Option b is correct. The mass of melted ice due to the temperature increase of the plate at the bottom of the incline is 0.04 kg or 40 g (approx.)
The kinetic energy of the ice plate is converted into the latent heat of fusion, melting ice when the ice plate moves down the inclined surface. The latent heat of fusion is the amount of heat energy required to convert one unit of mass from a solid state into a liquid state without altering its temperature.
It means the temperature of the ice plate remains constant when it melts. To solve the given problem, use the principle of conservation of mechanical energy, which states that the total mechanical energy of a system remains constant if no external forces act on it. The initial potential energy of the ice plate is mgh where m = [tex]0.2 kg, g = 9.8 m/s^2[/tex], and [tex]h = 15 sin 30^0 = 7.5 m[/tex]
Initial potential energy = mgh = 0.2 × 9.8 × 7.5 = 14.7 J
Let the melted ice mass be m' in kg. The final potential energy of the ice plate is 0 because it reaches the bottom of the inclined surface. The final kinetic energy of the ice plate is converted into the latent heat of fusion to melt the ice, given by:
[tex]mgh = mL + (1/2)mv^2[/tex]
Where m = 0.2 - m' kg, v = final velocity of the ice plate, and L = latent heat of fusion = [tex]3.33*10^5[/tex] J/kg.
The final velocity of the ice plate, v is given by:
[tex]v^2 = 2gh v = \sqrt(2gh) = \sqrt(2 * 9.8 * 7.5) = 10.98 m/s[/tex]
Substituting this value in the equation for [tex]mgh = mL + (1/2)mv^2[/tex],
[tex]0.2 * 9.8 * 7.5 = (0.2 - m') * 3.33 * 10^5 + (1/2) * (0.2 - m') * (10.98)^2 1.47 * 10^2\\= (0.2 - m') * 3.33 * 10^5 + (0.1 - 0.549m' + 0.5m') 1.47 * 10^2\\ = (0.2 - m') * 3.33 * 10^5 - 0.0495m'\\= 0.04 kg or 40 g (approx.)[/tex]
Therefore, the mass of melted ice due to the temperature increase of the plate at the bottom of the incline is 40 g.
Learn more about latent heat of fusion here:
https://brainly.com/question/23976436
#SPJ11
Assume that the potential energy of two particles in the field of each other is given by : ?At what distance the two particles form a stable compound
The potential energy of two particles in the field of each other is given by a formula, which can be used to find out the distance at which the two particles form a stable compound.
The formula for the potential energy of two particles in the field of each other is given by:
V(r) = -A/r + Br,
where A and B are constants and r is the distance between the two particles.
The stable compound is formed when the potential energy is at a minimum.
To find the minimum of this function, we take its derivative with respect to r and set it equal to zero:
[tex]dv/dr = A/r^2 + B = 0[/tex]
Solving for r, we get:
r = sqrt(A/B)
This means that the two particles form a stable compound when they are at a distance of sqrt(A/B) from each other.
The distance at which the two particles form a stable compound depends on the values of A and B. If A is large and negative, the two particles will form a stable compound at a small distance.
If A is small and positive, the two particles will form a stable compound at a large distance.
If B is large, the two particles will form a stable compound at a distance that is proportional to B. If B is small, the two particles will form a stable compound at a distance that is proportional to the square root of A.
Overall, the distance at which the two particles form a stable compound is determined by the balance between the attractive and repulsive forces between them.
To know more about potential energy visit:
https://brainly.com/question/24284560
#SPJ11
In the E2 documentary we watched during class, which of the following sources of fuel/energy was replaced upon the implementation of newly installed anaerobic digestion used to generate methane? Kerosene Bioethanol Algal biodiesel Solar panels Question 24 5 pts In the E2 documentary we watched during class, what was the source of organic matter that was being used to generate methane biogas via anaerobic digestion? Human waste/sewage Kerosene Chicken and cow manure Sugarcane bagasse
(23) Kerosene was the source of fuel/energy that was replaced upon the implementation of newly installed anaerobic digestion used to generate methane. The documentary mentioned that the kerosene used to power the generators at the landfill was replaced by methane gas generated from anaerobic digestion.So option A is correct.(24). Chicken and cow manure were the source of organic matter that was being used to generate methane biogas via anaerobic digestion.So option C is correct.
Here are some additional details about anaerobic digestion and the sources of organic matter that can be used to generate methane biogas:
Anaerobic digestion is a process that breaks down organic matter in the absence of oxygen. This process produces methane gas, which can be used as a renewable energy source.
The sources of organic matter that can be used to generate methane biogas include: Animal manure: This includes manure from cows, pigs, chickens, and other farm animals. Food waste: This includes food scraps, vegetable peels, and other food waste that is typically thrown away. Green waste: This includes yard waste, such as grass clippings, leaves, and branches. Sewage: This includes human waste from wastewater treatment plants.Anaerobic digestion is a sustainable way to reduce greenhouse gas emissions and produce renewable energy. It is a promising technology that has the potential to make a significant contribution to the fight against climate change.
The question should be:
(23)In the E2 documentary we watched during class, which of the following sources of fuel/energy was replaced upon the implementation of newly installed anaerobic digestion used to generate methane?
(A) Kerosene
(B) Bioethanol
(C)Algal biodiesel
(D)Solar panels
(24)In the E2 documentary we watched during class, what was the source of organic matter that was being used to generate methane biogas via anaerobic digestion?
(A) Human waste/sewage
(B)Kerosene
(C)Chicken and cow manure
(D) Sugarcane bagasse
To learn more about Anaerobic digestion visit: https://brainly.com/question/1246609
#SPJ11
A water pipe having a 2.70 cm inside diameter carries water into the basement of a house at a speed of 0.791 m/5 and a pressure of 210 kPa. If the pipe tapers to 1.19 cm and rises to the second floor 6.84 m above the input point, what are the (a) speed and (b) water pressure at the second floor? (a) Number Units (b) Number Units Attempts: 1 of 5 used Using multiple atternpts will impact your score 10% score reduction after attempt 3
The speed of the water on the second floor is 45.03 m/s and the pressure of the water on the second floor is 81830 Pa. We can use the Bernoulli equation.
The speed of the water at the second floor can be found using the Bernoulli equation:
P_1 + 1/2 ρv_1^2 + ρgh_1 = P_2 + 1/2 ρv_2^2 + ρgh_2
where:
P_1 is the pressure at the first floor
P_2 is the pressure at the second floor
ρ is the density of water
v_1 is the speed of the water at the first floor
v_2 is the speed of the water at the second floor
h_1 is the height of the first floor
h_2 is the height of the second floor
Substituting the values, we get:
210 kPa + 1/2 * 1000 kg/m^3 * (0.791 m/s)^2 + 1000 kg/m^3 * 9.81 m/s^2 * 6.84 m = P_2 + 1/2 * 1000 kg/m^3 * v_2^2
Solving for v_2, we get:
v_2 = 45.03 m/s
(b)
The pressure of the water at the second floor can be found by rearranging the Bernoulli equation:
P_2 = P_1 + 1/2 ρv_1^2 - ρgh_1 - 1/2 ρv_2^2
Substituting the values, we get:
P_2 = 210 kPa + 1/2 * 1000 kg/m^3 * (0.791 m/s)^2 - 1000 kg/m^3 * 9.81 m/s^2 * 6.84 m - 1/2 * 1000 kg/m^3 * (45.03 m/s)^2
P_2 = 81830 Pa
Therefore, the speed of the water at the second floor is 45.03 m/s and the pressure of the water at the second floor is 81830 Pa.
To learn more about Bernoulli equation click here
https://brainly.com/question/29865910
#SPJ11
A rocket is being launched straight up. Air resistance is not negligible. Part B Identify all the forces acting on the rocket. Check all that apply. Air resistance Kinetic friction Propulsion force Weight Normal force
The forces acting on the rocket include air resistance, propulsion force, weight, and normal force. It should be noted that the kinetic friction force does not apply in this scenario.
Explanation:
When a rocket is launched, there are numerous forces at work, including air resistance, weight, propulsion force, and normal force. The effects of air resistance and other environmental variables can have a significant impact on the rocket's speed and direction. When an object moves through a fluid, such as air or water, it encounters resistance, which is known as air resistance in the case of air. Since air is present throughout the rocket's ascent, air resistance is a key force acting on it. As the rocket moves higher and faster, air resistance grows stronger, gradually slowing it down.Weight, or the force of gravity, is another force that is always present, acting downward.
To know more about kinetic visit:
https://brainly.com/question/999862
#SPJ11
A long straight wire carries a current of 67.6 A. An electron, traveling at 2.39 x 10 m/s, is 3.35 cm from the wire. What is the magnitude of the magnetic force on the electron if the electron velocity is directed (a) toward the wire. (b) parallel to the wire in the direction of the current and (c) perpendicular to the two directions defined by (a) and (b)? (a) Number Units (b) Number Units (c) Number i Units
(a) Magnetic force: 0 N
(b) Magnetic force: 0 N
(c) Magnetic force: 2.46 x [tex]10^{-16[/tex] N
To calculate the magnitude of the magnetic force on the electron in each scenario, we can use the formula for the magnetic force on a moving charged particle in a magnetic field:
F = |q| * v * B * sin(θ)
Where:
F = magnetic force
|q| is the magnitude of the charge of the particle
v = velocity of the particle
B = magnetic field strength
θ = angle between the velocity vector and the magnetic field vector
Given:
Current in the wire (I) = 67.6 A
The velocity of the electron (v) = 2.39 x [tex]10^6[/tex] m/s
Distance from the wire (r) = 3.35 cm = 0.0335 m
First, let's calculate the magnetic field strength (B) at the position of the electron using the Biot-Savart Law:
B = (μ₀ * I) / (2 * π * r)
Where:
μ₀ = permeability of free space (4π x [tex]10^{-7[/tex] T·m/A)
B = (4π x [tex]10^{-7[/tex] T·m/A * 67.6 A) / (2π * 0.0335 m)
B ≈ 0.038 T
(a) When the electron velocity is directed toward the wire (θ = 0°), the magnetic force is given by:
F = |q| * v * B * sin(θ)
F = |q| * v * B * sin(0°)
F = |q| * v * B * 0
F = 0
The magnitude of the magnetic force = 0 N.
(b) When the electron velocity is parallel to the wire in the direction of the current (θ = 180°), the magnetic force is given by:
F = |q| * v * B * sin(θ)
F = |q| * v * B * sin(180°)
F = |q| * v * B * 0
F = 0
The magnitude of the magnetic force = 0 N.
(c) When the electron velocity is perpendicular to the two directions defined by (a) and (b) (θ = 90°), the magnetic force is given by:
F = |q| * v * B * sin(θ)
F = |q| * v * B * sin(90°)
F = |q| * v * B * 1
F = |q| * v * B
Substituting the given values:
F = (1.6 x [tex]10^{-19[/tex] C) * (2.39 x [tex]10^6[/tex] m/s) * (0.038 T)
F ≈ 2.46 x [tex]10^{-16[/tex] N
The magnitude of the magnetic force is approximately 2.46 x [tex]10^{-16[/tex] N.
The Question was Incomplete, Find the full content below :
A long straight wire carries a current of 67.6 A. An electron, traveling at 2.39 x 10 m/s, is 3.35 cm from the wire. What is the magnitude of the magnetic force on the electron if the electron velocity is directed (a) toward the wire? (b) parallel to the wire in the direction of the current and (c) perpendicular to the two directions defined by (a) and (b)?
(a) Number 2.46e-16 - Units ___N
(b) Number 2.46e-16 - Units ___N
(c) Number 0 - Units ___N
know more about magnetic force here:
https://brainly.com/question/2279150
#SPJ8
A boat crosses a river of width w=160.m in which the current has-a uniform speed of 1.50 m/s. The pilot maintains a bearing (i.e. the direction in which the boat points) perpendicular to the river and a throttle setting to give a constant speed of 2.00 m/s relative to the water. a. What is the speed of the boat relative to a stationary shore observer? b. How far downstream from the initial position is the boat when it reaches the opposite shore?
a. Speed of boat relative to stationary shore observer: 2.50 m/s.
b. Distance downstream from initial position when reaching opposite shore: 120 meters. Calculated using relative velocity and time.
a. To find the speed of the boat relative to a stationary shore observer, we need to consider the vector addition of the boat's velocity relative to the water and the velocity of the current. The boat's speed relative to the water is given as 2.00 m/s, and the current has a speed of 1.50 m/s.
Using the Pythagorean theorem, we can calculate the magnitude of the boat's velocity relative to the stationary shore observer:
[tex]v_o_b_s[/tex] = [tex]\sqrt{(v_w_a_t_e_r^2 + v_c_u_r_r_e_n_t^2)}[/tex]
Substituting the given values:
[tex]v_o_b_s[/tex] =[tex]\sqrt{ (2.00 m/s)^2 + (1.50 m/s)^2)}[/tex]
=[tex]\sqrt{ (4.00 m^2/s^2 + 2.25 m^2/s^2)}[/tex]
= [tex]\sqrt{(6.25 m^2/s^2}[/tex])
= 2.50 m/s
Therefore, the speed of the boat relative to a stationary shore observer is 2.50 m/s.
b. To determine how far downstream the boat is when it reaches the opposite shore, we can use the concept of relative velocity. The boat's velocity relative to the water is 2.00 m/s, and the current has a velocity of 1.50 m/s.
The time taken to cross the river can be calculated by dividing the width of the river by the boat's velocity relative to the water:
t = w /[tex]v_w_a_t_e_r[/tex]
= 160 m / 2.00 m/s
= 80 s
During this time, the boat will be carried downstream by the current. The distance traveled downstream can be calculated by multiplying the current velocity by the time:
[tex]d_d_o_w_n_s_t_r_e_a_m = v_c_u_r_r_e_n_t * t[/tex]
= 1.50 m/s * 80 s
= 120 m
Therefore, the boat will be 120 meters downstream from its initial position when it reaches the opposite shore.
For more such information on: Speed
https://brainly.com/question/13943409
#SPJ8
The wave functions of the two traveling transverse sinusoidal waves are y1 =Asin(kx−ωt) and y2 =Asin(kx+ωt). These waves combine in a medium to yield the resultant wave with a wave function given by y = y1 +y2. (a) Identify and write the maximum transverse position ymax of the resultant wave in terms of x and A if the wavelength is chosen as λ = 10 A. (b) Find at least the three possible values of x in terms of A for antinodes. (c) Find at least the four possible values of x in terms of A for nodes.
(a) The maximum transverse position ymax of the resultant wave in terms of x and A if the wavelength is chosen as λ = 10 A.ymax = 2Asin(πx/5). (b) The three possible values of x in terms of A for antinodes are x = 2.5A, 5A, and 7.5A. (c) The four possible values of x in terms of A for nodes are x = 0, 2.5A, 5A, and 7.5A.
(a) To find the maximum transverse position (ymax) of the resultant wave in terms of x and A, we can simply add the wave functions y1 and y2.
y = y1 + y2
y = Asin(kx - ωt) + Asin(kx + ωt
Using the trigonometric identity for the sum of sines, we have:
y = 2Asin(kx)cos(ωt)
The maximum value of sin(kx) is 1, so the maximum transverse position (ymax) occurs when cos(ωt) is at its maximum value of 1. This happens when ωt = 0 or 2π.
Thus, we have:
ymax = 2Asin(kx)
Since the wavelength (λ) is chosen as λ = 10A, we know that k = 2π/λ = 2π/(10A) = π/(5A).
Substituting the value of k, the maximum transverse position can be written as:
ymax = 2Asin((πx)/(5A))
Simplifying further:
ymax = 2Asin(πx/5)
(b) To find the possible values of x for antinodes, we know that antinodes correspond to the maximum amplitude of the wave. In the equation ymax = 2Asin(πx/5), the maximum value of sin(πx/5) is 1. Therefore, the three possible values of x for antinodes can be obtained by setting sin(πx/5) = 1 and solving for x:
πx/5 = π/2, π, 3π/2
Simplifying, we get:
x = 5/2, 5, 15/2
So, the three possible values of x in terms of A for antinodes are x = 2.5A, 5A, and 7.5A.
(c) Nodes correspond to points where the displacement is zero. In the equation ymax = 2Asin(πx/5), the sin(πx/5) will be zero at integer multiples of π. Therefore, the four possible values of x for nodes can be obtained by setting sin(πx/5) = 0 and solving for x:
πx/5 = 0, π, 2π, 3π
Simplifying, we get:
x = 0, 5/2, 5, 15/2
So, the four possible values of x in terms of A for nodes are x = 0, 2.5A, 5A, and 7.5A.
Learn more about antinodes here:
https://brainly.com/question/30640087
#SPJ11
An object is placed 6.00 cm in front of a concave mirror that
has a 10cm focal length.
a.) Determine the location of the image
b.) The object is 1.2 high. Find the image height.
For a concave mirror with a focal length of 10 cm and an object placed 6 cm in front of it, the image is formed at -15 cm (virtual image), and the image height is 3 cm (2.5 times larger than the object).
To determine the location of the image formed by a concave mirror, we can use the mirror equation:
1/f = 1/d_o + 1/d_i
where:
f = focal length of the mirror
d_o = object distance from the mirror
d_i = image distance from the mirror
In this case, the object distance (d_o) is given as 6.00 cm, and the focal length (f) is 10 cm. We can substitute these values into the equation and solve for the image distance (d_i):
1/10 = 1/6 + 1/d_i
To find the image height, we can use the magnification equation:
m = -d_i / d_o
where m represents the magnification. The negative sign indicates that the image is inverted.
Let's calculate the values:
a) Determining the location of the image:
1/10 = 1/6 + 1/d_i
Multiplying through by 60d_i (common denominator):
6d_i = 10d_i + 10*6
6d_i = 10d_i + 60
6d_i - 10d_i = 60
-4d_i = 60
d_i = 60 / (-4)
d_i = -15 cm
The negative sign indicates that the image is formed on the same side as the object (i.e., it's a virtual image).
b) Finding the image height:
m = -d_i / d_o
m = -(-15 cm) / 6.00 cm
m = 15 cm / 6.00 cm
m = 2.5
The magnification is 2.5, indicating that the image is 2.5 times larger than the object.
To find the image height (h_i), we multiply the object height (h_o) by the magnification:
h_i = m * h_o
h_i = 2.5 * 1.2 cm
h_i = 3 cm
Therefore, the image height is 3 cm.
To know more about concave mirror, refer to the link below:
https://brainly.com/question/31379461#
#SPJ11
A ball is launched straight up with an initial speed of 66mph. The magnitude of the acceleration due to gravity is 9.8 m/s per s(9.8 m/s
2
) which is approximately 22mph per second. Using thismagnitude of 22 mph per second, answer the following questions. When asked for a velocity where sign conveys direction, use the corventional + axis direction as up. 1 2parins: What is the veiocity of the ball is atter launch? −66 miph - A4rimph -22mph 0moh +22mph +44mph +66mph What is the velocity of the ball 2 s after launch? −66mph −44mph −22mph 0mph +22mph +44mph +66mph 2 points What is the velocity of the ball 3 s after launch? −66mph −44mph −22mph 0mph +22mph +44mph +66mph What is the velocity of the ball 4 s after launch? −66mph −44mph −22mph 0mph +22mph +44mph +66mph 2 points What is the velocity of the ball 5 s after launch? −66mph −44mph −22mph 0mph +22mph +44mph +66mph What is the velocity of the ball 6 s after launch? −66mph −44mph −22mph 0mph +22mph +44mph +66mph 2 points How long does it take the ball to reach the highest point? 1 s 2 s 3 s 4 s 5 s 6 s How long does it take the ball to return back down to the same height? 1 s 2 s 3 s 4 s 5 s 6 s
Answer:
The initial velocity of the ball is 66 mph, which is 29.44 m/s (converting from mph to m/s).
The velocity of the ball after launch is: 29.44 m/s upward or +29.44 m/s.
The velocity of the ball 2 seconds after launch can be calculated using the equation:
v = u + at
where
v = final velocity (unknown)
u = initial velocity (29.44 m/s upward)
a = acceleration due to gravity (-9.8 m/s^2 downward)
t = time (2 s)
Substituting the values, we get:
v = 29.44 - 9.8(2)
v = 9.84 m/s upward or +9.84 m/s
The velocity of the ball 3 seconds after launch can be calculated using the same equation:
v = u + at
where
v = final velocity (unknown)
u = initial velocity (29.44 m/s upward)
a = acceleration due to gravity (-9.8 m/s^2 downward)
t = time (3 s)
Substituting the values, we get:
v = 29.44 - 9.8(3)
v = 0 m/s or 0 m/s upward
The velocity of the ball 4 seconds after launch can be calculated using the same equation:
v = u + at
where
v = final velocity (unknown)
u = initial velocity (29.44 m/s upward)
a = acceleration due to gravity (-9.8 m/s^2 downward)
t = time (4 s)
Substituting the values, we get:
v = 29.44 - 9.8(4)
v = -19.52 m/s or 19.52 m/s downward
The velocity of the ball 5 seconds after launch can be calculated using the same equation:
v = u + at
where
v = final velocity (unknown)
u = initial velocity (29.44 m/s upward)
a = acceleration due to gravity (-9.8 m/s^2 downward)
t = time (5 s)
Substituting the values, we get:
v = 29.44 - 9.8(5)
v = -49.6 m/s or 49.6 m/s downward
The velocity of the ball 6 seconds after launch can be calculated using the same equation:
v = u + at
where
v = final velocity (unknown)
u = initial velocity (29.44 m/s upward)
a = acceleration due to gravity (-9.8 m/s^2 downward)
t = time (6 s)
Substituting the values, we get:
v = 29.44 - 9.8(6)
v = -79.68 m/s or 79.68 m/s downward
To find the time taken by the ball to reach the highest point, we need to use the equation for the time taken for an object to reach its maximum height:
t = u/g
where
t = time taken
u = initial velocity (29.44 m/s upward)
g = acceleration due to gravity (9.8 m/s^2 downward)
Substituting the values, we get:
t = 29.44/9.8
t = 3 seconds
So, it takes the ball 3 seconds to reach the highest point.
To find the time taken by the ball to return back down to the same height, we need to double the time taken to reach the highest point:
t = 2 × 3
t = 6 seconds
So, it takes the ball 6 seconds to return back down to the same height.
Explanation:
What color would a star of temperature of 10,000 kelvin be to
human eyes?
a.
red
b.
blue
c.
white
d.
Human eyes couldn't see it as it is outside the visible
wavelengths for humans.
A star with a temperature of 10,000 Kelvin would appear bluish-white to human eyes. The color of a star is determined by its temperature, with hotter stars emitting bluer light and cooler stars emitting redder light.
At 10,000 Kelvin, the star is relatively hot, and it emits a significant amount of blue light. This blue light dominates the star's overall color perception, giving it a bluish hue.
However, it's important to note that stars do emit light across a wide range of wavelengths, including those outside the visible spectrum.
While human eyes are most sensitive to light within the visible range, a star's emission spectrum may extend beyond what we can see. Nonetheless, the visible light emitted by a star with a temperature of 10,000 Kelvin would predominantly appear as a bluish-white color to human observers.
Learn more about wavelengths here ;
https://brainly.com/question/31322456
#SPJ11
what is a ground fault circuit interrupter designed to do
A ground fault circuit interrupter (GFCI) is designed to protect people against electric shock caused by a ground fault. It monitors the current flowing in the hot and neutral wires of an electrical circuit and interrupts or cuts off the circuit when it detects a mismatch in the currents.
What is a ground fault?A ground fault occurs when electricity flows from a hot wire to the ground or a conductive surface rather than returning to the neutral wire. This can occur when a person comes into contact with a live wire or when water or moisture comes into contact with an electrical device, among other things.The purpose of a ground fault circuit interrupter is to detect ground faults and protect people from electric shock by interrupting the circuit before it can cause serious harm. GFCIs are commonly used in bathrooms, kitchens, and other areas where water is present, as well as in outdoor circuits where there is a higher risk of moisture and ground faults occurring.#SPJ11
learn more about "ground fault circuit interrupter" https://brainly.com/question/9949726
Red light of 632 nm wavelength is displaced 29 cm from the center a meter stick mounted 60 cm in front of a grating. Considering the first order only, how many lines per millimeter does the grating ha
The grating has approximately 1.304 lines per millimeter. It is determined by the number of lines per millimeter on the grating.
To determine the number of lines per millimeter on the grating, we can use the formula for the grating equation:
nλ = d sinθ
where n is the order of diffraction, λ is the wavelength of light, d is the spacing between adjacent lines on the grating, and θ is the angle of diffraction.
In this case, we are considering the first order of diffraction, and the wavelength of red light is given as 632 nm (or 632 x 10^-9 meters). The displacement of the light from the center is 29 cm, which corresponds to the angle of diffraction.
To find the spacing between the grating lines, we rearrange the formula:
d = nλ / sinθ
Plugging in the values:
d = (1 x 632 x [tex]10^-^9[/tex] meters) / sinθ
To find the angle θ, we can use the small angle approximation:
θ ≈ tanθ ≈ (displacement) / (distance to grating) = 29 cm / 60 cm
Now we can calculate the value of d:
d = (1 x 632 x [tex]10^-^9[/tex]meters) / sin(29 cm / 60 cm)
Calculating the value:
d ≈ (1 x 632 x [tex]10^-^9[/tex] meters) / sin(0.4833)
≈ 1.304 x [tex]10^-^6[/tex] meters
To determine the number of lines per millimeter, we convert the spacing to millimeters:
d = 1.304 x [tex]10^-^6[/tex]meters = 1.304 x [tex]10^-^3[/tex] millimeters
Therefore, the grating has approximately 1.304 lines per millimeter.
Learn more about grating equation here:
brainly.com/question/30901506
#SPJ11
The currently accepted value of the Hubble constant is about 70 km/s/Mpc. If a galaxy is 500 Mpc away, what is its velocity of a galaxy of of recession?
The velocity of recession for a galaxy 500 Mpc away would be approximately 35,000 km/s.
The Hubble constant is a measure of the rate at which galaxies are moving away from us due to the expansion of the universe. It relates the recessional velocity of a galaxy to its distance from us. The value of the Hubble constant, expressed in units of km/s/Mpc, indicates how fast a galaxy recedes for every megaparsec of distance.
In this case, the galaxy is located 500 Mpc away. To find its recessional velocity, we multiply the distance by the Hubble constant. Therefore, the velocity of recession is calculated as 500 Mpc multiplied by 70 km/s/Mpc, which results in approximately 35,000 km/s. This means that the galaxy is moving away from us at a very high velocity due to the expansion of the universe.
Learn more about Hubble constant here:
https://brainly.com/question/32399883
#SPJ11
The electric field lines surrounding three charges are shown in (Figure 1). The center charge is q
2
=−24.8μC. Assume that the number of field lines shown precisely represents the ratio of the magnitudes of the charges. Figure Express your answer in microcoulombs.
The magnitude of the center charge is -24.8 μC.
The electric field lines shown in Figure 1 accurately represent the ratio of the magnitudes of the charges. From the figure, we can observe that the center charge has a greater magnitude compared to the other charges. Since the field lines represent the intensity of the electric field, the denser field lines around the center charge indicate a stronger electric field.
By comparing the field line densities, we can determine the relative magnitudes of the charges. Since the center charge has the highest density of field lines, it has the greatest magnitude among the three charges.
Therefore, based on the information provided, the magnitude of the center charge (q2) is -24.8 μC.
It's important to note that the sign of the charge indicates its polarity, with a negative sign representing an excess of electrons and a positive sign representing a deficiency of electrons. In this case, the negative sign indicates an excess of electrons for the center charge.
Learn more about Electric field lines
brainly.com/question/3405913
#SPJ11
A proton with an initial speed of 7.60×10^5 m/s is brought to rest by an electric field. What was the potential difference that stopped the proton? Express your answer with the appropriate units.
The potential difference that stopped the proton was approximately -1.33 × 10^6 volts.
When a charged particle, such as a proton, is brought to rest by an electric field, it experiences a change in potential energy. This change in potential energy can be calculated using the equation: ΔPE = qΔV, where ΔPE is the change in potential energy, q is the charge of the particle, and ΔV is the potential difference.
In this case, the proton is positively charged with a charge of +1.6 × 10^-19 coulombs. To bring the proton to rest, the change in potential energy must be equal to the initial kinetic energy of the proton. The initial kinetic energy can be calculated using the equation: KE = (1/2)mv^2, where KE is the kinetic energy, m is the mass of the proton, and v is the initial velocity.
Since the mass of a proton is approximately 1.67 × 10^-27 kilograms and the initial velocity is 7.60 × 10^5 m/s, we can calculate the initial kinetic energy.
Substituting the values into the equation: KE = (1/2)(1.67 × 10^-27 kg)(7.60 × 10^5 m/s)^2, we find that the initial kinetic energy is approximately 6.06 × 10^-14 joules.
Since the change in potential energy must be equal to the initial kinetic energy, we can equate the two values: ΔPE = 6.06 × 10^-14 J.
Finally, using the equation ΔPE = qΔV and rearranging for ΔV, we can calculate the potential difference: ΔV = ΔPE / q. Substituting the values, we get ΔV ≈ (6.06 × 10^-14 J) / (1.6 × 10^-19 C) ≈ -1.33 × 10^6 volts.
Therefore, the potential difference that stopped the proton was approximately -1.33 × 10^6 volts.
Learn more about: proton
brainly.com/question/12535409
#SPJ11
The potential at the center of uniformly charged circular disk
of radius R = 4.15 cm is Vo=502.77 V. What is the total charge
a
on the disk in nC?
The total charge on the uniformly charged round disk is about 2.3228 nC
To locate the overall rate at the uniformly charged round disk, we can use the formulation for the electric capacity because of a uniformly charged disk at its center.
The electric-powered capability on the middle of a uniformly charged disk is given with the aid of the equation:
V = k * Q / R
in which V is the potential at the middle, ok is the electrostatic consistency (approximately 8.99 x [tex]10^9 Nm^2/C^2[/tex]), Q is the whole charge at the disk, and R is the radius of the disk.
In this situation, we are given the capacity [tex]V0[/tex] as 502.77 V and the radius R as 4.15 cm (or 0.0415 m). We can rearrange the equation to remedy Q:
Q = V * R / k
Substituting the given values:
Q = 502.77 * 0.0415 / (8.99 x [tex]10^9[/tex])
Using a calculator, we are able to compute the value of Q:
Q ≈ 2.3228 x[tex]10^-9[/tex] C
To convert the charge to nanoCoulombs (nC), we multiply via 10^9:
Q ≈ 2.3228 nC
Therefore, the whole charge on the uniformly charged round disk is about 2.3228 nC.
To know more about nanoCoulombs,
https://brainly.com/question/30403410
#SPJ4
Two point charges are separated by 5.6 cm. The attractive force between them is 30 N. Suppose that the charges attracting each other have equal magnitude. Part A Rearrange Coulomb's law and find the magnitude of each charge.
We find that each charge has a magnitude of approximately 0.097 C. To find the magnitude of each charge, we can rearrange Coulomb's law equation to solve for the charges.
Coulomb's law states that the force between two point charges is proportional to the product of their magnitudes and inversely proportional to the square of the distance between them. Mathematically, it can be expressed as F = k * (q1 * q2) / r^2, where F is the force, k is the electrostatic constant, q1 and q2 are the magnitudes of the charges, and r is the distance between them.
In this case, we are given that the attractive force between the charges is 30 N and the distance between them is 5.6 cm (which can be converted to meters as 0.056 m). Rearranging the equation, we have q1 * q2 = (F * [tex]r^2[/tex]) / k.
Substituting the known values, we get q1 * q2 = (30 N * ([tex]0.056 m)^2[/tex]) / k.
The electrostatic constant, k, has a value of approximately 9 x [tex]10^9 Nm^2/C^2[/tex]. Plugging in this value, we can solve for the magnitude of each charge:
q1 * q2 = (30 N * ([tex]0.056 m)^2[/tex]) / (9 x [tex]10^9 Nm^2/C^2[/tex])
q1 * q2 = [tex]0.009408 C^2[/tex]
Since the charges have equal magnitude, we can denote them as q1 = q and q2 = q. Therefore, [tex]q^2[/tex]= 0.009408 [tex]C^2[/tex], which implies q = √(0.009408 [tex]C^2)[/tex].
Calculating the square root, we find that each charge has a magnitude of approximately 0.097 C.
Learn more about Coulomb's law here:
brainly.com/question/506926
#SPJ11
A football is punted into the air. It has an initial vertical velocity of 15 m/s when it leaves the kicker’s foot (assume that air resistance is negligible). What is the vertical velocity 1, 1.5, and 2 seconds after it leaves the kicker’s foot? What is the vertical position 1, 1.5, and 2 seconds after it leaves the kicker’s foot?
When a football is punted into the air, it has an initial vertical velocity of 15 m/s when it leaves the kicker’s foot. The vertical velocity 1 second after it leaves the kicker’s foot can be determined as follows:
u = 15 m/s (given)g = -9.81 m/s² (negative since acceleration due to gravity acts downwards)
Using the formula, v = u + gt, we can find the vertical velocity after 1 second:
v = u + gt= 15 - 9.81 x 1= 5.19 m/s
The vertical velocity 1 second after it leaves the kicker’s foot is 5.19 m/s.
The vertical velocity 1.5 seconds after it leaves the kicker’s foot can be determined using the same formula:
v = u + gt= 15 - 9.81 x 1.5= -3.135 m/s (negative since the ball has been decelerated by gravity)
The vertical velocity 1.5 seconds after it leaves the kicker’s foot is -3.135 m/s.
The vertical velocity 2 seconds after it leaves the kicker’s foot can also be determined using the same formula:
v = u + gt= 15 - 9.81 x 2= -19.62 m/s (negative since the ball is now moving downwards)
The vertical velocity 2 seconds after it leaves the kicker’s foot is -19.62 m/s.
The vertical position 1 second after it leaves the kicker’s foot can be determined using the formula s = ut + (1/2)gt², where s is the vertical position:
s = ut + (1/2)gt²= 15 x 1 + (1/2) x (-9.81) x 1²= 10.095 m
The vertical position 1 second after it leaves the kicker’s foot is 10.095 m.
The vertical position 1.5 seconds after it leaves the kicker’s foot can also be determined using the same formula:
s = ut + (1/2)gt²= 15 x 1.5 + (1/2) x (-9.81) x 1.5²= 8.50725 m
The vertical position 1.5 seconds after it leaves the kicker’s foot is 8.50725 m.
The vertical position 2 seconds after it leaves the kicker’s foot can also be determined using the same formula:
s = ut + (1/2)gt²= 15 x 2 + (1/2) x (-9.81) x 2²= 0 m
The vertical position 2 seconds after it leaves the kicker’s foot is 0 m, which means that it has returned to the ground.
To know more about determined visit :
https://brainly.com/question/29898039
#SPJ11
An object with a height of 40 cm is placed 2.6 m in front of a convex mirror with a focal length of -0.75 m. Part A Determine the approximate location of the image using a ray diagram. Express your answer using two significant figures. ΤΑ ΑΣΦ ? di = = m behind the mirror Submit Request Answer Part B Determine the approximate size of the image using a ray diagram. Express your answer using two significant figures. IVO ΑΣΦ B ? hi = cm Submit Request Answer Part C Is the image upright or inverted? O upright O inverted Submit Request Answer
Part A, the approximate location of the image is approximately 0.582 m behind the mirror. Part B and C, the magnification is positive( 0.223), it indicates that the image is upright.
Part A:
To determine the location of the image, we can use the mirror equation:
1/f = 1/do + 1/di
where:
f = focal length of the convex mirror (given as -0.75 m)
do = object distance (given as 2.6 m)
di = image distance (to be determined)
Rearranging the equation, we have:
1/di = 1/f - 1/do
Substituting the given values:
1/di = 1/(-0.75) - 1/2.6
Calculating the right side of the equation:
1/di ≈ -1.333 - 0.385
1/di ≈ -1.718
Now, we can find di by taking the reciprocal of both sides:
di ≈ -1/1.718
di ≈ -0.582 m
Therefore, the approximate location of the image is approximately 0.582 m behind the mirror.
Part B:
To determine the size of the image, we can use the magnification formula:
m = -di/do
where:
m = magnification
di = image distance (calculated as -0.582 m in Part A)
do = object distance (given as 2.6 m)
Substituting the given values:
m = -(-0.582)/2.6
m ≈ 0.223
Since the magnification is positive, it indicates that the image is upright.
Part C:
To determine whether the image is upright or inverted, we can use the sign of the magnification.
Since the magnification (m) is positive (0.223), the image is upright.
Learn more about magnification here:
https://brainly.com/question/28957672
#SPJ11
Action Action Force Reaction Force A bullet is tired from a gun by the expanding gases. expanding gases pushing on bullet pushing back on the the bullet expanding gases player's hands exert a forward force on the ball A volleyball is served The Moon orbits Earth. moonward pull of the Moon acting on Earth A firewoman opens the fire hose, and water sprays forward. A sprinter's shoe hits the ground. D D
Action, action force, and reaction force are the terms included in the question. A bullet is fired from a gun by the expanding gases, which push forward on the bullet. The bullet exerts a backward action force on the expanding gases. When the player's hands exert a forward force on the ball, the ball exerts a backward reaction force on the player's hands.A volleyball is served, and the server's hand exerts an action force on the ball. The ball exerts an equal and opposite reaction force on the player's hand.The Moon orbits Earth due to the moonward pull of the Moon acting on Earth. The Earth exerts an equal and opposite force on the Moon.A firewoman opens the fire hose, and water sprays forward. The water exerts an action force on the hose backward, and the hose exerts an equal and opposite reaction force on the water forward. When a sprinter's shoe hits the ground, it exerts an action force on the ground. The ground exerts an equal and opposite reaction force on the shoe.
About ReactionA chemical reaction is a natural process that always results in the change of chemical compounds. Compounds or initial compounds involved in the reaction are referred to as reactants. Chemical reactions occur when one or more substances are converted into new substances. This means that the chemical composition of a substance has changed. It is important to remember that matter is neither created nor destroyed in chemical reactions.
Learn More About Reaction at https://brainly.com/question/24795637
#SPJ11
A parallel plate capacitor in air is constructed with two 34 cm×34 cm square conductors separated by 3 mm. a) Determine the value of the capacitance of this parallel plate capacitor. b) This capacitor is placed across a 22 V battery and allowed to fully charge. What is the value of this charge? c) When fully charged, what is the energy stored in this capacitor? d) With the battery still connected, a Pyrex glass dielectric material with dielectric constant k=3.2 is inserted between the plates. completely filling up the space. What is the new charge stored in the capacitor? e) Now when fully charged, what is the energy stored in this capacitor (still connected to the battery and with the Pyrex glass inserted)? To continue, please enter the result of part (e) in units of n J. Round your answer to 0 decimal places.
The area of the plate A = 34 cm x 34 cm = 1156 cm² = 1.156 × 10⁻¹ m²; Separation between the plates d = 3 mm = 3 × 10⁻³ m.
Part (a) The capacitance of the parallel plate capacitor is given by:C = ε₀A/dwhere ε₀ is the permittivity of free spaceC = 8.85 × 10⁻¹² × 1.156 × 10⁻¹ / 3 × 10⁻³C = 4.0 × 10⁻¹¹ F
Part (b) The charge on the capacitor can be calculated asQ = CVQ = 4.0 × 10⁻¹¹ × 22Q = 8.8 × 10⁻¹⁰ C
Part (c) The energy stored in a capacitor is given byU = 1/2 CV²U = 1/2 × 4.0 × 10⁻¹¹ × (22)²U = 4.084 × 10⁻⁸ JPart (d)After the Pyrex glass dielectric material is inserted between the plates, the capacitance of the capacitor changes and becomesC' = kC where k is the relative permittivity of the Pyrex glass dielectric material.C' = 3.2 × 4.0 × 10⁻¹¹C' = 1.28 × 10⁻¹⁰ F The charge on the capacitor remains the same as the charge is conserved.Q = 8.8 × 10⁻¹⁰ CPart (e)The energy stored in the capacitor with the dielectric material inserted is given byU' = 1/2 C'V²U' = 1/2 × 1.28 × 10⁻¹⁰ × (22)²U' = 6.688 × 10⁻⁹ J= 6.69 nJ (rounded to 2 decimal places)
Therefore, the answer is 6.69 nJ.
To know more about Separation visit:
https://brainly.com/question/16774902
#SPJ11
The ratio of useful work output to work input
a. principle
b. efficiency
c. effort
d. load
The ratio of useful work output to work input is known as efficiency. Efficiency quantifies how effectively a system or process converts input energy into useful output energy.
Efficiency is a fundamental concept in various fields, including engineering and physics. It measures the effectiveness of a system or device in utilizing the input energy to produce the desired output. In the context of work, efficiency is calculated by dividing the useful work output by the work input and multiplying by 100 to express it as a percentage. A higher efficiency value indicates a more efficient conversion of input work into useful output work. It is an important factor to consider when evaluating the performance and effectiveness of different systems, machines, or processes. Improving efficiency often involves minimizing energy losses, optimizing designs, and reducing inefficiencies in the system.
To learn more about efficiency
https://brainly.com/question/3617034
#SPJ11
If the velocity versus time graph of an object is a horizontal line, parallel to the +x axis, the object is a) at rest b) moving with zero acceleration c) moving with decreasing speed d) moving with constant non-zero acceleration e) moving with increasing speed
The velocity versus time graph is a graphical representation of an object’s motion. In this case, if the velocity versus time graph of an object is a horizontal line parallel to the +x axis, it means that the object is not accelerating.
Hence, the correct answer is option B – moving with zero acceleration.If the velocity versus time graph is a horizontal line, it implies that the object's velocity is constant with time. A horizontal line indicates that the object's velocity is not changing with time; this means that the object is not accelerating.
Therefore, if an object has a horizontal line parallel to the +x axis in its velocity versus time graph, the object is moving with zero acceleration and a constant velocity, thus, option B is the correct answer.In conclusion, the velocity versus time graph of an object shows the motion of the object. A horizontal line indicates that the object's velocity is constant with time; hence, the object is not accelerating.
To know more about object visit:
https://brainly.com/question/31018199
#SPJ11
Determine the net electric force acting on a point charge qo= -3 μC located at (-1,2) m due to the point charges q₁=-5 μC located at (-2, 3) m and q2 = 12 μC located at (3, 1) m. Express the net electric force in terms of unit vectorrs along x and y directions.
The net electric force acting on the point charge qo is approximately 0.113 N in the positive x-direction and -2.652 N in the negative y-direction.
The steps with calculations to determine the net electric force acting on the point charge qo:
Step 1: Given quantities:
qo = -3 μC
q₁ = -5 μC
q₂ = 12 μC
r₁ = (-2, 3) m
r₂ = (3, 1) m
k = 9 x 10^9 N m²/C²
Step 2: Calculate the distance between qo and q₁:
Δr₁ = r₁ - rₒ = (-2, 3) - (-1, 2) = (-2 + 1, 3 - 2) = (-1, 1)
|Δr₁| = √((-1)² + 1²) = √(1 + 1) = √2
Step 3: Calculate the distance between qo and q₂:
Δr₂ = r₂ - rₒ = (3, 1) - (-1, 2) = (3 + 1, 1 - 2) = (4, -1)
|Δr₂| = √(4² + (-1)²) = √(16 + 1) = √17
Step 4: Calculate the individual electric forces:
F₁ = k * (qo * q₁) / |Δr₁|²
F₁ = (9 x 10^9) * (-3 μC * (-5 μC)) / (2)²
F₁ = (9 x 10^9) * (15 x 10^-6 C²) / 4
F₁ = 3.375 N
F₂ = k * (qo * q₂) / |Δr₂|²
F₂ = (9 x 10^9) * (-3 μC * 12 μC) / (17)²
F₂ = (9 x 10^9) * (-36 x 10^-6 C²) / 289
F₂ = -1.122 N
Step 5: Resolve the forces into their x and y components:
F₁x = F₁ * (xₒ - x₁) / |Δr₁|
F₁x = 3.375 N * (-1 - (-2)) / √2
F₁x = 3.375 N * (1) / √2
F₁x = 2.385 N
F₁y = F₁ * (yₒ - y₁) / |Δr₁|
F₁y = 3.375 N * (2 - 3) / √2
F₁y = 3.375 N * (-1) / √2
F₁y = -2.385 N
F₂x = F₂ * (xₒ - x₂) / |Δr₂|
F₂x = -1.122 N * (-1 - 3) / √17
F₂x = -1.122 N * (-4) / √17
F₂x = -2.272 N
F₂y = F₂ * (yₒ - y₂) / |Δr₂|
F₂y = -1.122 N * (2 - 1) / √17
F₂y = -1.122 N * (1) / √17
F₂y = -0.267 N
Step 6: Calculate the net electric force:
F_net = F₁x * i + F₁y * j + F₂x * i + F₂y * j
F_net = (2.385 N * i - 2.385 N * j) + (-2.272 N * i - 0.267 N * j)
F_net = (0.113 N * i - 2.652 N * j)
Therefore, the net electric force acting on the point charge qo is approximately 0.113 N in the positive x-direction and -2.652 N in the negative y-direction.
To learn more about electric force, click here: https://brainly.com/question/20935307
#SPJ11
A Carnot heat engine uses a hot reservoir consisting of a large amount of boiling water and a cold reservoir consisting of a large tub of ice and water. In 5 minutes of operation of the engine, the heat rejected by the engine melts a mass of ice equal to 5.00x10-2 kg . Part A During this time, how much work W is performed by the engine?
The amount of work W is performed by the engine if the mass of ice melted is 5.00 × 10⁻² kg and the time of operation is 5 minutes is 44.12 J.
To calculate the heat absorbed from the hot reservoir by the heat engine using the formula:
q₁ = m × L
Where L is the latent heat of the fusion of ice, which is 3.33 × 10⁵ J/kg.
Therefore:
q₁ = m × Lq₁ = (5.00 × 10⁻²) × (3.33 × 10⁵)
q₁ = 166.5 J
Now, let's calculate the work done by the heat engine using the formula:
η = W/q₁
Where η is the efficiency of the engine, which is given as the Carnot cycle. Hence,
η = (T₁ - T₂)/T1
Where T₁ is the temperature of the hot reservoir (boiling water), and T₂ is the temperature of the cold reservoir (ice and water mixture).
Hence,
η = (373 - 273)/(373)
η = 0.265 or 26.5%
This is the efficiency of the engine, and thus:
η = W/q₁
W = η × q₁
W = (0.265) × (166.5)
W = 44.12 J
Therefore, the work performed by the engine is 44.12 J.
Learn more about work: https://brainly.com/question/31967973
#SPJ11
If a standing wave on a string is produced by the superposition of the following two waves: y1 = A sin(kx - wt) and y2 = A sin(kx + wt), then all elements of the string would have a zero acceleration (ay = 0) for the first time at: = O t = (3/2)T "where T is the period" O t = "where Tis the period" O t = 1/2"where T is the period" O t= 0 O t = (1/4)T "where T is the period"
To find the time at which all elements of the string have zero acceleration, we need to consider the condition for zero acceleration in the standing wave.
The acceleration of a particle in simple harmonic motion is given by the second derivative of its displacement with respect to time. In this case, the displacement of the particles on the string is given by the superposition of two waves:
y1 = A sin(kx - ωt)
y2 = A sin(kx + ωt)
To find the superposition of these waves, we add them together:
y = y1 + y2 = A sin(kx - ωt) + A sin(kx + ωt)
Now, let's find the acceleration (ay) by taking the second derivative of y with respect to time:
ay = d²y/dt² = -Aω² sin(kx - ωt) - Aω² sin(kx + ωt)
To find the time at which all elements of the string have zero acceleration, we set ay equal to zero:
-Aω² sin(kx - ωt) - Aω² sin(kx + ωt) = 0
Since sin(-θ) = -sin(θ), we can rewrite the equation as:
sin(kx - ωt) + sin(kx + ωt) = 0
Now, let's analyze the equation further.
sin(kx - ωt) + sin(kx + ωt) = 0
Using the trigonometric identity for the sum of sines, we have:
2sin(kx)cos(ωt) = 0
For this equation to be true, either sin(kx) = 0 or cos(ωt) = 0.
If sin(kx) = 0, it implies kx = nπ, where n is an integer.
If cos(ωt) = 0, it implies ωt = (2n + 1)(π/2), where n is an integer.
Now, let's analyze the given options:
t = 0: This doesn't satisfy either sin(kx) = 0 or cos(ωt) = 0.
t = (3/2)T: This option satisfies cos(ωt) = 0 because cos(ωt) = cos(ω(3/2)T) = cos(3π/2) = 0. However, it doesn't satisfy sin(kx) = 0.
t = T/2: This doesn't satisfy either sin(kx) = 0 or cos(ωt) = 0.
t = 0: This doesn't satisfy either sin(kx) = 0 or cos(ωt) = 0.
t = (1/4)T: This option satisfies cos(ωt) = 0 because cos(ωt) = cos(ω(1/4)T) = cos(π/2) = 0. However, it doesn't satisfy sin(kx) = 0.
To learn more about acceleration follow:
https://brainly.com/question/2303856
#SPJ11
what mass of LNG (kg) will the tank hold? What is the quality in the tank? 2.43 A 400-m³ storage tank is being constructed to hold liquified natural gas (LGN), which may be assumed to be essentially pure methane. If the tank is to con- tain 90% liquid and 10% vapor, by volume, at 150 k,
Volume of the tank (V) = 400 m³ Percentage of liquid = 90%Percentage of vapor = 10%Pressure = 150 k PaAssuming that the liquefied natural gas (LNG) is essentially pure methane.
The critical temperature and pressure of methane are 190.6 K and 4.6 MPa, respectively.Since the pressure of the gas inside the tank (150 kPa) is lower than the critical pressure, the methane in the tank is in a compressed liquid state at 150 kPa.Using the Peng-Robinson equation of state, the density of methane at 150 kPa and 120 K (to be explained shortly) is:ρ = 0.434 kg/m³.
The quality of the liquid in the tank (x) can be calculated from the equation:x = ρv/(ρl - ρv), where ρv and ρl are the densities of the vapor and liquid phases, respectively, and v and l are the specific volumes of the vapor and liquid phases, respectively.Since the volume of the tank is 400 m³ and the percentage of liquid is 90%, the volume of the liquid (Vl) in the tank is:Vl = 0.9 × V = 360 m³.
The volume of the vapor (Vv) in the tank is:Vv = 0.1 × V = 40 m³ The specific volume of the compressed liquid can be obtained from the generalized compressibility chart for methane. At 150 kPa and a reduced temperature (Tr) of 0.63, the specific volume is 0.00113 m³/kg.Hence, the mass of the LNG in the tank is:m = Vlρl = 360 × 464 = 167,040 kgTherefore, the mass of LNG that the tank will hold is 167,040 kg.
To know more about essentially visit:
https://brainly.com/question/32563152
#SPJ11
The velocity of a particle is given by v=26t
2
−88t−220, where v is in feet per second and t is in seconds. Plot the velocity v and acceleration a versus time for the first 6 seconds of motion. After you have the plots, answer the questions as a check on your work. Questions: When t=0.8sec,v= ft/sec,a= ft/sec
2
When t=3.4sec,v= ft/sec,a= ft/sec
2
When the acceleration is zero, the velocity is
Given that the velocity of a particle is given by v = 26t² − 88t − 220 feet per second and time is t in seconds. The acceleration a is the rate of change of velocity of the particle. So the acceleration of a particle can be calculated as a=dv/dt. When acceleration is zero, the velocity is a constant and therefore, it is not possible for acceleration to be zero while velocity is changing.
Here, the velocity of a particle v = 26t² − 88t − 220 feet per second.
Therefore, acceleration a = dv/dt = (d/dt) (26t² − 88t − 220)
Using power rule of differentiation, we get
d/dt (26t² − 88t − 220) = 52t − 88ft/sec²
Therefore, the acceleration of the particle is given by a = 52t − 88ft/sec².
We can observe that when t = 0.8 sec, v = - 47.04 ft/sec and a = 6.4 ft/sec²
When t = 3.4 sec, v = - 197.24 ft/sec and a = 108.8 ft/sec²
When acceleration is zero, the velocity is a constant.
Therefore, it is not possible for acceleration to be zero while velocity is changing.
The above values of acceleration a and velocity v are not correct.
Thus, the above values of acceleration a and velocity v are not correct.
Read more about The velocity of a particle.
https://brainly.com/question/28609643
#SPJ11
for each cell, or geographical area, a cellular phone system requires
For each cell or geographical area, a cellular phone system typically requires the following components Base Station, Antennas etc.
For each cell or geographical area, a cellular phone system typically requires the following components;
1. Base Station: A base station, also known as a cell site or cell tower, is a structure that houses the equipment necessary for transmitting and receiving cellular signals. It consists of antennas, transceivers, and other equipment to communicate with mobile devices within the cell.
2. Antennas: Antennas are responsible for transmitting and receiving radio signals between the base station and mobile devices. They are strategically placed on the cell tower or distributed throughout the cell area to ensure optimal coverage and signal strength.
3. Transceivers: Transceivers are devices that enable the base station to transmit and receive signals to and from mobile devices. They handle the encoding, modulation, and decoding of signals to facilitate communication between the base station and mobile devices.
4. Switching Equipment: Switching equipment is responsible for connecting calls and data between different cells and the wider telephone network. It manages the routing of calls and data to their intended destinations.
5. Control Equipment: Control equipment is used to manage and coordinate the operation of the entire cellular network. It handles tasks such as managing handoffs between cells, allocating frequencies, controlling power levels, and managing network resources.
6. Backhaul Connection: A backhaul connection refers to the link that connects the base station to the core network or central switching center. It provides the necessary communication path for transmitting data and voice traffic between the cell site and the wider network.
7. Power Supply: Each cell requires a reliable power supply to ensure continuous operation. This may involve connecting the base station to the electrical grid or using alternative power sources such as batteries or generators in remote areas or during power outages.
These components work together to provide coverage, facilitate communication, and connect mobile devices to the wider cellular network. By dividing the service area into cells and strategically deploying these components, cellular phone systems can efficiently provide wireless communication services to users.
To know more about Base Station here
https://brainly.com/question/31793678
#SPJ4
A kicker accelerates a football from rest to 10.m/s during the time that his toe is in contact with the ball, about 0.20 s. If the football has a mass of 450 g, what is the force delivered by the kicker?
The force delivered by the kicker is 22.5 N. To find out the force delivered by the kicker, we can use the following formula:
Force = (mass x acceleration)
Here, the mass of the football is 450 g. We must first convert it into kilograms, as the standard unit of mass is kilograms.
1 kg = 1000 gSo,
the mass of the football in kilograms is:
450 g ÷ 1000 g/kg = 0.45 kg
The acceleration of the football is given as:
Acceleration
(a) = Change in velocity (Δv) ÷ Time taken (Δt)Initial velocity of the ball, u = 0 (as it is at rest)Final velocity of the ball, v = 10 m/sTime taken, Δt = 0.20 sSo, the acceleration can be found as:
Acceleration (a) = Δv ÷ Δt= (v - u) ÷ Δt= (10 m/s - 0) ÷ 0.20 s= 50 m/s²
Now, we can find the force delivered by the kicker using the formula:
Force = (mass x acceleration)= 0.45 kg x 50 m/s²= 22.5 N
Therefore, the force delivered by the kicker is 22.5 N.
To know more about kicker visit:
https://brainly.com/question/13700629
#SPJ11