Maxwell's correction to Ampere's law resolved an inconsistency by introducing a term to account for the displacement current.
Maxwell's correction to Ampere's law was a crucial development in the field of electromagnetism. Prior to this correction, Ampere's law stated that the magnetic field around a closed loop is proportional to the electric current passing through that loop. However, this law did not fully explain certain electromagnetic phenomena, particularly those involving changing electric fields.
To address this inconsistency, James Clerk Maxwell introduced a modification to Ampere's law by incorporating the concept of displacement current. He realized that a changing electric field can induce a magnetic field, similar to how a current-carrying wire generates a magnetic field. This displacement current, represented by the term ∂D/∂t, accounts for the changing electric field and its associated magnetic effects.
By including the displacement current term in Ampere's law, Maxwell's correction bridged the gap between electromagnetism and the behavior of electric fields. It provided a more complete and consistent description of the interactions between electric and magnetic fields, allowing for a unified theory of electromagnetism.
Learn more about: Electromagnetism
brainly.com/question/31038220
#SPJ11
The area enclosed by a hysteresis loop is the measure of ____________ .
A) retentivity
B) susceptibility
C) permeability
D) energy loss per cycle
The area enclosed by a hysteresis loop is the measure of D) energy loss per cycle.
Explanation: A hysteresis loop represents the behavior of a magnetic material when subjected to a changing magnetic field. It shows the relationship between the magnetic field strength (H) and the magnetic flux density (B). The loop is closed, meaning that as the magnetic field is cycled back and forth, the material retains some residual magnetism.
The area enclosed by the hysteresis loop represents the energy dissipated or lost as heat during one complete cycle of magnetization and demagnetization. This energy loss is primarily due to the internal friction and resistance of the material. The larger the area of the hysteresis loop, the greater the energy loss.
Therefore, the area enclosed by the hysteresis loop serves as a measure of the energy loss per cycle in a magnetic material. It is an important parameter in assessing the efficiency and performance of magnetic devices.
Learn more about hysteresis from the given link:
https://brainly.com/question/32127973
#SPJ11.
What Are The Escape Velocities For The Earth And Sun? Please Write The Answer Neatly.
Escape Velocity:Escape velocity is the speed an object needs to achieve to escape the gravitational force of a celestial body such as a planet or star.
The amount of force required to escape varies depending on the size and mass of the body in question. The escape velocities for the earth and sun are as follows:Escape velocity for earth:It is the speed needed to break free from Earth's gravitational pull. Earth's gravitational force is about 9.8 m/s² at its surface. The escape velocity of earth is 11.2 km/s (40,320 km/h or 25,020 mph).Escape velocity for sun:The escape velocity of the sun is 618 km/s (2.23 million km/h or 1.38 million mph). The escape velocity is the speed an object must achieve to escape the gravitational pull of the sun. Even though the sun is much larger and more massive than Earth, the escape velocity of the sun is much higher than that of Earth, which is due to its enormous mass. The velocities required to escape the gravitational pull of a planet or star are important to space travel and exploration. The escape velocity is dependent on an object's mass, the mass of the body it is escaping from, and the distance between the object and the center of the body.
To Learn more about Escape Click this!
brainly.com/question/30146588
#SPJ11
We use various sources of energy to produce electrical power and for transportation and heating. Sources of commercial energy include fossil fuels (coal, oil, gasoline, natural gas), hydroelectric, wind, direct solar (solar cells, solar water heating, etc), nuclear, biomass, and geothermal. The origin of many of these is ultimately solar.
Question 1: Are fossil fuels ultimately of solar origin?
Question 2: How about hydroelectric?
Question 3: Are any of the sources not ultimately of solar origin?
Fossil fuels are ultimately of solar origin, as they are formed from organic matter that is derived from ancient plants and animals that relied on sunlight for growth.
Hydroelectric power, on the other hand, indirectly relies on solar energy as it is generated by the gravitational potential energy of water, which is driven by the water cycle, which is powered by the Sun. Therefore, hydroelectric power can also be considered of solar origin. All the other listed sources of commercial energy (such as wind, direct solar, nuclear, biomass, and geothermal) can be traced back to solar energy, either directly or indirectly.
Fossil fuels, including coal, oil, gasoline, and natural gas, are formed over millions of years from the remains of plants and animals. These organisms, which lived millions of years ago, obtained their energy through photosynthesis, a process that converts sunlight into chemical energy. Thus, the energy stored in fossil fuels can be traced back to solar energy, making them ultimately of solar origin.
Hydroelectric power, although not directly harnessing solar energy, is still ultimately of solar origin. This is because the water that drives hydroelectric turbines is part of the water cycle, which is powered by the Sun's energy. Solar radiation heats the Earth's surface, causing evaporation of water from oceans, lakes, and rivers. The evaporated water forms clouds and eventually precipitates as rain or snow, leading to the accumulation of water in reservoirs or rivers. The gravitational potential energy of this water is then used to generate hydroelectric power.
All the other listed sources of commercial energy—wind power, direct solar power (such as solar cells and solar water heating), nuclear power, biomass, and geothermal power—are also ultimately dependent on solar energy. Wind is caused by the uneven heating of the Earth's surface by the Sun, while nuclear power is derived from the fusion reactions occurring in the Sun. Biomass originates from plant materials that rely on sunlight for growth, and geothermal power is a result of the Earth's internal heat, which is partly attributed to the Sun's energy that was absorbed by the Earth during its formation.
In summary, fossil fuels and hydroelectric power are ultimately of solar origin. The other sources of commercial energy listed also have their origins tied to solar energy, either directly or indirectly, through processes such as photosynthesis, the water cycle, wind patterns, nuclear fusion in the Sun, growth of biomass, and the Earth's internal heat.
Learn more about ancient plants here:
https://brainly.com/question/10714432
#SPJ11
A line of charge extends from <0,−1,0>m to <0,1,0>m. How does the magnitude of the electric field due to this line of charge at <0.02,0,0>m compare to the electric field due this line of charge at <0.01,0,0>m ? Electric field at <0.02,0,0>m is one-eighth of electric field at <0.01,0,0>m ⇒ Electric field at <0.02,0,0>m is half of electric field at <0.01,0,0>m * Electric field at <0.02,0,0>m is one-sixteenth of electric field at <0.01,0,0×m Electric field at <0.02,0,0>m is equal to the electric field at <0.01,0,0>m Electric field at <0.02,0,0>m is quarter of electric field at ∠0.01,0,0>m
Electric field at <0.02,0,0>m is half of electric field at <0.01,0,0>m.
The magnitude of the electric field due to this line of charge at <0.02,0,0>m compared to the electric field due to this line of charge at <0.01,0,0>m is one-eighth of electric field at <0.01,0,0>m.
A line of charge extending from <0,-1,0>m to <0,1,0>m.
Electric field E at point P due to a line charge of length L and uniform charge density λ is given by
E = λ / 2πε₀r
Where r is the distance between the point P and the line of charge, and ε₀ is the permittivity of free space.
The line of charge extends along the y-axis, thus, the electric field due to this line of charge is directed along the x-axis (the direction of the line perpendicular to the plane defined by the line of charge and point P).
Electric field E at point P1, P2 is given by
E = λ / 2πε₀r
= λ / 2πε₀y
Electric field at P1 with coordinate (0.01, 0, 0) is given by
r₁ = √(x² + y²)
= √(0.01² + 0² + 0²)
= 0.01mE₁
= λ / 2πε₀r₁
= λ / 2πε₀(0.01)
Electric field at P2 with coordinate (0.02, 0, 0) is given by
r₂ = √(x² + y²)
= √(0.02² + 0² + 0²)
= 0.02mE₂
= λ / 2πε₀r₂
= λ / 2πε₀(0.02)
The ratio of the electric field at P2 to that at P1 is
E₂ / E₁ = (λ / 2πε₀(0.02)) / (λ / 2πε₀(0.01))
= (0.01 / 0.02)
= 1 / 2
Therefore, the electric field at P2 is half of the electric field at P1.
Learn more about the magnitude of the electric field from the given link-
https://brainly.com/question/28027633
#SPJ11
An aircraft's lift vector always acts directly opposite it's weight in all aspects of a flight. True False=) Velocity is a vector quantity and therefore a force is needed to change an object's direction; True False
An aircraft's lift vector always acts directly opposite its weight in all aspects of flight is true. The weight of an aircraft always acts directly downwards through the center of gravity of the aircraft.
When the aircraft is at rest on the ground, the weight of the aircraft is balanced by the reaction of the ground. During takeoff, the lift generated by the wings of the aircraft counteracts the weight of the aircraft, allowing it to leave the ground. During level flight, the lift vector acts directly opposite the weight vector, allowing the aircraft to maintain its altitude without climbing or descending.
During descent, the lift vector acts at an angle less than 90 degrees to the weight vector, resulting in a descent. Finally, during ascent, the lift vector acts at an angle greater than 90 degrees to the weight vector, resulting in a climb. Velocity is a vector quantity and therefore a force is needed to change an object's direction; this is true.
Therefore, it is true that a force is needed to change an object's direction.
To know more about vector visit:
https://brainly.com/question/30958460
#SPJ11
Two instruments are playing together. The first instrument is playing a E (659.25 Hz) and the second instrument is playing a E (329.63 Hz). For the following questions use 343 m/s as the speed of sound. How long is the wavelength produced by the first instrument in order to produce the E note? unit: How long is the wavelength produced by the second instrument in order to produce the E note? unit: What is the frequency of the beat created by these two instruments? unit:
The wavelength produced by the first instrument to produce the E note is approximately 0.521 meters. The wavelength produced by the second instrument to produce the E note is approximately 1.043 meters. The beat created by these two instruments has a frequency of approximately 3.37 Hz.
To determine the wavelength produced by each instrument and the frequency of the beat, we need to use the relationship between frequency (f), wavelength (λ), and the speed of sound (v).
The formula for wavelength is given by:
λ = v / f
where:
λ is the wavelength,
v is the speed of sound, and
f is the frequency.
1. First instrument:
The frequency of the E note played by the first instrument is given as 659.25 Hz.
Using the formula for wavelength:
λ = 343 m/s / 659.25 Hz ≈ 0.521 meters
Therefore, the wavelength produced by the first instrument to produce the E note is approximately 0.521 meters.
2. Second instrument:
The frequency of the E note played by the second instrument is given as 329.63 Hz.
Using the formula for wavelength:
λ = 343 m/s / 329.63 Hz ≈ 1.043 meters
Therefore, the wavelength produced by the second instrument to produce the E note is approximately 1.043 meters.
3. Beat frequency:
The beat frequency is the difference between the frequencies of the two instruments.
The beat frequency (f_beat) can be calculated as:
f_beat = | f1 - f2 |
where f1 and f2 are the frequencies of the first and second instruments, respectively.
f_beat = | 659.25 Hz - 329.63 Hz | = 329.62 Hz
Therefore, the beat created by these two instruments has a frequency of approximately 329.62 Hz.
To know more about wavelength click here:
https://brainly.com/question/32900586
#SPJ11
At a particular instant a proton is at the origin, moving with velocity < 3 ✕ 104, -2 ✕ 104, -6 ✕ 104 > m/s. At this instant:
(a) What is the electric field at location < 2 ✕ 10-3, 2 ✕ 10-3, 3 ✕ 10-3 > m, due to the proton?
(b) What is the magnetic field at the same location due to the proton?
a) The electric field at location <2 × [tex]10^{-3}[/tex] , 2 × [tex]10^{-3}[/tex] , 3 × [tex]10^{-3}[/tex] > m, due to the proton, is approximately <6.17 × [tex]10^{8}[/tex] , -4.11 × [tex]10^{8}[/tex] , -1.23 × [tex]10^{9}[/tex]> N/C.
b) The magnetic field at the same location, due to the proton, is approximately <0, 0, 0> T.
a) The electric field at a point due to a charged particle can be calculated using the formula E = k * q / [tex]r^{2}[/tex], where E is the electric field, k is the electrostatic constant (8.99 ×[tex]10^{9}[/tex] N m^2/C^2), q is the charge of the particle, and r is the distance from the particle to the point. In this case, the proton has a charge of +1.6 × [tex]10^{-19}[/tex] C. Plugging in the values, we can calculate the electric field at the given location.
b) The magnetic field due to a moving charged particle can be calculated using the formula B = (μ₀ / 4π) * (q * v x r) / [tex]r^{3}[/tex] , where B is the magnetic field, μ₀ is the permeability of free space (4π × [tex]10^{-7}[/tex] T m/A), q is the charge of the particle, v is the velocity of the particle, and r is the distance from the particle to the point. Since the proton's velocity is given, we can calculate the cross product (v x r) and then use the formula to find the magnetic field at the given location.
In this case, the proton's velocity and the position vector have perpendicular components, resulting in a cross product of zero. Therefore, the magnetic field at the given location due to the proton is approximately <0, 0, 0> T.
Learn more about electric field here:
https://brainly.com/question/11482745
#SPJ11
A parallel plate capacitor is constructed with plates of areas 0.028 m2 and separation 0.55 mm. (a) Calculate capacitance of the capacitor( in pF)? (b) Find the magnitude of the charge (in nC) on each plate of this capacitor when the potential difference between the plates is 60.2 V
(a) The capacitance of the capacitor is approximately 28 pF.
(b) The magnitude of the charge on each plate of the capacitor is approximately 1.71 nC.
(a) The capacitance of a parallel plate capacitor can be calculated using the formula C = ε₀ * (A / d), where C is the capacitance, ε₀ is the vacuum permittivity (8.85 x [tex]10^{-12}[/tex] F/m) , A is the area of the plates, and d is the separation between the plates.
Substituting the given values, we have C = (8.85 x [tex]10^{-12}[/tex] F/m) * (0.028 [tex]m^{2}[/tex] / 0.55 x [tex]10^{-3}[/tex] m). Simplifying the expression gives C ≈ 28 pF.
(b) The charge on each plate of the capacitor can be calculated using the formula Q = C * V, where Q is the charge, C is the capacitance, and V is the potential difference between the plates.
Substituting the given values, we have Q = (28 x [tex]10^{-12}[/tex] F) * (60.2 V). Simplifying the expression gives Q ≈ 1.71 nC.
Therefore, the capacitance of the capacitor is approximately 28 pF, and the magnitude of the charge on each plate is approximately 1.71 nC.
Learn more about capacitor here:
https://brainly.com/question/31627158
#SPJ11
A projectile is launched at 49.9 m/s at 39.6
∘
above the horizontal toward a structure that is 55.8 m away. What is the height of the projectile when it strikes the structure? A rock is thrown up at 41.9 m/s from the top of a 22.4 m cliff. How much time does it take to reach the bottom?
The height of the projectile when it strikes the structure, calculate the vertical displacement using the equations of motion. To determine the time it takes for the rock to reach the bottom, set the vertical displacement equal to zero and solve for time using the equations of motion.
To find the height of the projectile when it strikes the structure, we can use the equations of motion. We first need to calculate the time it takes for the projectile to reach the structure using the horizontal distance and initial velocity. Then, using this time, we can calculate the vertical displacement of the projectile using the equation y = y0 + v0y * t - (1/2) * g * t^2, where y0 is the initial height, v0y is the vertical component of the initial velocity, t is the time, and g is the acceleration due to gravity.
To determine the time it takes for the rock to reach the bottom of the cliff, we can use the equation of motion y = y0 + v0y * t - (1/2) * g * t^2, where y0 is the initial height, v0y is the vertical component of the initial velocity, t is the time, and g is the acceleration due to gravity. We set y equal to zero (since it reaches the bottom) and solve for t.
By substituting the given values into the equations, we can calculate the height of the projectile when it strikes the structure and the time it takes for the rock to reach the bottom of the cliff.
To know more about vertical displacement ,
https://brainly.com/question/31650158
#SPJ11
A 48.8 kg crate rests on a level floor at a shipping dock. The coefficients of static and kinetic friction are 0.721 and 0.282, respectively. What horizontal pushing force is required to (a) just start the crate moving and (b) slide the crate across the dock at a constant speed? (a) Number Units (b) Number Units
The minimum horizontal pushing force required to start the crate moving is 345.012 N. The horizontal pushing force required to slide the crate across the dock at a constant speed is 135.036 N.
The horizontal pushing force required to just start the crate moving and slide the crate across the dock at a constant speed is given as follows;
(a)Just start the crate moving
For the crate to start moving, the force applied must overcome the static friction force between the crate and the floor.The formula for static friction is given as:
f_s = μ_s N
Where f_s = force of static friction,
μ_s = coefficient of static friction and
N = normal force
N = weight of the crate
= m*g
= 48.8 kg * 9.81 m/s²
= 478.728 N
Therefore, f_s = μ_s N
= 0.721 * 478.728 N
= 345.012 N
Thus, the minimum horizontal pushing force required to start the crate moving is 345.012 N.
(b)Slide the crate across the dock at a constant speed
To maintain a constant speed the force of kinetic friction must be overcome. The formula for kinetic friction is given as:
f_k = μ_k N
Where f_k = force of kinetic friction,
μ_k = coefficient of kinetic friction and
N = normal force
N = weight of the crate
= m*g
= 48.8 kg * 9.81 m/s²
= 478.728 N
Therefore, f_k = μ_k N
= 0.282 * 478.728 N
= 135.036 N
Thus, the horizontal pushing force required to slide the crate across the dock at a constant speed is 135.036 N.
Learn more about the coefficient of kinetic friction from the given link-
https://brainly.com/question/19392943
Learn more about the coefficient of static friction from the given link-
https://brainly.com/question/30329921
#SPJ11
Consider this situation: A force is applied to a box to move it to the right across the kitchen floor. Of the forces listed, identify which acts upon the floor.
-Normal
-Gravity
-Applied
-Friction
-Tension
-Air Resistance
Explanation:
Normal (gravity does too....but i do not think they are asking about this)
Friction
An elevator (mass 5000 kg ) is to be designed so that the maximum acceleration is 6.90×10
−2
g. What is the maximum force the motor should exert on the supporting cable? Part B What is the minimum force the motor should exert on the supporting cable?
An elevator with a mass of 5000 kg is to be designed such that the maximum acceleration is[tex]6.90 × 10^-2 g[/tex]. We are required to determine the maximum and minimum force that the motor should exert on the supporting cable. Firstly, let us compute the maximum force that the motor should exert on the supporting cable.
The force required to lift an object is given by F = mg, where m is the mass of the object and g is the acceleration due to gravity. Therefore, the force required to lift the elevator is given by:
[tex]F = mg = 5000 kg × 9.81 m/s^2 = 49050 N[/tex]
The maximum acceleration of the elevator is given by[tex]6.90 × 10^-2 g.[/tex]
Therefore, the maximum force that the motor should exert on the supporting cable is given by:
[tex]F_max = F × 6.90 × 10^-2 = 49050 N × 6.90 × 10^-2 = 3380 N[/tex]
Thus, the maximum force that the motor should exert on the supporting cable is 3380 N. Now, let us compute the minimum force that the motor should exert on the supporting cable. The minimum force that the motor should exert on the supporting cable is the force required to counteract the weight of the elevator when it is descending at the maximum acceleration.
Therefore, the minimum force that the motor should exert on the supporting cable is given by:
[tex]F_min = F − mg = 49050 N − 5000 kg × 9.81 m/s^2 = 0 N[/tex]
Thus, the minimum force that the motor should exert on the supporting cable is 0 N.
To know more about designed visit :
https://brainly.com/question/17147499
#SPJ11
A machinist wishes to insert an iron rod with a diameter of 6 mm into a hole with a diameter of 5.995 mm. By how much would the machinist have to lower the temperature (in °C) of the rod to make it fit the hole?
The machinist should be careful not to cool the rod too much, as this could cause it to become brittle and difficult to work with.
The diameter of the rod is 6 mm. The diameter of the hole is 5.995 mm. The diameter of the rod is greater than the diameter of the hole by 0.005 mm.
To calculate the change in temperature needed to fit the rod into the hole, use the formula:
ΔL = αLΔT
where ΔL = change in length of the rodα
= coefficient of linear expansion
L = length of the rod
ΔT = change in temperature
Rearranging this equation gives:
ΔT = ΔL / (αL)
The change in length needed to fit the rod into the hole is half the difference in diameters
ΔL = (diameter of the rod - diameter of the hole) / 2
= (6 - 5.995) / 2
= 0.0025 mm
Substituting into the formula above:
ΔT = (0.0025 x 10^-3 m) / (11 x 10^-6 K^-1 x 1 m)
≈ 0.23 °C
Therefore, the machinist would have to lower the temperature of the iron rod by approximately 0.23 °C to make it fit the hole.
This change is relatively small, so the machinist may be able to achieve it by cooling the rod in a refrigerator or freezer for a short period of time.
To learn more on temperature :
https://brainly.com/question/27944554
#SPJ11
Light of wavelength λ=500×10
−9
m shines through a single slit of width 1500 nm a) Sketch the pattern that would be formed on a screen far away from the slits. a. Be sure to identify the width of the central maximum as compared with the other diffraction maxima. b. Be sure to identify where m=1,m=2, and m=3 are and what they represent b) Calculate the angle, relative to the center of the central maximum, for the position of the first minimum. c) The slit is 10 meters from the screen. What is the width of the central maximum?
Wavelength of light, λ = 500 × 10⁻⁹ m Width of the slit, a = 1500 nm = 1500 × 10⁻⁹ m Distance of slit from the screen, D = 10 mNow, the angle made by the nth maximum of the diffraction pattern can be given as:
θn = nλ/a Substitute the given values to obtain the angle made by the first minimum:θ1 = λ/a= (500 × 10⁻⁹ m) / (1500 × 10⁻⁹ m)= 1/3 radAlso, the width of the central maximum can be obtained as:W = 2λD/a = (2 × 500 × 10⁻⁹ m × 10 m) / (1500 × 10⁻⁹ m) = 6.67 × 10⁻³ m.Therefore, the answers to the given questions are:
a) The pattern that would be formed on a screen far away from the slit would be as follows:
The central maximum would be the brightest and the width of the central maximum would be greater than the width of other diffraction maxima. The positions of m = 1, 2, and 3 are also marked in the figure below.b) The positions of m = 1, 2, and 3 are marked in the figure above. They represent the positions of the first, second, and third maxima of the diffraction pattern respectively.
c) The width of the central maximum is 6.67 × 10⁻³ m.
About WavelengthWavelength is the distance between the crest of one wave and the same crest of the next wave with an identical phase. Wavelength is the spatial period of a periodic wave — the distance over which the waveform repeats.
Learn More About Wavelength at https://brainly.com/question/10728818
#SPJ11
A Pelton wheel is supplied with water at 0.68 m3/s from a reservoir 30m above it. The bucket mean speed is 12 m/s and water are deflected through 160 deg. Determine the power & efficiency of the wheel. Neglect all friction losses in pipe flow.
The power of the Pelton wheel is 979.2 kW, and the efficiency of the wheel is 82.6%.
To calculate the power of the Pelton wheel, we can use the formula:
Power = (Flow rate) × (Head) × (Acceleration due to gravity)
Given that the flow rate is 0.68 m³/s and the head is 30 m, and using the value of the acceleration due to gravity (9.8 m/s²), we can calculate:
Power = (0.68 m³/s) × (30 m) × (9.8 m/s²) = 1999.68 W ≈ 1999.7 kW
Therefore, the power output of the Pelton wheel is approximately 1999.7 kW or 979.2 kW when rounded to one decimal place.
To calculate the efficiency of the wheel, we can use the formula:
Efficiency = (Power output / Power input) × 100
Since the problem states that there are no friction losses in pipe flow, we can assume that the power input is equal to the power output. Therefore, the efficiency can be calculated as:
Efficiency = (979.2 kW / 1999.7 kW) × 100 = 49% (rounded to one decimal place)
The efficiency of the Pelton wheel is approximately 49% or 82.6% when expressed as a decimal.
Learn more about Pelton wheel
brainly.com/question/30081422
#SPJ11
An object traveling at speed V in a circle of radius Part A R/2 has an acceleration a. If both speed and radius are doubled, the new acceleration will be \begin{tabular}{|l|} \hline 4a. \\ 2a. \\ a/2. \\ 3a. \\ \hline \end{tabular}
The new acceleration of an object traveling at speed V in a circle of radius R/2, after doubling the speed and the radius of the object, is 4a.
The acceleration a of the object moving at speed V in a circle of radius R/2 is given by the formulaa = V^2/R
For the new acceleration, speed and radius are both doubled.
So the new speed and radius will be 2V and R, respectively.
The new acceleration can be calculated as follows:
New acceleration,
a' = (2V)^2
/ R = 4(V^2/R)
= 4a
The new acceleration is 4a.An object moving in a circular path at a constant speed has an acceleration even though its speed is constant.
The change in velocity is due to the change in the direction of motion of the object, which is referred to as centripetal acceleration.
Centripetal acceleration is defined as the acceleration of an object moving in a circular path at a constant speed.
Centripetal acceleration is provided by the force that causes the object to move in a circular path.
The magnitude of centripetal acceleration is given by the equation a = V^2/R, where V is the speed of the object and R is the radius of the circular path.
To know more about traveling visit :
https://brainly.com/question/18090388
#SPJ11
A fan spinning at an angular velocity of 842 rev/min gets turned off. In 2 seconds, the angular velocity decreases to 411 rev/min. Suppose that the angular acceleration is constant. How many revolutions does the fan experiments during this time? Give your answer in a whole number
The fan experiences approximately 14 revolutions during the given time period. The fan experiences a decrease in angular velocity from 842 rev/min to 411 rev/min over a time period of 2 seconds.
To determine the number of revolutions the fan undergoes during this time, we need to calculate the total change in angular displacement.
First, we need to convert the angular velocities from rev/min to radians/s, as the SI unit for angular velocity is radians per second.
Initial angular velocity: 842 rev/min = (842 rev/min) * (2π rad/rev) * (1/60 min/s) = 88.36 rad/s
Final angular velocity: 411 rev/min = (411 rev/min) * (2π rad/rev) * (1/60 min/s) = 42.98 rad/s
Next, we use the formula for angular acceleration:
Angular acceleration (α) = (change in angular velocity) / (time) = (final angular velocity - initial angular velocity) / (time)
= (42.98 rad/s - 88.36 rad/s) / 2 s
= -22.19 rad/[tex]s^2[/tex] (negative sign indicates a decrease in angular velocity)
To find the change in angular displacement, we use the equation:
Δθ = ωi * t + (1/2) * α * [tex]t^2[/tex]
= 88.36 rad/s * 2 s + (1/2) * (-22.19 [tex]rad/s^2[/tex]) * [tex](2 s)^2[/tex]
= 176.72 rad - 88.76 rad
= 87.96 rad
Since one revolution is equivalent to 2π radians, we can calculate the number of revolutions:
Number of revolutions = Δθ / (2π rad/rev)
= 87.96 rad / (2π rad/rev)
≈ 13.98 rev
Therefore, the fan experiences approximately 14 revolutions during the given time period.
Learn more about angular acceleration here:
brainly.com/question/1980605
#SPJ11
as temperature decreases, the frequency at which a hot body emits the maximum amount of energy increases. please select the best answer from the choices provided t f
False (F)
The statement "as temperature decreases, the frequency at which a hot body emits the maximum amount of energy increases" is incorrect. In reality, as temperature decreases, the frequency at which a hot body emits the maximum amount of energy decreases. This relationship is described by Wien's displacement law, which states that the peak wavelength of radiation emitted by a black body is inversely proportional to its temperature.
According to the law, as the temperature of a hot body decreases, the peak wavelength of its emitted radiation shifts to longer wavelengths, which corresponds to lower frequencies. This means that the hot body emits more energy at lower frequencies as the temperature decreases.
As temperature increases, the hot body emits radiation at higher frequencies, which correspond to shorter wavelengths. At higher temperatures, the peak of the radiation spectrum shifts to shorter wavelengths, indicating that the hot body emits more energy at higher frequencies.
Therefore, the correct answer to the question is False (F), as the statement does not accurately reflect the relationship between temperature and the frequency of maximum energy emission.
Learn more about temperature
brainly.com/question/7510619
#SPJ11
mohr-westphal balance
a) First, as a reference measurement, the float is completely submerged in distilled water. In order to keep the scales in balance, a weight of 3 g must be suspended at the rider 5. Calculate the volume Vs of the float.
b) Now the previously dried float is held in the liquid to be examined with density rhox. For balancing, a 1 g weight is attached at position 5 and a 2 g weight at position 8 . Use this to calculate the density of the liquid.
Mohr-Westphal balanceMohr-Westphal balance is an instrument used to determine the density of a liquid. A float is placed in the liquid and the amount of buoyancy of the float is measured. This method is based on Archimedes' principle of buoyancy.
The Mohr-Westphal balance consists of a beam balance and a floatation assembly. The volume Vs of the float can be calculated using the reference measurement of a weight of 3g suspended at rider 5 when the float is completely submerged in distilled water. To keep the scales in balance, we can use the formula:
ρwaterVwater = ρfloatV
floatwhere ρwater is the density of water, V water is the volume of the water displaced by the float, ρfloat is the density of the float, and Vfloat is the volume of the float.
As the float is completely submerged in distilled water, Vwater can be found as the mass of water displaced by the float divided by the density of water, i.e.,Vwater = m water/ρ water
where m water is the mass of water displaced by the float.ρwater is 1000 kg/m³ as water is used as a reference measurement. The density of the liquid can be calculated by hanging a 1g weight at position 5 and a 2g weight at position 8 to the previously dried float in the liquid to be examined with density rhox.
The formula used to balance the float is:ρxVxg + 2ρxVxg + ρxVxg = ρfloatVfloatg + 1ρfloatVfloatgwhere ρx is the density of the liquid, Vx is the volume of the liquid displaced by the float, and g is the acceleration due to gravity.
Simplifying the above equation, we can get:ρx = ρfloat × [1 + (mg/2Vxg)]where m is the mass of the weights and g is the acceleration due to gravity.The density of the liquid can be determined by using the calculated values of Vx and ρx.
To know more about measured visit :
https://brainly.com/question/28913275
#SPJ11
You throw a ball horizontally from a height of 1.6 meters and it travels 23 meters before it hits the ground. How fast was the ball thrown?
The ball was thrown with a horizontal velocity of approximately 10.7 m/s.
When a projectile is launched horizontally, its vertical motion is influenced only by the force of gravity. The time it takes for the ball to reach the ground can be determined using the formula:
h = (1/2) * g * t²
where h is the initial vertical height (1.6 meters), g is the acceleration due to gravity (9.8 m/s²), and t is the time of flight.
Rearranging the equation to solve for the time of flight:
t = √(2h / g)
t = √(2 * 1.6 m / 9.8 m/s²)
t ≈ √(0.326 m / 9.8 m/s²)
t ≈ √0.0333 s²
t ≈ 0.182 s
Since the horizontal distance traveled is given as 23 meters, we can determine the horizontal velocity using the formula:
v = d / t
v = 23 m / 0.182 s
v ≈ 126.37 m/s
Therefore, the ball was thrown with a horizontal velocity of approximately 10.7 m/s.
Learn more about velocity from the given link:
https://brainly.com/question/30559316
#SPJ11
A cylindrical wire has a resistance R and resistivity ϱ. If its length and diameter are BOTH doubled, what will be its resistance? 4. An uncharged 9.0-nF capacitor is connected in series with a 35.0kΩ resistor, and this combination is connected across an ideal 9-V DC battery at time t=0. What is the charge on the capacitor when the current has reached 20% of its initial value?
1: When both the length and diameter of a cylindrical wire are doubled, the resistance remains the same.
2: The resistance of a wire depends on its length, cross-sectional area, and resistivity. When both the length and diameter of the wire are doubled, the volume of the wire increases by a factor of 8 (2³), resulting in a doubling of its cross-sectional area. However, the resistivity remains unchanged.
Resistance (R) is given by the formula: R = (resistivity * length) / (cross-sectional area)
When the length and diameter are doubled, the new length is 2L and the new diameter is 2d. Therefore, the new cross-sectional area is (2d)² = 4d².
Since the resistivity (ρ) remains the same, the new resistance (R') can be calculated as follows:
R' = (ρ * 2L) / (4d²) = (ρ * L) / (2d²)
We can see that the new resistance (R') is equal to half of the original resistance (R). Thus, when both the length and diameter of the wire are doubled, the resistance remains the same.
Learn more about resistance
brainly.com/question/30803596
#SPJ11
A surgical laser with a wavelength of 810 nm delivers 250 mW of power on the retina of a patient. It produces a 1.5 msec duration pulse of light.
What is the energy of each photon?
What is the laser energy per pulse?
How many photons does it produce?
In what region of the spectrum is this light?
The energy of each photon is approximately 2.45 × 10^-19 Joules. The laser energy per pulse is 375 × 10^-6 Joules. The laser produces approximately 1.53 × 10^15 photons. The given wavelength of the laser light, 810 nm, falls in the infrared region of the electromagnetic spectrum.
a. The energy of each photon can be calculated using the equation:
E = hc / λ
Where:
E is the energy of a photon
h is the Planck's constant (approximately 6.626 × 10^-34 J·s)
c is the speed of light in a vacuum (approximately 3 × 10^8 m/s)
λ is the wavelength of the light
λ = 810 nm = 810 × 10^-9 m
Substituting the given values into the equation:
E = (6.626 × 10^-34 J·s × 3 × 10^8 m/s) / (810 × 10^-9 m)
E ≈ 2.45 × 10^-19 J
Therefore, the energy of each photon is approximately 2.45 × 10^-19 Joules.
b. The laser energy per pulse can be calculated by multiplying the power (P) by the duration (t) of the pulse:
Energy per pulse = Power × Duration
Power = 250 mW = 250 × 10^-3 W
Duration = 1.5 msec = 1.5 × 10^-3 s
Energy per pulse = 250 × 10^-3 W × 1.5 × 10^-3 s
Energy per pulse = 375 × 10^-6 J
Therefore, the laser energy per pulse is 375 × 10^-6 Joules.
c. The number of photons produced can be determined by dividing the laser energy per pulse by the energy of each photon:
Number of photons = Energy per pulse / Energy of each photon
Energy per pulse = 375 × 10^-6 J
Energy of each photon = 2.45 × 10^-19 J
Number of photons = (375 × 10^-6 J) / (2.45 × 10^-19 J)
Number of photons ≈ 1.53 × 10^15 photons
Therefore, the laser produces approximately 1.53 × 10^15 photons.
d. The given wavelength of the laser light, 810 nm, falls in the infrared region of the electromagnetic spectrum.
To know more about laser energy, refer here:
https://brainly.com/question/31793928#
#SPJ11
Which of these stars has the coolest surface temperature? (a) an A star (b) an F star (c) a K star.
The K star has the coolest surface temperature among A, F, and K stars. Spectral classes range from hottest to coolest, with A being hotter than F and F being hotter than K. Therefore, the K star has the lowest temperature among the given options.
The temperature of a star is directly related to its spectral class. The spectral classes are labeled with letters, starting from the hottest (O) to the coolest (M). Within each spectral class, the numbers from 0 to 9 further categorize the stars, with 0 being the hottest and 9 being the coolest within that class.
Based on this classification, an A star is hotter than an F star, and an F star is hotter than a K star. Therefore, the K star has the coolest surface temperature among the three options.
It's worth noting that each spectral class covers a wide range of temperatures, and the exact temperature of a star within a class can vary. However, in general, a K star is cooler than an A or an F star.
Therefore option (c) is correct
Learn more about spectral classes here:
https://brainly.com/question/32024723
#SPJ11
What is volumetric expansion?
a. It is the increase in temperature.
b. It is the increase in volume of an object when its temperature increases, the expansion is in all directions.
c. It is the increase in volume of an object when its temperature does not change, it is the expansion in all directions.
d. It is the increase in volume of an object when its temperature decreases, it is the expansion in all directions.
Volumetric expansion is an increase in volume of an object when its temperature increases, the expansion is in all directions.
Volumetric expansion is the amount of change in the volume of a substance or object when its temperature changes.
Solids, liquids, and gases undergo expansion or contraction with temperature changes.
During expansion, the internal energy of an object increases,
which causes the object's particles to move faster and further apart.
On the other hand, a decrease in temperature leads to contraction, which causes the particles to move more slowly and closer together.
option B is the correct answer.
It is the increase in volume of an object when its temperature increases, the expansion is in all directions.
To know more about temperature visit:
https://brainly.com/question/7510619
#SPJ11
n object moves along the x axis according to the equation x=2.70t
2
−2.00t+3.00, where x is in meters and t is in seconds. (a) Determine the average speed between t=1.60 s and t=3.30 s. m/s (b) Determine the instantaneous speed at t=1.60 s. m/s Determine the instantaneous speed at t=3.30 s. m/s (c) Determine the average acceleration between t=1.60 s and t=3.305. m/s
2
(d) Determine the instantaneous acceleration at t=1.60 s. m/s
2
Determine the instantaneous acceleration at t=3.30 s. m/s
2
(e) At what time is the object at rest? 3
(a) Average speed between t = 1.60 s and t = 3.30 s: Approximately 16.28 m/s.
(b) Instantaneous speed at t = 1.60 s: Approximately 6.64 m/s.
Instantaneous speed at t = 3.30 s: Approximately 15.82 m/s.
(c) Average acceleration between t = 1.60 s and t = 3.30 s: Approximately 6.57 m/s^2.
(d) Instantaneous acceleration at t = 1.60 s: Approximately 5.40 m/s^2.
Instantaneous acceleration at t = 3.30 s: Approximately 5.40 m/s^2.
(e) The object is at rest at approximately t = 0.370 s.
To solve this problem, we'll need to find the derivative of the given equation to obtain the velocity function, and then take the derivative again to find the acceleration function. Let's go step by step:
(a) Average speed between t = 1.60 s and t = 3.30 s:To find the average speed, we need to calculate the total distance traveled and divide it by the total time taken. The formula for average speed is: average speed = total distance / total time.
Given:
x(t) = 2.70t^2 - 2.00t + 3.00
To find the total distance traveled, we need to find the displacement between t = 1.60 s and t = 3.30 s. We can do this by evaluating x(3.30) - x(1.60):
Displacement = x(3.30) - x(1.60)
= (2.70 * 3.30^2 - 2.00 * 3.30 + 3.00) - (2.70 * 1.60^2 - 2.00 * 1.60 + 3.00)
= 29.847 - 2.112
= 27.735 meters
The total time taken is 3.30 s - 1.60 s = 1.70 s.
Average speed = total distance / total time
= 27.735 m / 1.70 s
≈ 16.28 m/s
Therefore, the average speed between t = 1.60 s and t = 3.30 s is approximately 16.28 m/s.
(b) Instantaneous speed at t = 1.60 s:
To find the instantaneous speed, we need to find the derivative of the position function x(t) with respect to time (t) and evaluate it at t = 1.60 s.
Given:
x(t) = 2.70t^2 - 2.00t + 3.00
Taking the derivative with respect to t:
v(t) = d(x(t)) / dt
= d(2.70t^2 - 2.00t + 3.00) / dt
= 5.40t - 2.00
Evaluating v(t) at t = 1.60 s:
v(1.60) = 5.40(1.60) - 2.00
= 8.64 - 2.00
≈ 6.64 m/s
Therefore, the instantaneous speed at t = 1.60 s is approximately 6.64 m/s.
Instantaneous speed at t = 3.30 s:
To find the instantaneous speed, we'll use the velocity function we obtained earlier:
v(t) = 5.40t - 2.00
Evaluating v(t) at t = 3.30 s:
v(3.30) = 5.40(3.30) - 2.00
= 17.82 - 2.00
≈ 15.82 m/s
Therefore, the instantaneous speed at t = 3.30 s is approximately 15.82 m/s.
(c) Average acceleration between t = 1.60 s and t = 3.30 s:
To find the average acceleration, we need to calculate the change in velocity and divide it by the total time taken. The formula for average acceleration is: average acceleration = change in velocity / total time.
The change in velocity can be found by evaluating v(3.
30) - v(1.60):
Change in velocity = v(3.30) - v(1.60)
= (5.40 * 3.30 - 2.00) - (5.40 * 1.60 - 2.00)
= 17.82 - 6.64
= 11.18 m/s
The total time taken is 3.30 s - 1.60 s = 1.70 s.
Average acceleration = change in velocity / total time
= 11.18 m/s / 1.70 s
≈ 6.57 m/s^2
Therefore, the average acceleration between t = 1.60 s and t = 3.30 s is approximately 6.57 m/s^2.
(d) Instantaneous acceleration at t = 1.60 s:
To find the instantaneous acceleration, we need to take the derivative of the velocity function v(t) with respect to time (t) and evaluate it at t = 1.60 s.
Given:
v(t) = 5.40t - 2.00
Taking the derivative with respect to t:
a(t) = d(v(t)) / dt
= d(5.40t - 2.00) / dt
= 5.40
The derivative of a constant term is zero, so the instantaneous acceleration at any time is 5.40 m/s^2.
Therefore, the instantaneous acceleration at t = 1.60 s is approximately 5.40 m/s^2.
Instantaneous acceleration at t = 3.30 s:
Since the instantaneous acceleration is constant, it remains the same at t = 3.30 s:
Therefore, the instantaneous acceleration at t = 3.30 s is approximately 5.40 m/s^2.
(e) At what time is the object at rest?
To find when the object is at rest, we need to find the time when the velocity is zero. From the velocity function we obtained earlier:
v(t) = 5.40t - 2.00
Setting v(t) to zero and solving for t:
5.40t - 2.00 = 0
5.40t = 2.00
t = 2.00 / 5.40
t ≈ 0.370 s
Therefore, the object is at rest at approximately t = 0.370 s.
Learn more about average speed
brainly.com/question/13318003
#SPJ11
What is the magnitude of a point charge in coulombs whose electric field 48 cm away has the magnitude 2.9 N/C ? Number Units
Electric field is defined as the electric force per unit charge experienced by a small test charge when placed at that point. The electric field is denoted by E.
Electric field intensity E at a point due to a point charge Q at a distance r from it is given by Coulomb's law,
E = kQ/r²
Where k is Coulomb's constant, whose value is[tex]k = 9 × 10^9 Nm²/C².[/tex]
We can rearrange the above expression to find the value of Q.
We have,
E = kQ/r²⇒ Q = Er²/k
Now, the magnitude of the electric field is given as 2.9 N/C and the distance r from the point charge is 48 cm = 0.48 m.
Substituting these values in the above expression,
[tex]Q = (2.9 N/C) × (0.48 m)² / (9 × 10^9 Nm²/C²)≈ 7.67 × 10^(-8) C[/tex]
Therefore, the magnitude of the point charge is approximately [tex]7.67 × 10^(-8) C.[/tex]
To know more about experienced visit :
https://brainly.com/question/9516896
#SPJ11
The speed of light in a vacuum is approximately 3.00×10^8
m/s. How many miles will the pulse (or light) of a laser travel in an hour? ( 1 hour =3600 s ) speed = distance/time
After performing the division, we find that the pulse of light will travel approximately 670,616,629 miles in an hour.
To calculate the distance traveled by the pulse of light in an hour, we can use the formula:
Distance = Speed × Time
Given that the speed of light in a vacuum is approximately 3.00×[tex]10^8[/tex] m/s and the time is 3600 seconds (1 hour), we can substitute these values into the formula:
Distance = (3.00×[tex]10^8[/tex] m/s) × (3600 s)
Performing the multiplication, we find that the distance traveled by the pulse of light in an hour is:
Distance = 1.08×[tex]10^12[/tex] meters
To convert this distance to miles, we can use the conversion factor 1 mile = 1609.34 meters:
Distance = (1.08×[tex]10^12[/tex] meters) / (1609.34 meters/mile)
To know more about light refer to-
https://brainly.com/question/29994598
#SPJ11
A sound of 92 dB can be heard 150 m away from an outdoor rock concert. Assume the sound produced is isotropic, at what distance in meters is the intensity level 119 dB?
The distance at which the intensity level is 119 dB from the sound source is approximately 28.87 meters.
The intensity level of sound decreases with increasing distance from the source. The relationship between sound intensity level (IL) and distance (r) from the source can be described by the inverse square law. According to this law, the sound intensity level decreases by 6 dB for every doubling of distance from the source.
In this case, we know that the sound can be heard 150 m away with an intensity level of 92 dB. To find the distance at which the intensity level is 119 dB, we can use the formula:
IL1 - IL2 = 10 * log10(r2/r1)
Substituting the given values:
92 - 119 = 10 * log10(r2/150)
Solving for r2, we find that r2 is approximately 28.87 meters. Therefore, at a distance of 28.87 meters from the source, the intensity level of the sound will be 119 dB.
To learn more about intensity level, click here: https://brainly.com/question/30101270
#SPJ11
Your ironworks has contracted to design and build a 500 ft 3
, square-based, open-top, rectangular steel holding tank for a paper company. The tank is to be made by welding thin stainless steel plates together along their edges. As the production engineer, your job is to find dimensions for the base and height that will make the tank weigh as little as possible.
a. What dimensions do you tell the shop to use?
b. Briefly describe how you took weight into account.
a. The dimensions that minimize weight, the base length should be equal to one-eighth of the height.
b. We can achieve a design that minimizes the weight of the tank while still meeting the required specifications.
To find the dimensions that will make the tank weigh as little as possible, we need to consider the relationship between the dimensions, surface area, and volume of the tank. A smaller surface area would require fewer stainless steel plates, reducing the weight of the tank. Additionally, minimizing the height would decrease the volume, resulting in less steel needed overall.
a. To determine the dimensions that minimize weight, we can start by considering a square base for the tank. Let's assume the base has sides of length x. In this case, the surface area of each of the four sides of the tank would be 500 ft² (since the total surface area is 4 times the base area).
Using the formula for the surface area of a rectangular tank:
Surface Area = 2lh + lw + lh
For our square base tank, this simplifies to:
Surface Area = 4x² + xh
To minimize weight, we want to minimize the surface area. Taking the derivative of the surface area with respect to x, we can find the critical points. Differentiating the equation with respect to x yields:
d(Surface Area)/dx = 8x + h
Setting this derivative equal to zero and solving for x, we get:
8x + h = 0
x = -h/8
Since both x and h should be positive (as they represent lengths), we can conclude that x = h/8.
Therefore, for the dimensions that minimize weight, the base length should be equal to one-eighth of the height.
b. To take weight into account, we considered the relationship between surface area, volume, and weight. By minimizing the surface area, we reduce the amount of stainless steel required to construct the tank, thereby reducing its weight. Additionally, minimizing the height of the tank decreases its volume, which further reduces the weight by reducing the amount of steel needed.
By optimizing the dimensions based on these considerations, we can achieve a design that minimizes the weight of the tank while still meeting the required specifications.
To know more about dimensions here
https://brainly.com/question/32980926
#SPJ4
An electron with an initial speed of 1.50×104 m/s passes through a hole in a negative plate. The electron moves toward the positive plate as shown below. The electric field between the plates is 400 V/m and the voltage between the plates is 64.0 V. + + a) Calculate the distance between the plates. [2] b) Calculate the electric force acting on the electron. [2] c) Calculate the electron's speed when it hits the positive plate.
a) The distance between the plates The electric field between the plates is given as 400 V/m. This is the electric force per unit charge.
We can relate the electric force on a test charge q to the electric field E, through the following formula:F = Eqwhere F is the force and q is the charge. The voltage between the plates is given as 64 V. This is the potential difference between the plates. We can relate the potential difference to the electric field, and the distance d between the plates, through the following formula:V = Edwhere V is the voltage, E is the electric field, and d is the distance between the plates.Substituting the given values:E = 400 V/mV = 64 VFrom the second equation above, we can isolate d:d = V/E = 64/400 = 0.16 mTherefore, the distance between the plates is 0.16 m.b) The electric force on the electron We can use the formula given above:F = Eqwhere F is the force, q is the charge, and E is the electric field.Substituting the given values:F = eEwhere e is the charge on an electron, and is equal to -1.6 × 10^-19 C (negative because the electron is negative).F = (-1.6 × 10^-19 C)(400 V/m) = -6.4 × 10^-17 NThe electric force acting on the electron is -6.4 × 10^-17 N. Note that the force is negative because it is in the opposite direction of the electric field.c) The electron's speed when it hits the positive plate We can use the principle of conservation of energy to find the electron's speed when it hits the positive plate. The electron is initially moving, so it has kinetic energy. As it passes through the electric field, it loses some of this kinetic energy, and gains potential energy, due to the voltage between the plates. When it hits the positive plate, it has no potential energy left, but still has some kinetic energy. We can find this kinetic energy, and from there, the electron's speed, as follows:At the beginning, the electron has kinetic energy KE1:KE1 = (1/2)mv1^2where m is the mass of the electron, and v1 is its initial speed. Substituting the given values:KE1 = (1/2)(9.11 × 10^-31 kg)(1.50 × 10^4 m/s)^2 = 1.02675 × 10^-17 JWhen the electron hits the positive plate, it has kinetic energy KE2:KE2 = (1/2)mv2^2where v2 is the final speed. We know that the electron loses electric potential energy Vq (where q is the charge on the electron) as it passes through the electric field. Therefore, we can write:KE2 = KE1 - Vqwhere V is the voltage between the plates.Substituting the given values:KE2 = 1.02675 × 10^-17 J - (64 V)(-1.6 × 10^-19 C) = 1.01895 × 10^-17 JNote that we used a negative value for the charge q, because the electron is negative. Now, we can solve for v2:KE2 = (1/2)(9.11 × 10^-31 kg)v2^2v2^2 = (2KE2)/(9.11 × 10^-31 kg)v2 = sqrt[(2KE2)/(9.11 × 10^-31 kg)] = 1.5003 × 10^4 m/sTherefore, the electron's speed when it hits the positive plate is 1.5003 × 10^4 m/s.
To Learn more about electron Click this!
brainly.com/question/30462082
#SPJ11