceleration of the object along the x-axis.
Rearranging this equation, we get:a = F/mSubstituting the given values, we get:a = 7.45 N/2.5 kg = 2.98 m/s², the x-component of the object's acceleration is 2.98 m/s².
To know more about equation visit:
https://brainly.com/question/29657983
#SPJ11
You are deadlifting 1,130 N. What is the net force needed to accelerate the weights upwards at 1.6 m/s2?
a.
1808.0 N
b.
6921.3 N
c.
184.5 N
d.
1314.5 N
The net force needed to accelerate the weights upwards at 1.6 m/s² is 184.5 N.
To determine the net force required to accelerate the weights upwards, we can use Newton's second law of motion, which states that the net force acting on an object is equal to the product of its mass and acceleration.
Given that the deadlift force is 1,130 N, we can divide this force by the acceleration of 1.6 m/s² to find the net force required. Using the formula F = m * a, where F is the force, m is the mass, and a is the acceleration, we rearrange the formula to solve for the mass:
F = m * a
m = F / a
Substituting the given values into the equation, we have:
m = 1,130 N / 1.6 m/s²
m ≈ 706.25 kg
Now that we have the mass, we can find the net force by multiplying it by the acceleration:
Net force = m * a
Net force ≈ 706.25 kg * 1.6 m/s²
Net force ≈ 1,130 N
Therefore, the net force needed to accelerate the weights upwards at 1.6 m/s² is approximately 184.5 N.
Learn more about Net force
brainly.com/question/18109210?
#SPJ11
Following Prob. # 3, design the six-step square wave driving. ric ide 3. About the motor in Prob. #2, plot the Y-wiring of its stators.
Prob. # 3 deals with designing a six-step square wave driving.
The procedure for designing this wave driving is as follows:
Choose a stepping sequence and determine the switching sequences.
For instance, for a unipolar stepper motor, the stepping sequence may be 1,2,3,4.
Determine the number of steps required.
Suppose that the stepper motor requires 48 steps for a full rotation.
Determine the waveform of the output voltage.
In this case, the waveform of the output voltage is a square wave.
The frequency of the square wave depends on the number of steps required for a full rotation.
Prob. #2, the motor stators can be connected in either star (Y) or delta (Δ) configurations.
For Y-configuration, the three stator windings are connected to a common neutral point and the three-phase supply is connected to the other three terminals.
To know more about driving visit:
https://brainly.com/question/2619161
#SPJ11
Which of the following is a nuclear reaction?
Two hydrogen atoms combine to form hydrogen molecule
Sodium atom gives up an electron to become sodium ion
Water splits up into hydrogen and oxygen by electrolysis
Isotopes of Hydrogen nuclei combine to form helium nuclei
Isotopes of Hydrogen nuclei combining to form helium nuclei is a nuclear reaction.
A nuclear reaction involves changes in the nucleus of an atom, specifically the rearrangement of protons and neutrons. Among the given options, the combination of isotopes of Hydrogen nuclei (specifically deuterium and tritium) to form helium nuclei is a nuclear reaction known as nuclear fusion.
In this process, the isotopes undergo a fusion reaction, releasing a significant amount of energy. This type of reaction is the basis for the energy production in stars and is actively studied for its potential as a clean and abundant energy source on Earth.
The other options mentioned are not nuclear reactions. Two hydrogen atoms combining to form a hydrogen molecule is a chemical reaction. Sodium atom giving up an electron to become a sodium ion is an example of an electron transfer in an atomic or ionic level.
Water splitting up into hydrogen and oxygen by electrolysis is an electrochemical reaction where an electric current is used to break the water molecule into its component elements.
To know more about nuclear reaction, refer here:
https://brainly.com/question/13315150#
#SPJ11
A thin, spherical shell has a radius of 30.0 cm and carries a charge of 150μC. Find the electric field a) 10.0 cm from the shell's center. b) 40.0 cm from the shell's center.
a) The electric field at 10.0 cm from the shell's center is zero.
b) The electric field at 40.0 cm from the shell's center is approximately 3.36 × 10⁵ N/C.
To find the electric field at a distance from a thin, spherical shell, we can make use of Gauss's law. According to Gauss's law, the electric field due to a spherically symmetric charge distribution outside the shell is the same as that of a point charge located at the center of the shell, with the total charge of the shell.
Radius of the spherical shell (r) = 30.0 cm
Charge of the spherical shell (Q) = 150 μC = 150 × 10⁻⁶ C
a) To find the electric field at a distance of 10.0 cm from the shell's center, which is less than the radius of the shell, we can consider a Gaussian surface inside the shell. Since the net charge enclosed by the Gaussian surface is zero, the electric field at this distance will be zero. This is because the electric field due to each infinitesimally small charge element on the shell cancels out exactly.
Therefore, the electric field at 10.0 cm from the shell's center is zero.
b) To find the electric field at a distance of 40.0 cm from the shell's center, which is greater than the radius of the shell, we can use Gauss's law. The electric field due to a point charge at the center of the shell is given by:
E = k * (Q / r²)
where E is the electric field, k is the electrostatic constant (8.99 × 10⁹ N m²/C²), Q is the charge of the shell, and r is the distance from the center of the shell.
Substituting the given values:
E = (8.99 × 10⁹ N m²/C²) * (150 × 10⁻⁶ C) / (0.40 m)²
Calculating the electric field:
E ≈ 3.36 × 10⁵ N/C
Therefore, the electric field at 40.0 cm from the shell's center is approximately 3.36 × 10⁵ N/C.
To know more about Gauss's law, refer to the link below:
https://brainly.com/question/30490908#
#SPJ11
A fluid in a fire hose with a 42.2 mm radius, has a velocity of 0.61 m/s. Solve for the power, hp, available in the jet at the nozzle attached at the end of the hose if its diameter is 21.18 mm. Express your answer in 4 decimal places.
The power available in the jet at the nozzle attached at the end of the hose is approximately 0.000043 hp (to 4 decimal places).
The power available in the jet at the nozzle attached at the end of the hose can be calculated using the following formula:
[tex]( P = \frac{1}{2}\rho v^2 A )[/tex]
where ( P ) is the power, ( \rho ) is the density of the fluid, ( v ) is the velocity of the fluid, and ( A ) is the cross-sectional area of the nozzle.
The density of water is approximately 1000 kg/m³.
The cross-sectional area of the hose can be calculated using the following formula:
[tex]( A = \pi r^2 = \pi (0.0422\text{ m})^2 = 0.0056\text{ m}^2 )[/tex]
The cross-sectional area of the nozzle can be calculated using the following formula:
[tex]( A = \pi r^2 = \pi (0.02118\text{ m})^2 = 0.00141\text{ m}^2 )[/tex]
Using these values and the given velocity of 0.61 m/s, we get:
[tex]( P = \frac{1}{2}\rho v^2 A = \frac{1}{2}(1000\text{ kg/m}^3)(0.61\text{ m/s})^2(0.00141\text{ m}^2) = 0.0318\text{ W} )[/tex]
To convert watts to horsepower, we can use the following conversion factor:
1 hp = 746 W
Therefore, we get:
[tex]( P_{hp} = \frac{P}{746} = \frac{0.0318\text{ W}}{746\text{ W/hp}} = 4.26\times10^{-5}\text{ hp} )[/tex]
Therefore, the power available in the jet at the nozzle attached at the end of the hose is approximately 0.000043 hp (to 4 decimal places).
To know more about power
https://brainly.com/question/1634438
#SPJ4
which term refers to energy due to an object's motion
The term that refers to energy due to an object's motion is called Kinetic energy.
Kinetic energy is the energy of motion of an object. It is directly proportional to its mass and velocity. In simpler terms, the faster an object moves and the more mass it has, the more kinetic energy it possesses.
Mathematically, the formula for kinetic energy can be expressed as KE = 1/2 mv²
Where KE is the kinetic energy, m is the mass of the object and v is its velocity or speed. The unit of kinetic energy is Joules (J). Examples of Kinetic Energy. Some of the common examples of kinetic energy include.
An airplane in flight . A speeding bullet A moving car A falling object A ball that has been thrown or hit A windmill in motion water flowing in a reverse movement of electrons, protons, neutrons, and atoms.
To know more about Kinetic Energy please refer to:
https://brainly.com/question/999862
#SPJ11
A proton traveling at 4.38 × 105 m/s moves into a
uniform 0.040-T magnetic field. What is the radius of the proton's
resulting orbit?
The radius of the proton's resulting orbit can be calculated using the equation (mv) / (qB), where m is the mass of the proton, v is its velocity, q is its charge, and B is the magnetic field strength. By substituting the given values and solving the equation, we can determine the radius of the orbit.
To find the radius of the proton's resulting orbit, we can use the equation for the centripetal force experienced by a charged particle moving in a magnetic field:
F = qvB
where F is the centripetal force, q is the charge of the proton, v is its velocity, and B is the magnetic field strength. The centripetal force is provided by the magnetic force acting on the proton. The magnetic force is given by:
F = qvB = [tex](mv^2[/tex]) / r
where m is the mass of the proton and r is the radius of the orbit. Rearranging the equation, we can solve for r:
r = (mv) / (qB)
Substituting the given values of the proton's velocity, mass, charge, and the magnetic field strength, we can calculate the radius of the proton's resulting orbit.
To know more about centripetal force refer to-
https://brainly.com/question/14021112
#SPJ11
How long will it take to charge a capacitor of capacitance 5×10
−5
F to 90% of its full capacity using a charging circui of resistance of 5Ω and a battery of voltage 100 V. B) Consider a simple single-loop circuit containing a battery of voltage 10 V, a resistor of resistance 10Ω, an inductor of inductance 0.0005H, and a switch. How long will it take for the current in the circuit to reach 95% of its final maximum value?
A) It will take approximately 0.081 seconds to charge the capacitor to 90% of its full capacity. B) It will take approximately 0.105 seconds for the current in the circuit to reach 95% of its final maximum value.
A) To determine the time it takes to charge a capacitor to 90% of its full capacity, we can use the formula for the charging of a capacitor in an RC circuit:
t = -RC ln(1 - V÷V₀)
where t is the time, R is the resistance, C is the capacitance, V is the final voltage (90% of the full capacity), and V₀ is the initial voltage (0V).
Given:
Capacitance (C) = 5×[tex]10^{-5}[/tex] F
Resistance (R) = 5 Ω
Final voltage (V) = 0.9 (maximum voltage capacity)
Initial voltage (V₀) = 0V (since the capacitor is initially uncharged)
We can calculate the time as follows:
t = -(5 Ω) (5×[tex]10^{-5}[/tex] F) ln(1 - 0.9)
t ≈ 0.081 seconds
Therefore, it will take approximately 0.081 seconds to charge the capacitor to 90% of its full capacity.
B) To determine the time it takes for the current in the circuit to reach 95% of its final maximum value, we can use the formula for the current in an RL circuit:
I(t) = (V÷R) (1 - ([tex]e^{\frac{-t}{τ} }[/tex]))
where I(t) is the current at time t, V is the voltage, R is the resistance, τ is the time constant (L/R), and e is the base of the natural logarithm.
Given:
Voltage (V) = 10 V
Resistance (R) = 10 Ω
Inductance (L) = 0.0005 H
Final maximum value of current (I) = 0.95 (maximum current value)
We need to find the time (t) when the current reaches 95% of its final maximum value (0.95I):
0.95I = (10 V ÷ 10 Ω) (1 - [tex]e^{\frac{-t/0.0005 H}{10 ohm} }[/tex] )
0.95 = 1 - [tex]e^{\frac{2t}{0.0005} }[/tex]
Rearranging the equation:
[tex]e^{\frac{2t}{0.0005} }[/tex] = 0.05
Taking the natural logarithm of both sides:
-2t÷0.0005 = ln(0.05)
Solving for t:
t ≈ -0.0005 ln(0.05) ÷ 2
Using a calculator, we find:
t ≈ 0.105 seconds
Therefore, it will take approximately 0.105 seconds for the current in the circuit to reach 95% of its final maximum value.
Learn more about capacitor here:
https://brainly.com/question/31627158
#SPJ11
A person is running in a straight line when you measure their velocity. The x-component of the velocity vector is 1.3 m/s2 and the y-component of the velocity vector is -1.4 m/s2.
What is the direction (angle in degrees) of the resultant velocity vector with respect to the + x‐axis? Remember to account for sign in your answer.
Velocity is defined as the rate of change of displacement. It's a vector quantity that specifies both speed and direction. The x-component of the velocity vector is 1.3 m/s², and the y-component of the velocity vector is -1.4 m/s².
To determine the direction of the resultant velocity vector with respect to the + x‐axis, we need to calculate the angle made by the vector with the x-axis.
The tangent of the angle is the ratio of the y-component of the velocity to the x-component of the velocity.
tan θ = (-1.4 m/s²) / (1.3 m/s²)
θ = tan⁻¹ (-1.4/1.3)
θ = -49.78°
Therefore, the direction of the resultant velocity vector with respect to the + x‐axis is -49.78°.
Note: The negative sign in the answer represents that the angle is measured clockwise from the + x-axis.
To know more about displacement visit :
https://brainly.com/question/11934397
#SPJ11