17. The mass of the clay dropped on the hoop's rim is approximately 0.42 kg.
18. The spring constant of the bungee cord is approximately 67.3 N/m.
19. The speed of the mass in the spring-mass system when the displacement is 1.86 m is approximately 3.99 m/s.
Question 17: To find the mass of the clay, we need to use the principle of conservation of angular momentum. The initial angular momentum of the hoop is equal to the final angular momentum of the hoop and the clay combined. The formula for angular momentum is given by:
L = Iω
where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.
The moment of inertia of a hoop rotating about its axis is given by:
I_hoop = MR²
where M is the mass of the hoop and R is the radius.
Initially, the angular momentum of the hoop is:
L_initial = I_hoop * ω_initial
Finally, the angular momentum of the hoop and clay combined is:
L_final = (I_hoop + I_clay) * ω_final
Since the clay is dropped onto the rim of the hoop, its moment of inertia is negligible compared to the hoop's moment of inertia. Thus, we can ignore the moment of inertia of the clay (I_clay) in the final angular momentum calculation.
Setting the initial and final angular momenta equal, we have:
L_initial = L_final
I_hoop * ω_initial = (I_hoop + I_clay) * ω_final
Substituting the given values:
M = 1.20 kg (mass of the hoop)
R = 5 m (radius of the hoop)
ω_initial = 40.0 rpm = (40.0 rev/min) * (2π rad/rev) * (1 min/60 s)
ω_final = 32.0 rpm = (32.0 rev/min) * (2π rad/rev) * (1 min/60 s)
Now we can solve for the mass of the clay:
M * R² * ω_initial = (M * R² + I_clay) * ω_final
Simplifying, we have:
M * R² * ω_initial = M * R² * ω_final
Canceling out the common terms:
ω_initial = ω_final
Substituting the given values and solving for M (mass of the clay):
1.20 kg * (5 m)² * [(40.0 rev/min) * (2π rad/rev) * (1 min/60 s)] = 1.20 kg * (5 m)² * [(32.0 rev/min) * (2π rad/rev) * (1 min/60 s)]
Simplifying and solving for M:
M = [1.20 kg * (5 m)² * [(40.0 rev/min) * (2π rad/rev) * (1 min/60 s)]] / [(5 m)² * [(32.0 rev/min) * (2π rad/rev) * (1 min/60 s)]]
M ≈ 0.42 kg
Therefore, the mass of the clay is approximately 0.42 kg.
Question 18: The spring constant (force constant) of the bungee cord can be calculated using the formula for the period (T) of oscillation:
T = 2π * √(m / k)
where T is the period, m is the mass, and k is the spring constant.
m = 53.4 kg (mass of the bungee jumper)
T = 12.6 s (period of oscillation)
Rearranging the equation, we have:
k = (4π² * m) / T²
Substituting the given values, we can calculate the spring constant (force constant):
k = (4π² * 53.4 kg) / (12.6 s)²
k ≈ 67.3 N/m
Therefore, the spring constant (force constant) of the bungee cord is approximately 67.3 N/m.
Question 19: The speed of the mass in a spring-mass system can be calculated using the formula:
v = ω * A
where v is the speed, ω is the angular frequency, and A is the amplitude (maximum displacement).
The angular frequency (ω) can be found using the formula:
ω = 2π / T
where T is the period.
T = 3.73 s (period of oscillation)
A = 4.75 m (amplitude)
Substituting the given values, we can calculate the angular frequency (ω):
ω = 2π / 3.73 s
Now we can calculate the speed (v) at the instant when the displacement is 1.86 m:
v = ω * 1.86 m
Substituting the calculated value of ω, we can find the speed:
v ≈ (2π / 3.73 s) * 1.86 m
v ≈ 3.99 m/s
Therefore, the speed of the mass at the instant when the displacement is 1.86 m is approximately 3.99 m/s.
To know more about conservation of angular momentum, refer to the link below:
https://brainly.com/question/29490733#
#SPJ11
A scientist illuminates a 0.46 mm-wide slit with light characterized by λ=472 nm, and this results in a diffraction pattern forming upon a screen located 110 cm from the slit assembly. Compute the width of the first and second maxima (or bright fringes) on one side of the central peak. (Enter your answer in mm.)
w 1=w 2=mm(1 st maxima) mm(2 nd maxima )
The width of the first and second maxima on one side of the central peak is approximately 1.1365 mm.
To calculate the width of the first and second maxima (or bright fringes) on one side of the central peak in a diffraction pattern, we can use the formula:
w = (λ * D) / (d)
Where:
w is the width of the maxima (in mm),
λ is the wavelength of light (in nm),
D is the distance between the slit and the screen (in cm),
d is the width of the slit (in mm).
Given:
λ = 472 nm,
D = 110 cm,
d = 0.46 mm.
First, let's convert the units to match the formula:
λ = 472 nm = 0.472 μm (micrometers),
D = 110 cm = 1100 mm,
d = 0.46 mm.
Now, we can substitute these values into the formula to calculate the width of the first and second maxima:
w₁ = (0.472 μm * 1100 mm) / (0.46 mm)
w₂ = (0.472 μm * 1100 mm) / (0.46 mm)
To calculate the width of the first and second maxima, let's perform the calculations:
w₁ = (0.472 μm * 1100 mm) / (0.46 mm)
= 1136.5217 μm
= 1.1365 mm (rounded to four decimal places)
w₂ = (0.472 μm * 1100 mm) / (0.46 mm)
= 1136.5217 μm
= 1.1365 mm (rounded to four decimal places)
Therefore, the width of the first and second maxima on one side of the central peak is approximately 1.1365 mm.
Learn more about Central Peak at
brainly.com/question/32153683
#SPJ4
block of mass M and table? 0.45 0.25 0.75 0.50
To find the mass of the block (M), we can equate the maximum static friction force (fstatic max) to the component of the gravitational force acting down the slope.
Given:
Coefficient of static friction (μs) = 0.50
Angle of inclination (θ) = 45°
The maximum static friction force is given by:
fstatic max = μsN
where N is the normal force.
The normal force can be calculated as:
N = Mg cos θ
where M is the mass of the block and g is the acceleration due to gravity.
The component of the gravitational force down the slope is given by:
Mg sin θ
Setting fstatic max equal to Mg sin θ, we have:
μsN = Mg sin θ
μs(Mg cos θ) = Mg sin θ
μs cos θ = sin θ
μs = sin θ / cos θ
Now, substituting the given values:
0.50 = sin 45° / cos 45°
Using the trigonometric identity sin θ / cos θ = tan θ, we have:
0.50 = tan 45°
Taking the inverse tangent (arctan) of both sides, we find:
45° = arctan(0.50)
Therefore, the correct mass of the block is approximately 0.391 kg.
To know more about gravitational force visit:
https://brainly.com/question/32609171
#SPJ11
I have a child on a see-saw. The angle between the ground and the plank is 250. Draw a free body diagram. If the child has a mass of 23kg, what is the normal force acting on the child? What is the component of gravity along the see-saw? If the see-saw is taken up to 32°, the ct just begins to slide at a constant velocity, what is the coefficient of friction between the child and the see-saw?
To draw a free body diagram, we consider the forces acting on the child on the see-saw:
1. The weight of the child acts vertically downward. We can break it into two components:
a) The component perpendicular to the see-saw is the normal force, which counteracts the child's weight.
b) The component parallel to the see-saw is the force due to gravity along the see-saw.
2. The normal force acts vertically upward, exerted by the see-saw on the child.
3. The force of friction may act between the child and the see-saw, but its direction depends on the conditions specified.
Given that the angle between the ground and the plank is 25°, the normal force is equal to the component of the child's weight perpendicular to the see-saw, which is given by N = mg cos(25°), where m is the mass of the child (23 kg) and g is the acceleration due to gravity (9.8 m/s^2).
The component of gravity along the see-saw is given by F_parallel = mg sin(25°).
To determine the coefficient of friction, more information is needed, such as the force required to keep the see-saw at a constant velocity or the angle at which the see-saw just begins to slide.
To learn more about free body diagram, you can visit
brainly.com/question/31795573
#SPJ11.
A particle in uniform circular motion requires a net force acting in what direction? A. Towards the center of the circle. B. In the direction of velocity. C. Opposite the direction of the velocity. D. Away from the center of the circle. E. Upward. F. Downward
A particle in uniform circular motion requires a net force acting towards the center of the circle. So option A is correct.
The net force acting on a particle moving in a circular path is always directed towards the center of the circle. The motion of a particle in a circular path is characterized by the direction of its velocity and acceleration at each instant in time. These two vectors are always perpendicular to each other.The magnitude of the net force required to keep a particle in uniform circular motion depends on the mass of the particle and its velocity, as well as the radius of the circular path it is following. This force is referred to as the centripetal force and is always directed towards the center of the circle.The centripetal force is provided by some other object, such as a string or a gravitational field, which acts to pull the particle towards the center of the circle. Without this force, the particle would continue to move in a straight line tangent to the circle, rather than in a circular path.Therefore option A is correct.
To learn more about centripetal force visit: https://brainly.com/question/898360
#SPJ11
From what I have understood Einstein deduced the A and B
coefficient for spontaneous respectively stimulated emission to
match the observed blackbody radiation/Planck spectrum. How did he
do this?
Einstein deduced the A and B coefficients for spontaneous and stimulated emission by considering the behavior of atoms in an electromagnetic field. He proposed that atoms can absorb and emit energy in discrete packets called photons.
To match the observed blackbody radiation or Planck spectrum, Einstein made the following key assumptions:
Atoms can undergo spontaneous emission, where an excited atom spontaneously emits a photon without any external influence.
Atoms can also undergo stimulated emission, where an incident photon triggers the emission of an additional photon with the same energy, phase, and direction.
The probability of stimulated emission is proportional to the intensity of the incident radiation.
By applying these assumptions and considering the principles of statistical mechanics, Einstein derived the equations that relate the A and B coefficients to the intensity and frequency of the radiation. The A coefficient represents the rate of spontaneous emission, while the B coefficient represents the rate of stimulated emission.
Einstein's work provided a theoretical foundation for understanding the behavior of atoms in electromagnetic fields and played a crucial role in the development of quantum mechanics.
To know more about electromagnetic field refer to-
https://brainly.com/question/13967686
#SPJ11
Which of the following statement is CORRECTLY defining equivalent couples?
A. couples with the same moment but having different forces and perpendicular distances
B. couples having different forces and perpendicular distances
C. couples even when are shifted, still have the same moment at a given point
D. couples with the same moment but different forces
E. moment which is characterized by two equal and opposite forces separated by a perpendicular distance
Expert Answer
Top Expert
500+ questions answered
Couples are going to be formed when two equal and opposite fo…View the full answer
answer image blur
Previous question
Next question
The correct statement defining equivalent couples is option C, which states that couples, even when shifted, still have the same moment at a given point.
Equivalent couples refer to a system of forces that produce the same moment or turning effect about a point, regardless of their spatial arrangement. In other words, the moment produced by these couples remains constant, even if they are shifted. Option C correctly defines equivalent couples by highlighting this characteristic.
Option A states that equivalent couples have the same moment but different forces and perpendicular distances. This is incorrect because equivalent couples can have different forces and distances as long as their moments are the same. Therefore, option A is not the correct definition.
Option B states that couples have different forces and perpendicular distances, but it does not address the crucial aspect of equivalent couples having the same moment. Thus, option B is incorrect.
Option D states that equivalent couples have the same moment but different forces. However, this definition neglects the importance of the perpendicular distances between the forces. Therefore, option D is not the correct definition.
Option E defines a moment that is characterized by two equal and opposite forces separated by a perpendicular distance. While this describes a couple, it does not specify the condition of the moment remaining the same when shifted. Hence, option E is also incorrect.
To summarize, option C correctly defines equivalent couples by emphasizing that they maintain the same moment at a given point, even when shifted. This is an accurate description of equivalent couples.
Learn more about couples here:
https://brainly.com/question/14663269
#SPJ11
If a hose is capable of creating 85 lbs of force at a 25 ft distance, what is its initial PSI?
A hose is capable of creating 85 lbs of force at a 25 ft distance. Its initial PSI is approximately 10.82 PSI on a 25 feet distance based calculation.
To determine the initial PSI (Pounds per Square Inch) of a hose based on the force it generates and the distance, we need to use the concept of work done by the hose.
The work done by the hose can be calculated using the formula:
Work = Force × Distance
Given that the force is 85 lbs and the distance is 25 ft, we can substitute these values into the equation:
Work = 85 lbs × 25 ft
Now, to calculate the initial PSI, we need to convert the units. Since work is equal to force multiplied by distance, we can express work in foot-pounds (ft-lbs).
To convert foot-pounds (ft-lbs) to inch-pounds (in-lbs), we multiply by 12, as there are 12 inches in a foot:
Work (in-lbs) = Work (ft-lbs) × 12
So, the equation becomes:
Work (in-lbs) = (85 lbs × 25 ft) × 12
Given that 2.31 feet of head is equal to 1 PSI, and the distance is 25 feet, we can calculate the equivalent PSI.
Pressure (PSI) = Distance (feet) / 2.31
Pressure (PSI) = 25 feet / 2.31
Pressure (PSI) ≈ 10.82 PSI
Therefore, the initial PSI of the hose, based on a distance of 25 feet, is approximately 10.82 PSI.
Learn more about PSI here:
https://brainly.com/question/14621647
#SPJ11
windchill represents the combined effect of ambient temperature and wind speed.
Windchill represents the combined effect of ambient temperature and wind speed.
Windchill is a measure of how cold it feels outside due to the combined effect of ambient temperature and wind speed. It takes into account the fact that wind increases the rate of heat loss from exposed skin, making the air temperature feel colder than it actually is.
When wind blows over our skin, it carries away the heat that our bodies produce, leading to a more rapid cooling effect. As a result, even if the actual air temperature is above freezing, the wind can make it feel much colder.
Meteorologists use a wind chill index or formula to calculate the perceived temperature based on the actual air temperature and wind speed. The wind chill index provides an estimation of how cold it feels to the human body and helps people understand the potential impact on their comfort and safety when exposed to cold and windy conditions.
It's worth noting that different regions and countries may use different formulas or indices to calculate wind chill, but the underlying concept remains the same: windchill combines the effects of temperature and wind speed to assess the perceived coldness.
To know more about Windchill here
https://brainly.com/question/32216567
#SPJ4
if the acceleration of a system is zero, are the internal systems net forces also zero
The net force on an object is determined by the sum of all the external forces acting on it, while the acceleration is determined by the net force divided by the mass of the object.
When the acceleration of a system is zero, it means that the system is either at rest or moving at a constant velocity. In such cases, the net force on the system must be zero according to Newton's second law, which states that the net force is equal to the product of mass and acceleration.
However, the internal forces within the system can still exist and exert forces on each other. These internal forces can cancel each other out, resulting in a zero net force on the system. For example, in a balanced tug-of-war between two teams, the net force on the rope is zero even though the teams are applying forces in opposite directions.
Learn more about acceleration here:
https://brainly.com/question/2303856
#SPJ11
A Sledding Contest. You are in a sledding contest where you start at a height of 50.0 m above the bottom of a valley and slide down a hill that makes an angle of 25.0
∘
with respect to the horizontal. When you reach the valley, you immediately climb a second hill that makes an angle of 15.0
∘
with respect to the horizontal. The winner of the contest will be the contestant who travels the greatest distance up the second hill. You must now choose between using your flat-bottomed plastic sled, or your "Blade Runner," which glides on two steel rails. The hill you will ride down is covered with loose snow. However, the hill you will climb on the other side is a popular sledding hill, and is packed hard and is slick. The two sleds perform very differently on the two surfaces, the plastic one performing better on loose snow, and the Blade Runner doing better on hard-packed snow or ice. The performances of each sled can be quantified in terms of their respective coefficients of kinetic friction on the two surfaces. For the plastic sled: μ= 0.17 on loose snow and μ=0.15 on packed snow or ice. For the Blade Runner, μ=0.19 on loose snow and μ=0.09 on packed snow or ice. Assuming the two hills are shaped like inclined planes, and neglecting air resistance, (a) how far does each sled make it up the second hill before stopping? (b) Assuming the total mass of the sled plus rider is 55.0 kg in both cases, how much work is done by nonconservative forces (over the total trip) in each case? (b) For the flat-bottomed plastic sled: Number Units For the "Blade Runner" sled: Number Units
The work done by nonconservative forces (over the total trip) for the flat-bottomed plastic sled is 1403.43 J and for the "Blade Runner" sled is 1707.57 J.
(a) Distance traveled by each sled up the hill before stopping is given below:
Plastic Sled: The force of gravity, frictional force, and the normal force acting on the sled can be resolved into components parallel and perpendicular to the slope. Here, the force of gravity (mg) acts straight down the slope and can be resolved into two components.
One component (mg sin 25°) is parallel to the slope and the other component (mg cos 25°) is perpendicular to the slope. The normal force (N) acting on the sled is perpendicular to the slope, and it can be resolved into two components. One component (N sin 25°) is parallel to the slope and the other component (N cos 25°) is perpendicular to the slope.
Frictional force (f) acting on the sled is given by:
f = μN From the diagram, it is observed that sin 25° = (50 - d)/x, where d is the horizontal distance traveled by the sled down the slope (i.e., the distance between the start and end points), and x is the length of the slope, which is given by x = 50/sin 25°
= 116.26 m.
Therefore, d = x sin 25°
= 50.15 m.
Similarly, cos 25° = h/x, where h is the vertical drop of the slope.
Therefore, h = x cos 25°
= 107.69 m.
Using the work-energy principle (neglecting air resistance), we can write:
mgh = Wf + 0.5mv2
where m is the total mass of the sled and rider, v is the speed of the sled at the end of the slope, and Wf is the work done by the frictional force (f) over the distance traveled by the sled.
Therefore, we can write:
Wf = f × d The kinetic energy of the sled at the bottom of the slope is given by:
KE = 0.5mv2
where v is the speed of the sled at the bottom of the slope.
Therefore, we can write:
v2 = 2gh - (2f/m) × d
Using the value of g = 9.81 m/s2 and the given values of μ, we can find the value of f for loose snow:
f = μN
= μmg cos 25°
Therefore, f = 0.17 × 55 × 9.81 × cos 25
° = 88.64 N
And the value of f for packed snow or ice:
f = μN
= μmg cos 15°
Therefore, f = 0.15 × 55 × 9.81 × cos 15°
= 80.28 N
Substituting these values, we can find the speed of the sled at the end of the slope for loose snow:
v2 = 2gh - (2f/m) × dv2
= 2 × 9.81 × 107.69 - (2 × 88.64/55) × 50.15
Therefore, v = 20.89 m/s
And for packed snow or ice:
v2 = 2gh - (2f/m) × dv2 = 2 × 9.81 × 107.69 - (2 × 80.28/55) × 50.15
Therefore, v = 20.94 m/s
Using the value of the speed of the sled at the end of the slope and the work-energy principle, we can find the distance traveled by each sled up the hill before stopping. For the plastic sled:
KE = 0.5mv2
KE = 0.5 × 55 × 20.89²
KE = 12744.57 J
Since the sled is starting from rest, the initial kinetic energy is zero, and we can write: Wf + mgh = KE
Therefore, the work done by the nonconservative forces (frictional force) over the total trip is given by:
Wf = KE - mgh
Wf = 12744.57 - (55 × 9.81 × 50)Wf = 1403.43 J
Using the work-energy principle again, we can find the distance traveled by the sled up the hill before stopping:
KE = 0.5mv2
where v is the speed of the sled at the end of the slope. Therefore, we can write:v2 = 2gh - (2f/m) × dv2 = 2 × 9.81 × h - (2 × 88.64/55) × 50.15Therefore,h = 49.91 m
Therefore, the distance traveled by the plastic sled up the hill before stopping is 50.0 - 49.91 = 0.09 m.
For the Blade Runner:Using the value of the speed of the sled at the end of the slope and the work-energy principle, we can find the distance traveled by each sled up the hill before stopping.KE = 0.5mv2KE = 0.5 × 55 × 20.94²KE = 13048.17 J
Since the sled is starting from rest, the initial kinetic energy is zero, and we can write:
Wf + mgh = KE
Therefore, the work done by the nonconservative forces (frictional force) over the total trip is given by:
Wf = KE - mgh
Wf = 13048.17 - (55 × 9.81 × 50
)Wf = 1707.57 J
Using the work-energy principle again, we can find the distance traveled by the sled up the hill before stopping:
KE = 0.5mv2
where v is the speed of the sled at the end of the slope. Therefore, we can write:v2 = 2gh - (2f/m) × dv2 = 2 × 9.81 × h - (2 × 80.28/55) × 50.15Therefore,h = 62.45 m
Therefore, the distance traveled by the Blade Runner up the hill before stopping is 50.0 + 62.45 = 112.45 m.
(b)The work done by nonconservative forces (frictional force) over the total trip is given above:
For the plastic sled:
Wf = 1403.43 J
For the Blade Runner:
Wf = 1707.57 J
To learn more on kinetic energy :
https://brainly.com/question/25959744
#SPJ11
Two identical objects start falling from the same height at the same time. The first object was dropped straight down and the second object was thrown horizontally. Which one of the following options is the correct answer? (You may ignore air resistance). We need to know the initial velocity of the objects to see which one hits the ground first. They both hit the ground at the same time The second object hits the ground first. The first object hits the ground first.
Two identical objects start falling from the same height at the same time. The first object was dropped straight down and the second object was thrown horizontally. The correct statement is b).
We can break down the motion of the objects into vertical component and horizontal component. The vertical motion is influenced by the force of gravity, while the horizontal motion remains independent of the vertical motion.
For the first object dropped straight down, its initial vertical velocity is zero. It accelerates downward due to gravity at a rate of approximately 9.8 m/s². The equation describing its vertical motion is:
y = (1/2)gt²
where y is the vertical displacement, g is the acceleration due to gravity, and t is time. Since the object is dropped from rest, the initial displacement y₀ is also zero.For the second object thrown horizontally, its initial vertical velocity is also zero. However, its horizontal velocity is non-zero and remains constant throughout its motion. The horizontal motion follows:
x = vt
where x is the horizontal displacement, v is the horizontal velocity, and t is time.
Since the vertical motion of both objects is the same (initially zero velocity and constant acceleration due to gravity), the time it takes for each object to hit the ground is the same. The vertical displacements may be different due to the initial horizontal velocity of the second object, but the time of fall is equal.
Hence, the time it takes for both objects to hit the ground is the same, regardless of their initial velocities or horizontal motion. Therefore, "They both hit the ground at the same time" is the correct statement.
Learn more about vertical component here:
https://brainly.com/question/31684355
#SPJ11
A0.39-kg cord is stretched between two supports, 89 m * apart. When one support is struck try a hammer, a transverse wave travels down the cord and reaches the olher support in What is the tensien in the cord? 0.888 Express your answer using twe signifieant figuras. A 0.39−kg cord is stretched between two supports, 8.9 m
2
Part A apart. When one support is struck by a hammer, a transverse wave travels down the cord and reaches the other support in 0.88 s. What is the tension in the cord? Express your answer using two significant figures.
Given, mass of cord, m = 0.39 kg Distance between the two supports.
d = 8.9 m Time taken to reach other end, t = 0.88 s We know that the speed of wave on the cord,
v = d/t = 8.9/0.88 = 10.11 m/sUsing the formula for tension,
[tex]T = (m*v^2)/dWe get, T = (0.39 * 10.11^2)/8.9 = 4.45 N, the tension in the cord is 4.45 N.[/tex]
To know more about supports visit:
https://brainly.com/question/27942517
#SPJ11
A guitar string has length of 0.86 m. The sound of the string has a frequency of 655 Hz when it is oscillating with three antinodes. What is the velocity of the travelling wave in the string? Give your answer to 1 decimal place.
The velocity of the traveling wave in the string is approximately 375.6 m/s.
To find the velocity of the traveling wave in the string, we can use the formula:
v = fλ
where:
v is the velocity of the wave,
f is the frequency of the wave, and
λ is the wavelength of the wave.
In this case, we are given the frequency of the wave as 655 Hz and the number of antinodes as three. An antinode is a point of maximum amplitude in a standing wave, and in this case, it corresponds to half a wavelength. Since we have three antinodes, it means we have one and a half wavelengths.
To find the wavelength, we can divide the length of the string by the number of wavelengths:
λ = length / (number of wavelengths)
λ = 0.86 m / (1.5 wavelengths)
λ = 0.5733 m
Now we can substitute the values into the formula to find the velocity:
v = (655 Hz) * (0.5733 m)
v ≈ 375.6 m/s
Therefore, the velocity of the traveling wave in the string is approximately 375.6 m/s.
To learn more about velocity, click here: https://brainly.com/question/30559316
#SPJ11
Consider two beams of light. The first beam
has a wavelength of 280 nm with an
intensity of 3.50 Wm? and the second has a
wavelength of 175 nm with an
intensity of 120 W/m? Each beam strikes an
identical metal surface, causing
electrons to be emitted. Do the following:
• Determine which beam will eject electrons
with more kinetic energy. Defend
your answer!
• Find the energy in el of a photon of this light.
Comparing two beams of light with different wavelengths and intensities, the beam with higher frequency and energy will eject electrons with more kinetic energy. The energy of a photon can be calculated using the equation E = hf.
To determine which beam will eject electrons with more kinetic energy, we can use the concept of photon energy. The energy of a photon is given by the equation:
E = h * f
where E is the energy of the photon, h is Planck's constant (approximately 6.63 x 10^-34 J∙s), and f is the frequency of the light.
To compare the two beams, we need to convert the given wavelengths into frequencies. The frequency (f) can be calculated using the formula:
f = c / λ
where c is the speed of light (approximately 3.00 x 10^8 m/s) and λ is the wavelength.
For the first beam:
λ = 280 nm = 280 x 10^-9 m
f1 = c / λ = (3.00 x 10^8 m/s) / (280 x 10^-9 m)
For the second beam:
λ = 175 nm = 175 x 10^-9 m
f2 = c / λ = (3.00 x 10^8 m/s) / (175 x 10^-9 m)
Now, we can calculate the energies of the photons:
E1 = h * f1
E2 = h * f2
By comparing E1 and E2, we can determine which beam will eject electrons with more kinetic energy.
To find the energy in electron volts (eV) of a photon of this light, we can use the conversion:
1 eV = 1.6 x 10^-19 J
By dividing the energy of the photon (in Joules) by 1.6 x 10^-19, we can find the energy in electron volts.
Please provide the values for the intensities of the beams (3.50 W/m? and 120 W/m?) to complete the calculations and provide a more detailed answer.
To learn more about kinetic energy, click here: https://brainly.com/question/999862
#SPJ11
A sprinter can accelerate with constant acceleration for 4.0 s before reaching top speed. He can run the 100− meter dash in 10.0 s. What is his speed as he crosses the finish line? (Knight Prob. 2.83) (12.5 m/s)
The problem can be solved in two parts as follows:Calculating acceleration, a First, we need to calculate the acceleration of the sprinter.
Given data is: Initial velocity, u = 0 m/s; time taken to accelerate, t = 4.0 s;
Final velocity, v = maximum speed = ?; Distance covered,
s = 100 mUsing the first equation of motion: s = ut + 1/2 at²We get:
100 = 0 + 1/2 a (4.0)² ⇒ a = 6.25 m/s²Calculating maximum speed,
vSecond, we need to calculate the maximum speed of the sprinter. Given data is: Initial velocity,
u = 0 m/s; time taken to accelerate, t = 4.0 s; Final velocity, v = maximum speed = ?;
Distance covered, s = 100 m; Acceleration, a = 6.25 m/s² Using the second equation of motion: v = u + atWe get: v = 0 + 6.25 × 4.0 = 25 m/sTherefore, his speed as he crosses the finish line is 25 m/s.
To know more about acceleration visit:
https://brainly.com/question/12550364
#SPJ11
Consider a particle with mass m moving in a potential U=
2
1
kx
2
, as in a mass-spring system. The total energy of the particle is E=
2m
p
2
+
2
1
kx
2
. Assume that p and x are approximately related by the Heisenberg uncertainty principle, so px≈h. (a) Calculate the minimum possible value of the energy E, and the value of x that gives this minimum E. This lowest possible energy, which is not zero, is called the zero-point energy. (b) For the x calculated in part (a), what is the ratio of the kinetic to the potential energy of the particle?
(a) Calculation of the minimum possible value of energy E and the value of x that gives this minimum E
When a particle with mass m moves in the potential U = 21kx2,
the total energy of the particle is given by
E = 2mp2 + 21kx2px ≈ h
We know that p and x are approximately related by the Heisenberg uncertainty principle.
px ≈ h ⇒ p = h/x
E = 2m(h/x) 2 + 21kx2
Differentiating the above expression with respect to x,
we obtaind
E/dx = (4m/k)(h/x3) + 2kx
= 2k(x + 2m/kh2x-3)
At the minimum possible value of E, dE/dx = 0
2k(x + 2m/kh2x-3) = 0⇒ x = (2m/kh2)1/4
The minimum possible value of E is E = 2m(h/x)2 + 21kx2
= 2h2(2m/kh2) + 21k(2m/kh2)1/2
= h(4m/kh2 + 2m/kh2)1/2
= h(6m/kh2)1/2= (6hm2k)1/2
(b) Calculation of the ratio of the kinetic to the potential energy of the particle For the x calculated in part (a),
the kinetic energy is given by
K = p2/2m
= h2/2mx2k
The potential energy is given byU = 21kx2
The ratio of kinetic to potential energy of the particle is
K/U = h2/2mx2k / 21kx2
= h2/2mx2k×2/2
= h2/4m(2m/kh2)1/2×k(2m/kh2)1/2
= h2/4mk= 1/2
The ratio of kinetic to potential energy of the particle is 1:2.
To know more about Calculation visit :
https://brainly.com/question/30781060
#SPJ11
Some insects can strike their prey very quickly. During one insect's strike, it can accelerate from rest to a speed of 2.3 m/s and cover a distance of 84.0 mm. How long (in seconds) does it take this insect to perform this strike?
It takes 36.52 seconds for the insect to perform its strike.
Given the initial velocity (u) as 0 m/s, the final velocity (v) as 2.3 m/s, and the displacement (s) as 84.0 mm.
Step 1: Convert the displacement from millimeters to meters.
s = 84.0 mm = 84.0 * 10^-3 m
Step 2: Use the equation of motion to find the time (t).
s = (u + v) * t / 2
Rearrange the equation to solve for time:
t = 2s / (u + v)
Substitute the values:
t = 2 * 84.0 * 10^-3 m / (0 + 2.3 m/s)
Step 3: Calculate the time (t).
t = 2 * 84.0 * 10^-3 m / 2.3 m/s
Simplifying the expression:
t = 36.521739130434784 s
Therefore, it takes approximately 36.52 seconds for the insect to perform its strike.
Learn more about strike from the given link
https://brainly.com/question/5171285
#SPJ11
what happens to the total energy in an isolated system
In an isolated system, the total energy remains constant. According to the law of conservation of energy, energy can neither be created nor destroyed; it can only be transferred or transformed from one form to another.
In an isolated system, which is a system that does not exchange energy or matter with its surroundings, the total energy within the system remains constant over time. While energy may be exchanged between different components or forms within the system, the sum of all energy remains unchanged.
For example, in a closed container with no external influences, the total energy of the system, including kinetic energy, potential energy, and any other forms of energy, remains constant. Energy can be converted between different forms within the system, but the total energy content remains conserved.
To learn more about isolated system visit: https://brainly.com/question/2846657
#SPJ11
Any object moving in free space, If its position is r(t) express this position in cylindrical coordinates (R,pi,Z) and find its velocitty and acceleration?
Please solve quickly and correctly for upvote with 3 members only 30 mins left
The velocity and acceleration vectors can be expressed in terms of their cylindrical coordinates [tex](V_R, V_\theta, V_Z)[/tex] and [tex](A_R, A_\theta, A_Z)[/tex] respectively. The object's motion can be described using its position, velocity, and acceleration in the cylindrical coordinate system.
To express the position of an object moving in free space in cylindrical coordinates (R, θ, Z), we need to convert the Cartesian coordinates (x, y, z) to cylindrical coordinates. The conversion equations are as follows:
R = √(x² + y²)
θ = arctan(y / x)
Z = z
Once we have the position r(t) in cylindrical coordinates, we can calculate the velocity and acceleration by taking the time derivative of the position vector.
Velocity: V(t) = dr(t)/dt
Acceleration: A(t) = d²r(t)/dt²
To compute the velocity and acceleration components, we differentiate each coordinate with respect to time (t). For example, if we have R(t), θ(t), and Z(t), we differentiate each of them to obtain their respective velocity and acceleration components.
The velocity and acceleration vectors can be expressed in terms of their cylindrical coordinates [tex](V_R, V_\theta, V_Z)[/tex] and [tex](A_R, A_\theta, A_Z)[/tex] respectively.
In conclusion, to express the position of an object moving in free space in cylindrical coordinates, we convert the Cartesian coordinates to cylindrical coordinates using the conversion equations.
Then, we differentiate the cylindrical coordinates with respect to time to obtain the velocity and acceleration components. This allows us to describe the object's motion in terms of its position, velocity, and acceleration in the cylindrical coordinate system.
To know more about velocity refer here:
https://brainly.com/question/31880406#
#SPJ11
A car that is initially at rest is starting to move with constant acceleration a1 = 5 m/s2 for time Δt1 = 4 s. At the
end of this time, it continues to travel with constant velocity (the one it obtained at the end of the first time
interval) for a time period of Δt2 = 2 s. Finally, it continues to move with a constant, negative, acceleration, until
it stops. The displacement the car traveled at the last portion of its trip is equal to half of the total displacement.
Find the total displacement.
The total displacement of the car is 36 m.
To calculate the total displacement of the car, we need to consider the three different time intervals and their corresponding motions.
First, during the initial time interval Δt1 = 4 s, the car starts from rest and undergoes constant acceleration a1 = 5 m/s². We can use the kinematic equation:
s1 = uΔt + (1/2) a1 (Δt1)²
where s1 is the displacement during this interval, u is the initial velocity (0 m/s in this case), and Δt1 is the time interval.
Substituting the values, we get:
s1 = 0(4) + (1/2)(5)(4)²
= 0 + 40
= 40 m
Next, during the second time interval Δt2 = 2 s, the car travels with constant velocity. Since there is no acceleration, the displacement during this interval, denoted as s2, can be calculated as:
s2 = v2 (Δt2)
where v2 is the velocity at the end of the first time interval. The velocity remains constant, so v2 is equal to the final velocity obtained at the end of the first time interval.
Now, we are given that the displacement during the last portion of the trip is half of the total displacement. Therefore, s2 = (1/2)s_total.
Substituting s2 = (1/2)s_total and v2 = 40 m into the equation, we have:
(1/2)s_total = 40(2)
s_total = 80(2)
s_total = 160 m
However, this value represents the total displacement for the entire trip, which includes the negative displacement during the last portion when the car decelerates until it stops. Since we are told that the displacement during this last portion is half of the total displacement, we can determine the positive displacement during this portion as:
positive displacement = (1/2)s_total = (1/2)(160) = 80 m
Therefore, the total displacement of the car is equal to the sum of the positive and negative displacements:
total displacement = positive displacement + negative displacement
= 80 m + (-80 m)
= 0 m
However, since the car stops at the end of the trip, the total displacement is zero.
Learn more about displacement from the given link:
https://brainly.com/question/11934397
#SPJ11
A 1725.0 kg car with a speed of 68.0 km/h brakes to a stop. How many cal of heat are generated by the brakes as a result? kcal
A 1725.0 kg car with a speed of 68.0 km/h brakes to a stop. The amount of heat generated by the brakes, as a result, is 69.3 kcal. To find the heat energy, we used the initial kinetic energy of the car, which is transformed into heat energy when the car brakes to a stop.
The solution to the given problem is as follows; Given, Mass of the car, m = 1725.0 kg, Speed of the car, v = 68.0 km/h = 18.89 m/s, Initial kinetic energy of the car, Ei = (1/2)mv²The car brakes to a stop, so its final velocity is 0. The kinetic energy of the car is transformed into heat energy, Q = Ei, and Heat energy Q is measured in calories. The conversion factor is 1 cal = 4.186 J. To find Q in kcal, divide the answer by 1000. Q = (1/2)mv² = (1/2)(1725.0 kg)(18.89 m/s)² = 290168.77 JQ = 290168.77 J × 1 cal/4.186 J = 69296.64 cal= 69.3 kcal (rounded to one decimal place)Therefore, the amount of heat generated by the brakes, as a result, is 69.3 kcal.For more questions on kinetic energy
https://brainly.com/question/8101588
#SPJ8
Calculate the rotational inertia of a wheel that has a kinetic
energy of 30.9 kJ when rotating at 877rev / m * in .
Rotational Inertia of a Wheel The rotational inertia of a wheel can be calculated using the formula:
I = (2/5) * M * R^2
where I is the rotational inertia, M is the mass of the wheel, and R is the radius of the wheel.
Given the kinetic energy and rotational speed, we can calculate the mass of the wheel and use the formula above to find the rotational inertia.
Here's how:
Given,
Kinetic energy, K.E = 30.9 kJ
Rotational speed, w = 877 rev/m * in
First, let's convert the rotational speed to radians per second:
877 rev/m * in = (877/60) rev/s = 14.62 rev/s = 14.62 * 2π rad/s = 91.91 rad/s
To find the mass of the wheel, we can use the formula for kinetic energy in rotational motion:
K.E = (1/2) * I * w^2where I is the rotational inertia, and w is the rotational speed.
We can solve for I to get:
I = (2 * K.E) / w^2
Plugging in the given values, we get:
I = (2 * 30.9 kJ) / (91.91 rad/s)^2= 0.225 kg * m^2
Finally, we can use the formula for rotational inertia to find the radius of the wheel: I = (2/5) * M * R^2
We can solve for R to get:
R = √((5 * I) / (2 * M))
Plugging in the known values, we get:
R = √((5 * 0.225 kg * m^2) / (2 * M))= 0.587 m
Therefore, the rotational inertia of the wheel is 0.225 kg * m^2 and the radius of the wheel is 0.587 m.
To know more about rotational inertia visit:
https://brainly.com/question/33258444
#SPJ11
Just after opening a parachute of negligible mass, a parachutist of mass 97.5 kg experiences an instantaneous upward acceleration of 1.05 m/s
2
. Find the force of the air on the parachute. magnitude direction
The force of the air on the parachute is 102.375 N, directed upward.
To calculate the force of the air on the parachute, we can use Newton's second law, which states that force is equal to mass multiplied by acceleration. In this case, the acceleration is the instantaneous upward acceleration experienced by the parachutist.
Given that the mass of the parachutist is 97.5 kg and the upward acceleration is 1.05 m/s², we can calculate the force as follows:
Force = mass × acceleration
Force = 97.5 kg × 1.05 m/s²
Force = 102.375 N
Therefore, the force of the air on the parachute is 102.375 N, directed upward.
Learn more about Force of the air
brainly.com/question/19844472
#SPJ11
n object is rotating about an external axis with a constant tangential velocity of 10m/s. The object is moving further away from the axis at a constant rate of 3m/s. At some initial time the object is noted to be 4m away from the axis. From this point in time, list the six equations of motion for this object. You should have position, velocity and acceleration as well as angular displacement, angular velocity and angular acceleration equations.
For an object rotating about an external axis with a constant tangential velocity and moving further away from the axis at a constant rate, we can derive the following equations of motion:
1. Position (r): r = r₀ + vt,where r₀ is the initial distance from the axis, v is the tangential velocity, and t is time.
2. Velocity (v): v = v₀ + at,where v₀ is the initial tangential velocity, a is the tangential acceleration (which is zero in this case), and t is time.
3. Acceleration (a): a = 0,since the tangential acceleration is zero for constant tangential velocity.
4. Angular Displacement (θ): θ = θ₀ + ω₀t,where θ₀ is the initial angular displacement, ω₀ is the initial angular velocity, and t is time.
5. Angular Velocity (ω): ω = ω₀,since the angular velocity remains constant.
6. Angular Acceleration (α): α = 0,since the angular acceleration is zero for constant angular velocity.
These equations describe the motion of the object in terms of its position, velocity, and acceleration, as well as the angular displacement, angular velocity, and angular acceleration.
To learn more about rotational motion visit brainly.com/question/33356353
#SPJ11.
a delivery man starts at the post office, drives 25km north, then 30km west, then 65km northeast, and finally 60km north to stop for lunch. use a graphical method to find his net displacement vector, and direction in degrees couterclockwise from the east axis.
The direction of the net displacement vector is approximately 40.9 degrees counterclockwise from the east axis.The net displacement vector is the overall displacement of a body after it has moved in a variety of directions, and the direction of the net displacement vector refers to the bearing of the last direction of the body relative to its starting point.
The post office can be considered as the origin, and each segment of the delivery man's path can be represented by a vector.
Here is a graphical method to find the net displacement vector:
Step 1: Draw a coordinate system and use the north and east directions as positive axes. The post office is the origin, which is at the point O.
Step 2: Draw the vector representing the delivery man's first leg, which is 25 km long and goes north. This vector is represented by the arrow OA.
Step 3: Draw the vector representing the delivery man's second leg, which is 30 km long and goes west. This vector is represented by the arrow AB. The tail of this vector is at point A, which is the endpoint of the first vector.
Step 4: Draw the vector representing the delivery man's third leg, which is 65 km long and goes northeast. This vector is represented by the arrow BC. The tail of this vector is at point B, which is the endpoint of the second vector.
Step 5: Draw the vector representing the delivery man's fourth leg, which is 60 km long and goes north. This vector is represented by the arrow CD. The tail of this vector is at point C, which is the endpoint of the third vector.
Step 6: Draw the vector from the origin to the endpoint of the last vector, which is the net displacement vector. This vector is represented by the arrow OE.
Step 7: Measure the length of the net displacement vector. The length is approximately 92 km.
Step 8: Measure the angle between the net displacement vector and the positive x-axis (east axis). The angle is approximately 40.9 degrees counterclockwise from the east axis.
Therefore, the direction of the net displacement vector is approximately 40.9 degrees counterclockwise from the east axis. Answer: 40.9 degrees counterclockwise from the east axis.
Learn more about displacement here ;
https://brainly.com/question/11934397
#SPJ11
1 Water from a fire hose is directed toward a building as shown in the figure beiow The water leaves the hoso at a speed of v
i
=40.0 mis and at an angle of θ
j
=480
∘
above the horizortal. The base of the hose (at ground ievei) is a hocizontal distance d=490 m away from the bulding. Find the height h (in m) where the water strkes the building () the fime? Koomral the time, Iatial velosity, and acceieration, wiat is the verical dispacerfent? m
Given Data Speed of the water (v)=40 m/s Angle of inclination (θ)=48°Distance of the hose from the building (d)=490 m To find:
Height where the water strikes the building (h)Time when the water strikes the building (t)Vertical displacement of the water when it strikes the buildingFormula Used:Time of flight (t)=2usin(θ)/gwhere u=initial velocity of the projectile in the vertical direction (u=usin(θ))h=vertical displacement of the projectileu=initial velocity of the projectile in the vertical direction (u=usin(θ))v=u/cos(θ)Vertical displacement, h=u²sin²(θ)/2gLet the height where the water strikes the building be h and the time when the water strikes the building be t.So, the horizontal displacement of the water from the point of projection is d=490 m.At the highest point, the vertical component of the velocity of water is zero.So, v=usin(θ)u=v/sin(θ)=40/cos(48) m/s≈55.74 m/sUsing the above value of u and the value of θ, we can calculate the vertical displacement, h of the water when it strikes the building as below:
h=u²sin²(θ)/2g=(55.74)²(sin48°)²/(2×9.8)≈311.5 mTherefore, the height where the water strikes the building is approximately 311.5 m.The time taken by the water to hit the building can be calculated as:t=2usin(θ)/g=2(55.74)(sin48°)/9.8≈12.5 s.Therefore, the time when the water strikes the building is approximately 12.5 s.The vertical displacement of the water when it strikes the building can be calculated as below:
Vertical displacement of water=h=311.5 mTherefore, the vertical displacement of the water when it strikes the building is approximately 311.5 m.About WaterWater is a compound that is essential for all life forms known hitherto on Earth, but not on other planets. Its chemical formula is H₂O, each molecule containing one oxygen and two hydrogen atoms connected by covalent bonds. Water covers almost 71% of the Earth's surface.
Learn More About Water at https://brainly.com/question/1313076
#SPJ11
what is the index of refraction of the second medium if a ray that makes an angle 45.0o in flint glass (n=1.65) makes an angle of 41.3o in the new medium
The index of refraction of the second medium is approximately 1.77.
Snell's law states that the ratio of the sine of the angle of incidence to the sine of the angle of refraction is equal to the ratio of the indices of refraction of the two media. Mathematically, it can be expressed as n₁sinθ₁ = n₂sinθ₂, where n₁ and n₂ are the indices of refraction of the first and second media, respectively, and θ₁ and θ₂ are the angles of incidence and refraction, respectively.
In this case, the angle of incidence in flint glass is 45.0 degrees, and the angle of refraction in the new medium is 41.3 degrees. The index of refraction of flint glass is given as 1.65. We can rearrange Snell's law to solve for n₂: n₂ = n₁sinθ₁/sinθ₂.
Substituting the given values, we have n₂ = (1.65)(sin45.0°)/sin41.3°.
Calculating this expression, we find n₂ ≈ 1.77.
Therefore, the index of refraction of the second medium is approximately 1.77.
Learn more about refraction here:
https://brainly.com/question/14760207
#SPJ11
A thin metallic spherical shell of radius 40.6 cm has a total charge of 9.45 μC uniformly distributed on it. At the center of the shell is placed a point charge of 1.43. What is the magnitude of the electric field at a distance of 13.4 cm from the center of the spherical shell?
The magnitude of the electric field at a distance of 13.4 cm from the center of the spherical shell is approximately 115,831 N/C.
To calculate the magnitude of the electric field at a distance of 13.4 cm from the center of the spherical shell, we can use the principle of superposition. The electric field at that point is the sum of the electric fields created by the charged spherical shell and the point charge.
The electric field created by the uniformly charged spherical shell at a point outside the shell is zero. This is because the electric field due to the shell's charge cancels out in all directions.
Therefore, we only need to consider the electric field created by the point charge at the center of the shell. The magnitude of the electric field due to a point charge at a distance r from the charge is given by the formula:
[tex]E = k * (|Q| / r^2),[/tex]
where k is the electrostatic constant ([tex]8.99 × 10^9 N m^2/C^2[/tex]), |Q| is the magnitude of the charge, and r is the distance from the charge.
Substituting the values into the formula, we have:
[tex]E = (8.99 × 10^9 N m^2/C^2) * (1.43 μC / (0.134 m)^2).[/tex]
To know more about electric field refer to-
https://brainly.com/question/11482745
#SPJ11
A potential difference of 24 V is found to produce a current of 0.50 A in a 5.4-m length of wire with a uniform radius of 0.350 cm. What is (a) the resistance of the wire and (b) the resistivity
(a) The resistance of the wire is approximately 48 Ω.
(b) The resistivity of the material is approximately 1.30 x 10^(-6) Ω·m.
(a) The resistance of a wire can be calculated using Ohm's Law, which states that resistance (R) is equal to the ratio of potential difference (V) to current (I): R = V / I. Substituting the given values, we have R = 24 V / 0.50 A = 48 Ω.
(b) The resistance of a wire can also be expressed in terms of its dimensions and the resistivity (ρ) of the material it is made of. The formula for resistance is R = (ρL) / A, where L is the length of the wire, A is the cross-sectional area, and ρ is the resistivity. Rearranging the equation, we can solve for the resistivity: ρ = (RA) / L.
The cross-sectional area of the wire can be calculated using the formula A = πr^2, where r is the radius. Substituting the given radius (0.350 cm or 0.00350 m), we find A = π×[tex](0.00350 m)^{2}[/tex].
Using the calculated resistance (48 Ω), length (5.4 m), and cross-sectional area, we can calculate the resistivity: ρ = (48 Ω * π ×[tex](0.00350 m)^{2}[/tex] / 5.4 m.
Evaluating the expression gives ρ ≈ 1.30 x [tex]10^{-6}[/tex] Ω·m.
Therefore, the resistance of the wire is approximately 48 Ω, and the resistivity of the material is approximately 1.30 x [tex]10^{-6}[/tex] Ω·m.
Learn more about resistance here:
https://brainly.com/question/29427458
#SPJ11
What is the intensity (in W/m2) of an electromagnetic wave with
a peak electric field strength of 220 V/m?
____ W/m2
The intensity of the electromagnetic wave with a peak electric field strength of 220 V/m is approximately 1.2306 x 10^(-5) W/m².
The intensity (I) of an electromagnetic wave can be calculated using the formula:
I = (c * ε₀ / 2) * E₀²
Where:
I is the intensity of the wave in watts per square meter (W/m²)
c is the speed of light in a vacuum (approximately 3 x 10^8 m/s)
ε₀ is the vacuum permittivity (approximately 8.85 x 10^-12 F/m)
E₀ is the peak electric field strength in volts per meter (V/m)
Plugging in the values:
E₀ = 220 V/m
I = (3 x 10^8 m/s * 8.85 x 10^-12 F/m / 2) * (220 V/m)²
Simplifying the equation:
I = 1.2306 x 10^(-5) W/m²
Therefore, the intensity of the electromagnetic wave with a peak electric field strength of 220 V/m is approximately 1.2306 x 10^(-5) W/m².
To know more about intensity, refer here:
https://brainly.com/question/29526985#
#SPJ11