Given, Mass of particle 1 = 3m , Mass of particle 2 = m, Distance between particle 1 and 2, r = 2m. Let's find the position where third particle should be placed so that net gravitational force on M due to two particles is zero.
For the net force to be zero on third particle, the net gravitational force of the first two particles on third particle should be equal and opposite.
To achieve this, let's place the third particle at distance d from particle 1 and (2-d) from particle 2.
So, we can write:3mM/d^2 = mM/(2-d)^2 => 3m = (2-d)^2 => d = 2 - sqrt(3)m.
To find the stability of equilibrium of particle M, let's perform the partial differentiation of the gravitational potential energy w.r.t. displacement of M in x and y directions.
(a) Partial differentiation w.r.t. displacement of M in x-direction.
For displacement of M in x direction, the net force equation is given by:F(x) = -dU/dx = -[G3mM/x^2 - GmM/(2-x)^2].
Differentiating w.r.t. x, we get:F'(x) = G3mM(2x)/x^4 - GmM(2(2-x))/ (2-x)^4.
The equilibrium is stable if F''(x) > 0 or concave upwards or the second derivative is positive.F''(x) = 6GmM/(2-x)^5 + 6G3mM/x^5.
So, we can say that the equilibrium is stable if dU/dx is minimum i.e. F'(x) = 0.
(b) Partial differentiation w.r.t. displacement of M in y-direction.
For displacement of M in y direction, the net force equation is given by:F(y) = -dU/dy = -[G3mM/y^2 - GmM/(2-y)^2].
Differentiating w.r.t. y, we get:F'(y) = G3mM(2y)/y^4 - GmM(2(2-y))/ (2-y)^4.
The equilibrium is stable if F''(y) > 0 or concave upwards or the second derivative is positive.F''(y) = 6GmM/(2-y)^5 + 6G3mM/y^5.
So, we can say that the equilibrium is stable if dU/dy is minimum i.e. F'(y) = 0.The equilibrium of M is stable along the line connecting m and 3m as the second derivative of dU/dx and dU/dy is positive.
The equilibrium of M is unstable for points along the line passing through M and perpendicular to the line connecting m and 3m as the second derivative of dU/dx and dU/dy is negative.
Learn more about displacement here ;
https://brainly.com/question/11934397
#SPJ11
6. A object weighing 30 N in air weigh 24.5 N when immersed in water. If the density of water is 1000 kg/m^3, what is the density of the object.
The density of the object is 53497 kg/m^3.
To solve this problem, we can use the concept of buoyancy and the relationship between the weight of an object, the weight of the displaced fluid, and the density of the object.
Given:
Weight of the object in air = 30 N
Weight of the object in water = 24.5 N
Density of water = 1000 kg/m^3
Let's denote the volume of the object as V (in m^3) and the density of the object as ρ (in kg/m^3).
When the object is immersed in water, it experiences an upward buoyant force equal to the weight of the water it displaces. According to Archimedes' principle, this buoyant force is equal to the weight difference between the object in air and in water:
Buoyant force = Weight of the object in air - Weight of the object in water
Substituting the given values:
Buoyant force = 30 N - 24.5 N
Buoyant force = 5.5 N
The buoyant force is also equal to the weight of the fluid displaced by the object, which can be calculated using the formula:
Buoyant force = Density of the fluid * Volume of the object * g
Substituting the given values for the density of water and the volume of the object, we have:
5.5 N = 1000 kg/m^3 * V * 9.8 m/s^2
Simplifying the equation, we find:
V = 5.5 N / (1000 kg/m^3 * 9.8 m/s^2)
V ≈ 0.000561 m^3
Now, we can determine the density of the object by dividing its weight in air by its volume:
ρ = Weight of the object in air / Volume of the object
ρ = 30 N / 0.000561 m^3
Calculating the density, we have:
ρ ≈ 53497 kg/m^3
Therefore, the density of the object is approximately 53497 kg/m^3.
Learn more about density from the given link
#SPJ11
How much greater is the light collecting area of a 4m telescope than that of a 1 meter telescope?
a. 4
b. 8
c. 12
d. 16
The light collecting area of the 4m telescope is 16 times greater than that of the 1m telescope.
Hence, the correct option is D.
The light collecting area of a telescope is directly proportional to the square of its diameter. Therefore, to compare the light collecting areas of a 4m telescope and a 1m telescope:
Light collecting area of a 4m telescope = [tex](4m)^2[/tex] = 16[tex]m^{2}[/tex]
Light collecting area of a 1m telescope = [tex](1m)^2[/tex] = 1[tex]m^{2}[/tex]
The light collecting area of the 4m telescope is 16 times greater than that of the 1m telescope.
Therefore, The light collecting area of the 4m telescope is 16 times greater than that of the 1m telescope.
Hence, the correct option is D.
To know more about telescope here
https://brainly.com/question/19349900
#SPJ4
in a double slit experiment a monochromatic light is used with a wavelength of 5.90 x 10^-7 m. it is found that the fourth-order constructive interference occurs at an angle of 6.0 degrees.
1. what is the required slit separation to achieve this result and the angle at which third-order constructive interference will occur if we use the same slits but a DIFFERENT light whose wavelength is 6.50 x 10^-7 m.
To achieve fourth-order constructive interference at an angle of 6.0 degrees in a double-slit experiment with monochromatic light of wavelength 5.90 x 10⁻⁷ m, the required slit separation is approximately 1.18 x 10⁻⁶ m. When using the same slits but with a different light wavelength of 6.50 x 10⁻⁷ m, the third-order constructive interference will occur at an angle of approximately 5.47 degrees.
Wavelength of monochromatic light (λ₁) = 5.90 x 10⁻⁷ m
Angle for fourth-order constructive interference (θ) = 6.0 degrees
To find the required slit separation (d), we can use the formula for double-slit interference:
d * sin(θ) = m * λ₁
where d is the slit separation, θ is the angle of interest, m is the order of interference, and λ₁ is the wavelength of light.
Substituting the given values into the formula, we have:
d * sin(6.0°) = 4 * 5.90 x 10⁻⁷
Simplifying the equation, we find:
d = (4 * 5.90 x 10⁻⁷) / sin(6.0°)
d ≈ 1.18 x 10⁻⁶ m
Therefore, the required slit separation to achieve fourth-order constructive interference is approximately 1.18 x 10⁻⁶ m.
Now, let's consider the second part of the question. We are using the same slits but with a different light wavelength of 6.50 x 10⁻⁷ m. We need to find the angle at which third-order constructive interference occurs (θ₂).
Using the same formula as before, but with the new wavelength (λ₂), we have:
d * sin(θ₂) = 3 * 6.50 x 10⁻⁷
Substituting the given values into the formula, we find:
d * sin(θ₂) = 3 * 6.50 x 10⁻⁷
To find θ₂, we rearrange the equation as:
θ₂ = sin⁻¹((3 * 6.50 x 10⁻⁷) / d)
Substituting the value of d obtained earlier, we have:
θ₂ = sin⁻¹((3 * 6.50 x 10⁻⁷) / (1.18 x 10⁻⁶))
Calculating the value, we find:
θ₂ ≈ 5.47 degrees
Therefore, when using the same slits but with a different light wavelength, the third-order constructive interference will occur at an angle of approximately 5.47 degrees.
To know more about monochromatic light refer here:
https://brainly.com/question/32064872#
#SPJ11
most cranial nerves carry both sensory and motor innervation. a. true b. false
The statement "most cranial nerves carry both sensory and motor innervation" is true
As most of the cranial nerves carry both sensory and motor innervation.
Sensory fibers carry the sensations of sight, sound, and smell from various parts of the body to the brain, while motor fibers stimulate or control the muscles of the body and glands. The cranial nerves are a set of 12 nerves that arise from the brainstem and control the various functions of the head, neck, and internal organs.
The nerves are numbered I through XII, and each nerve is responsible for a particular function or group of functions in the body. They are responsible for sensory and motor innervation for various parts of the head and neck, as well as some visceral organs in the body.
The motor and sensory functions of cranial nerves are intermingled, so that most of the nerves carry both sensory and motor fibers.
For example, the trigeminal nerve is responsible for both facial sensation and the control of the muscles of the face, while the glossopharyngeal nerve is responsible for both taste sensation and the control of the muscles of the tongue. In conclusion, the statement "most cranial nerves carry both sensory and motor innervation" is true.
To learn more about sensory follow the given link
https://brainly.com/question/25753221
#SPJ11
A 5.00 kg block is placed on a 37.0
∘
incline and released from rest. If the acceleration of the block is 4.00 m/s
2
down the incline, what is the magnitude of the friction force on the block as it slides down the incline? (a) 49.0 N (b) 29.5 N (c) 20.0 N (d) 9.5 N (e) 2.5 N (f) none of these answers
The magnitude of the friction force on the block as it slides down the incline is 4.5 N. The answer is not provided among the options given (a, b, c, d, e, f).
To determine the magnitude of the friction force on the block as it slides down the incline, we need to consider the forces acting on the block.
First, we can calculate the component of the force of gravity parallel to the incline. This component is given by m * g * sin(θ), where m is the mass of the block, g is the acceleration due to gravity (9.8 m/s^2), and θ is the angle of the incline (37.0°).
The net force acting on the block is equal to the product of the mass and the acceleration. Since the block is moving down the incline, the net force is the difference between the parallel component of the force of gravity and the friction force.
Now, let's set up the equation:
m * g * sin(θ) - friction force = m * acceleration
Plugging in the values:
m = 5.00 kg
g = 9.8 m/s^2
θ = 37.0°
acceleration = 4.00 m/s^2
We can solve for the friction force:
5.00 kg * 9.8 m/s^2 * sin(37.0°) - friction force = 5.00 kg * 4.00 m/s^2
Simplifying the equation, we find:
24.5 N - friction force = 20.0 N
Rearranging the equation to solve for the friction force:
friction force = 24.5 N - 20.0 N = 4.5 N
Therefore, the magnitude of the friction force on the block as it slides down the incline is 4.5 N. The answer is not provided among the options given (a, b, c, d, e, f).
Learn more about friction force here:
https://brainly.com/question/30280206
#SPJ11
A proton traveling at 4.38 × 105 m/s moves into a
uniform 0.040-T magnetic field. What is the radius of the proton's
resulting orbit?
The radius of the proton's resulting orbit can be calculated using the equation (mv) / (qB), where m is the mass of the proton, v is its velocity, q is its charge, and B is the magnetic field strength. By substituting the given values and solving the equation, we can determine the radius of the orbit.
To find the radius of the proton's resulting orbit, we can use the equation for the centripetal force experienced by a charged particle moving in a magnetic field:
F = qvB
where F is the centripetal force, q is the charge of the proton, v is its velocity, and B is the magnetic field strength. The centripetal force is provided by the magnetic force acting on the proton. The magnetic force is given by:
F = qvB = [tex](mv^2[/tex]) / r
where m is the mass of the proton and r is the radius of the orbit. Rearranging the equation, we can solve for r:
r = (mv) / (qB)
Substituting the given values of the proton's velocity, mass, charge, and the magnetic field strength, we can calculate the radius of the proton's resulting orbit.
To know more about centripetal force refer to-
https://brainly.com/question/14021112
#SPJ11
List the 3 major components of an electroscope
Describe the nature of dielectrics.
The three major components of an electroscope are the metal case, the metal stem, and the metal leaves. Dielectrics are insulating materials that do not conduct electric current. They are characterized by their ability to store and separate electric charges within an electric field.
An electroscope is an instrument used to detect the presence and magnitude of electric charges. It consists of three main components: the metal case, the metal stem, and the metal leaves. The metal case provides a protective enclosure for the internal components of the electroscope.
The metal stem extends from the case and serves as a conductor for the electric charges. At the top of the stem, there are usually two metal leaves that are capable of moving freely. When an electric charge is applied to the stem, the metal leaves experience a repulsive force, causing them to separate.
Dielectrics, on the other hand, are insulating materials commonly used in capacitors and other electrical devices. Unlike conductors, dielectrics do not allow electric current to flow through them. They possess high resistivity and are able to store and separate electric charges within an electric field.
Dielectrics are characterized by their ability to polarize in the presence of an electric field, aligning their internal dipoles and increasing the capacitance of a capacitor. Dielectric materials can be solids, liquids, or gases, and their properties depend on factors such as their composition, structure, and temperature.
Learn more about Electroscope
brainly.com/question/31600722
#SPJ11
Considering motion with a constant velocity: What happens to changes in distance during equal time intervals? Is this what you would expect? 3. What is the rate of travel of the toy over (a) a flat surface, (b) a surface elevated 10 cm high, (c) a surface elevated 20 cm high, and (d) a surface elevated 30 cm high?
Considering motion with constant velocity, the distance travelled by the moving object during equal time intervals will always be the same.
If a moving toy is travelling at a constant velocity, it will travel the same distance over equal time intervals.
This is because its velocity is not changing. The moving toy covers equal distances in equal times. Yes, this is what is expected. It is what scientists call uniform motion.
The speed of a toy travelling over a flat surface, an elevated surface of 10 cm, 20 cm, and 30 cm, all vary.
However, its velocity remains constant over any of the surfaces and hence covers the same distance in equal time intervals.Among the four surfaces, the toy's rate of travel will be the fastest when travelling on the flat surface. The surface of the elevated platforms will impede the movement of the toy and cause its rate of travel to decrease. However, the velocity of the toy remains constant throughout its journey.
The distance travelled over the elevated surfaces will also be different from the distance travelled over the flat surface.
To know more about velocity visit :
https://brainly.com/question/30559316
#SPJ11
[5] Inelastic collision preserves: a) Velocities Y N b) Masses Y N c) Momentum. Y N d) Kinetic energy. Y N [6] Energy of Simple Harmonic Motion consist of: a) Kinetic energy Y N b) Potential energy Y N c) Internal energy Y N d) Kinetic and potential energy Y N [7] Main characteristics of Simple Harmonic Motion are: a) Constant period b) Constant amplitude c) Independence between period and amplitude. d) Displacement is sine or cosine function. e) Velocity is linear function. f) Acceleration is quadratic function [8] Complete set of features of components of vectors contains: a) Magnitude, direction and orientation Y b) Angle and magnitude Y c) Starting point, orientation, direction and magnitude Y d) Magnitude and orientation Y yoooooo zoooooo N N N N Z Z N
1. Inelastic collision preserves: c) Momentum. [Yes] d) Kinetic energy. [No]
2. Energy of Simple Harmonic Motion consists of: d) Kinetic and potential energy. [Yes]
3. Main characteristics of Simple Harmonic Motion are: a) Constant period [Yes] b) Constant amplitude [Yes] d) Displacement is sine or cosine function. [Yes] e) Velocity is linear function. [No] f) Acceleration is quadratic function [No]
4. Complete set of features of components of vectors contains: a) Magnitude, direction and orientation [Yes] b) Angle and magnitude [No] c) Starting point, orientation, direction and magnitude [No] d) Magnitude and orientation [No]
1. In an inelastic collision, momentum is preserved. This means that the total momentum before and after the collision remains the same. However, kinetic energy is not necessarily conserved in an inelastic collision as some energy may be converted into other forms such as heat or deformation.
2. The energy of simple harmonic motion consists of both kinetic energy and potential energy. As the oscillating object moves back and forth, it alternates between kinetic energy (when it is in motion) and potential energy (when it is at its maximum displacement).
3. The main characteristics of simple harmonic motion are:
a) Constant period, which means that the time taken for one complete oscillation remains the same.
b) Constant amplitude, which indicates that the maximum displacement from the equilibrium position remains constant.
d) Displacement follows a sine or cosine function, showing a periodic pattern.
e) Velocity is not a linear function but rather varies with the position of the object.
f) Acceleration is not a quadratic function but rather varies with the position of the object.
4. The complete set of features of components of vectors includes magnitude, direction, and orientation. The magnitude represents the size or length of the vector, while the direction indicates the line along which the vector is pointing. The orientation specifies the sense or rotation of the vector in space.
To know more about Inelastic collision click here:
https://brainly.com/question/30460808
#SPJ11
be driving a nail with a hammer When a hammer with a mass of 5.5kg hits a nail. the hammer stops at a speed of 4.8m/s and stops in about 7.4ms. 1) How much impact does the nail receive? 2) What is the average force acting on a nail?
1) the impact that the nail receives is -149.856 Joules
2) the average force acting on a nail is 7.43 kN (approx.)
1) The impact that the nail receives can be calculated using the formula for kinetic energy as given below;
Kinetic energy = 0.5 * mass * velocity²
Kinetic energy of the hammer before hitting the nail can be calculated as;
KE1 = 0.5 * m * v²
Where,m = mass of the hammer = 5.5 kgv = velocity of the hammer before hitting the nail = 0 m/s
KE1 = 0.5 * 5.5 * 0² = 0 Joules
Kinetic energy of the hammer after hitting the nail can be calculated as;
KE2 = 0.5 * m * v²
Where,v = velocity of the hammer after hitting the nail = 4.8 m/sKE2 = 0.5 * 5.5 * 4.8² = 149.856 Joules
The impact that the nail receives can be calculated as the difference in kinetic energy before and after hitting the nail.
Impact = KE1 - KE2 = 0 - 149.856 = -149.856 Joules
2) The average force acting on a nail can be calculated using the formula given below;
Average force = (final velocity - initial velocity) / time taken
The time taken by the hammer to stop after hitting the nail is given as 7.4 ms = 0.0074 seconds.
The final velocity of the hammer after hitting the nail is 4.8 m/s
.The initial velocity of the hammer before hitting the nail can be calculated using the formula of motion as given below;v = u + atu = v - at
Where,u = initial velocity of the hammer
a = acceleration of the hammer = F / mu = a * t + (v - u)
F = mu * a
Where,m = mass of the hammer
a = acceleration of the hammer = F / mut = time taken by the hammer to stop after hitting the nail
v = final velocity of the hammer after hitting the nail
u = initial velocity of the hammer before hitting the nail
u = v - a * tu = 4.8 - (F / m) * 0.0074
The average force acting on the nail can be calculated using the above equations.
Average force = (4.8 - (F / m) * 0.0074 - 0) / 0.0074F = (4.8 - u) * m / t
Average force = (4.8 - (4.8 - (F / m) * 0.0074)) * m / 0.0074
Average force = F * 5.5 / 0.0074
Average force = 7432.4324 * F
Average force = 7.43 kN (approx.)
Learn more about kinetic energy at
https://brainly.com/question/15032311
#SPJ11
2) A Nebraska Cornhusker football player runs in for a touchdown and inadvertently hits the padded goalpost. At the time of the collision he was running at a velocity of 7.50 m/s and came to a full-stop after compressing the goalpost padding (and his uniform padding) by .350 meters. a) What was his deacceleration? b) How long does the collision last?
The player experiences a deceleration of approximately 80.36 m/s² when colliding with the goalpost padding and comes to a full-stop. The collision lasts for approximately 0.0933 seconds.
a) To find the deceleration, we can use the equation of motion:
v² = u² + 2as
where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the displacement.
Since the player comes to a full-stop, the final velocity is 0 m/s, the initial velocity is 7.50 m/s, and the displacement is -0.350 m (taking the direction of compression as negative).
0² = (7.50)² + 2a(-0.350)
Simplifying the equation:
0 = 56.25 - 0.70a
Rearranging the terms:
0.70a = 56.25
a = 56.25 / 0.70
a ≈ 80.36 m/s²
Therefore, the deceleration of the player is approximately 80.36 m/s².
b) To find the time duration of the collision, we can use the equation:
v = u + at
where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time.
Since the player comes to a full-stop, the final velocity is 0 m/s, the initial velocity is 7.50 m/s, and the acceleration is -80.36 m/s² (taking deceleration as negative).
0 = 7.50 + (-80.36)t
Rearranging the terms:
80.36t = 7.50
t ≈ 0.0933 seconds
Therefore, the collision lasts approximately 0.0933 seconds.
To know more about deceleration refer to-
https://brainly.com/question/18417367
#SPJ11
Figure 1: Triangular Resistive network 1. (6pt) Use circuit theory to find the effective resistance: (a) (2pt) R
12
( a battery is cotnocted to node 1 and node 2). (b) (2pt) R
1Ω
(a battery is cotasected to aode 1 and aode 3). (c) (2pt) R
2s
( a battery is cotnected to aode 2 and node 3 ). 2. (3pt) Find the Laplacin (the Kirchhoff) matrix L associated to this resistive network- 3. (16pt) Find the eigenvalues (λ
n
) and the eqemvectors (u
n
) of the matrix L. 4. (10pt) Find the matrices D and r
−T
such that D=F
T
LI ENGINEERING MATHEMATICS I GA ASSIGNMENT where D=
⎝
⎛
λ
1
0
0
0
λ
2
0
0
0
λ
3
⎠
⎞
,λ
1
<λ
2
<λ
1
5. (15pt) Use the "two point resistance" theoten to find the effective resistance: (a) (5pt)R
12
(b) (5pt)R
13
(c) (5pt)R
23
The two-point resistance theorem to determine the effective resistance as follows R12=R1+R2+(R1R2/R3)=1+2+(1×2/1)=5/3Ω and R13=R1+R3+(R1R3/R2)=1+1+(1×1/2)=3/2Ω and R23=R2+R3+(R2R3/R1)=2+1+(2×1/1)=4Ω.
(a) We can use circuit theory to determine the effective resistance, which gives:R12=1+2=3Ω.
The effective resistance can be determined using circuit theory, which gives:R13=(1×2)/(1+2)=2/3Ω
(c) We can determine the effective resistance using circuit theory, which gives:R23=1+2=3Ω.2.
We can use the nodal analysis method to calculate the Laplacian (Kirchhoff) matrix L associated with this resistive network. This matrix is given by:L = [ 3 -1 -2-1 2 -1-2 -1 3 ]3.
By using the Kirchhoff matrix L, the eigenvalues (λn) and eigenvectors (un) of the matrix L are calculated.
Since the dimension of matrix L is 3×3, the characteristic equation is given as:|L - λI|= 0, where I is the identity matrix of order 3.
Therefore, we can get the eigenvalues as follows:|L - λI| = [3-λ][2-λ](3-λ)-[(-1)][(-2)][(-1)] = 0=> λ3 - 8λ2 + 13λ - 6 = 0=> (λ - 1)(λ - 2)(λ - 3) = 0.
Hence, the eigenvalues of matrix L are λ1=1, λ2=2 and λ3=3.
Then, the eigenvectors of matrix L can be obtained by solving the following system of equations:(L - λnIn)un = 0.
We can solve for the eigenvectors corresponding to each eigenvalue:For λ1 = 1:[(3-λ) -1 -2-1 (2-λ) -1-2 -1 (3-λ)] [u1,u2,u3]T=0For λ1=1, we have the following:2u1 - u2 - 2u3 = 0 u1 - 2u2 + u3 = 0 u1 = u1.
Then the eigenvector is:u1 = [ 1, 1, 1 ]TFor λ2 = 2:[(3-λ) -1 -2-1 (2-λ) -1-2 -1 (3-λ)] [u1,u2,u3]T=0For λ2=2, we have the following:u2 - u3 = 0 u1 - u3 = 0 2u2 - u1 - 2u3 = 0.
Then the eigenvector is:u2 = [ -1, 0, 1 ]TFor λ3 = 3:[(3-λ) -1 -2-1 (2-λ) -1-2 -1 (3-λ)] [u1,u2,u3]T=0For λ3=3, we have the following:u1 + 2u2 + u3 = 0 u2 + 2u3 = 0 u1 + 2u2 + u3 = 0.
Then the eigenvector is:u3 = [ 1, -2, 1 ]T.4.
Here is the procedure for calculating the D and r-T matrices using the eigenvectors of L:Arrange the eigenvectors in the columns of a matrix F as follows:F = [ u1 u2 u3 ].
Construct the diagonal matrix D by arranging the eigenvalues in decreasing order along the diagonal, as follows:D = [λ1 0 0 0 λ2 0 0 0 λ3].
Compute the inverse of matrix F and denote it by F-1Calculate the matrix r-T by using the following formula:r-T = F-1Calculate the D matrix by using the following formula:D = F-1 L F.5.
We can use the two-point resistance theorem to determine the effective resistance as follows:(a) R12=R1+R2+(R1R2/R3)=1+2+(1×2/1)=5/3Ω(b) R13=R1+R3+(R1R3/R2)=1+1+(1×1/2)=3/2Ω(c) R23=R2+R3+(R2R3/R1)=2+1+(2×1/1)=4Ω.
Learn more about resistance here ;
https://brainly.com/question/29427458
#SPJ11
A transverse sinusoidal wave of wave vector k=4.38rad/m is traveling on a stretched string. The transverse speed of a particle on the string at x=0 is 45.5 m/s. What is the speed of the wave in m/s, when it displaces 2.0 cm from the mean position? Provided the displacement is 4.0 cm when the transverse velocity is zero.
A transverse sinusoidal wave of wave vector k=4.38rad/m is traveling on a stretched string.
The transverse speed of a particle on the string at x=0 is 45.5 m/s. The wave equation of the string is given by,[tex]\[y = A \sin (kx - \omega t)\][/tex] Where y is the displacement, A is the amplitude, k is the wave vector, x is the position, t is the time and ω is the angular frequency of the wave.
The transverse velocity of a particle at position x on the string is given by,
[tex][v = \frac{\partial y}{\partial t} = - A\omega \cos (kx - \omega t)\]At x = 0, y = A sin (0) = 0, and v = 45.5 m/s.So, \[45.5 = - A\omega \cos (0)\][/tex]
∴[tex]\[\omega = - \frac{45.5}{A} \]At x = 0.02 m, y = A sin (0.0876 - ωt) = 0.04 m and v = 0.[/tex]
Using [tex]\[k = \frac{2\pi}{\lambda} = \frac{2\pi}{x}\]∴ \[x = \frac{2\pi}{k}\]∴ \[kx = 2\pi\]At x = 0.02 m, \[kx = 0.0876\]So, \[\omega t = 0.0876 - \sin ^{-1} (\frac{0.04}{A})\][/tex]
The velocity of the wave is given by, [tex]\[v_{wave} = \frac{\omega}{k} = \frac{2\pi}{\lambda} = \frac{\lambda f}{\lambda} = f\][/tex] where f is the frequency of the wave.
To know more about sinusoidal visit:
https://brainly.com/question/32356854
#SPJ11
An airplane in a holding pattern flies at constant altitude along a circular path of radius 3.26 km. If the airplane rounds half the circle in 180 s, determine the following. (a) Determine the magnitude of the airplane's displacement during the given time (in m ). m (b) Determine the magnitude of the airplane's average velocity during the given time (in m/s ). m/s (c) What is the airplane's average speed during the same time interval (in m/s )? m/s
Given data:The airplane flies at a constant altitude along a circular path of radius `r = 3.26 km`
The airplane rounds half the circle in `t = 180 s`
Part (a) Magnitude of the airplane's displacement during the given time:
The displacement is given by the difference between the initial and final positions of the airplane.
Displacement `s = 2r` (since the airplane rounds half the circle)Displacement `s = 2 × 3.26 km`Displacement `s = 6.52 km`We know that `1 km = 1000 m`.
Hence,Displacement `s = 6.52 km × 1000 m/km`Displacement `s = 6520 m`Therefore, the magnitude of the airplane's displacement during the given time is `6520 m`.
Part (b) Magnitude of the airplane's average velocity during the given time:
Average velocity `v` is given by the ratio of the displacement and time.
Average velocity `v = s/t`Average velocity `v = 6520 m/180 s`Average velocity `v = 36.22 m/s`
The magnitude of the airplane's average velocity during the given time is `36.22 m/s`.
Part (c) Magnitude of the airplane's average speed during the given time:
Average speed is given by the ratio of the total distance covered by the airplane and time.Average speed `v_ave = d/t`We know that the total distance covered by the airplane is the circumference of the circle.
Total distance `d = 2πr`Total distance `d = 2π × 3.26 km`Total distance `d = 20.49 km`Converting km to m,Total distance `d = 20.49 km × 1000 m/km`Total distance `d = 20,490 m`Average speed `v_ave = d/t`Average speed `v_ave = 20,490 m/180 s`Average speed `v_ave = 113.83 m/s`
The airplane's average speed during the given time interval is `113.83 m/s`.
Hence, the magnitudes of the airplane's displacement, average velocity, and average speed during the given time are `6520 m`, `36.22 m/s`, and `113.83 m/s` respectively.
To know more about altitude visit:
https://brainly.com/question/31017444
#SPJ11
The electron mass is 9×10
−31
kg. What is the momentum of an electron traveling at a velocity of ⟨0,0,−2.6×10
8
⟩m/s ?
p
= kg⋅m/s What is the magnitude of the momentum of the electron? p= \& kg⋅m/s
An electron is moving with a velocity of -2.6 x 10^8 m/s.
Calculate the momentum and magnitude of the momentum of the electron.
The mass of the electron is
[tex]9 × 10^−31 kg.[/tex]
The electron mass is an essential property of the electron, having a value of
[tex]9×10^−31 kg.[/tex]
The momentum of the electron is given by:
[tex]$p = mv$[/tex]
where p is the momentum, m is the mass of the electron, and v is the velocity.
Substituting the values given into the equation:
[tex]$$p = (9×10^{−31} kg) × (-2.6×10^{8} m/s)$$$$p = -2.34×10^{-22} kg⋅m/s$$[/tex]
The momentum of the electron is
[tex]-2.34×10^−22 kg·m/s.[/tex]
The magnitude of momentum is the absolute value of momentum.
It is given by:
[tex]$$|p| = |-2.34×10^{−22} kg⋅m/s|$$$$|p| = 2.34×10^{−22} kg⋅m/s$$[/tex]
the magnitude of the momentum of the electron is 2.34×10^−22 kg·m/s.
To know more about velocity visit:
https://brainly.com/question/30559316
#SPJ11
Two point charges of equal magnitude are 7.0 cm apart. At the midpoint of the line connecting them, their combined electric field has a magnitude of 48 Part A N/C. Find the magnitude of the charges. Express your answer using two significant figures.
The answer to this question is that the magnitude of the charges is 1.3 μC.
To find the magnitude of the charges, we can use the formula for the electric field due to a point charge:
E = k * (|q1| / r1^2) + k * (|q2| / r2^2)
where E is the combined electric field at the midpoint, k is the electrostatic constant (8.99 x 10^9 N m^2/C^2), q1 and q2 are the magnitudes of the charges, and r1 and r2 are the distances from the charges to the midpoint.
Given that the charges are of equal magnitude and the electric field at the midpoint has a magnitude of 48 N/C, we can set up the equation as follows:
48 N/C = k * (|q| / (0.035 m)^2) + k * (|q| / (0.035 m)^2)
Simplifying the equation, we get:
48 N/C = 2 * k * (|q| / (0.035 m)^2)
Dividing both sides of the equation by 2k and rearranging, we have:
(|q| / (0.035 m)^2) = 48 N/C / (2 * k)
Solving for |q|, we find:
|q| = (48 N/C / (2 * k)) * (0.035 m)^2
Plugging in the values for k (8.99 x 10^9 N m^2/C^2) and the distance (0.035 m), we can calculate:
|q| = (48 N/C / (2 * (8.99 x 10^9 N m^2/C^2))) * (0.035 m)^2
Simplifying the equation, we get:
|q| ≈ 1.3 μC
Therefore, the magnitude of the charges is approximately 1.3 μC.
Learn more about Magnitude
brainly.com/question/31022175
#SPJ11
1. Give a definition of Peak Inverse Voltage of a diode in a
Rectifier Circuit
2. Give the importance of Peak Inverse Voltage of a diode in a
Rectifier Circuit
3. Write a short essay describing the st
Definition of Peak Inverse Voltage of a diode in a Rectifier Circuit Peak inverse voltage (PIV) is a term used to describe the highest possible voltage that can be produced when the diode in a rectifier circuit is reverse-biased.
The PIV is determined by the maximum reverse voltage applied to the diode in the circuit,
and is typically specified by the manufacturer of the diode.
Importance of Peak Inverse Voltage of a diode in a Rectifier Circuit
The peak inverse voltage of a diode is an important parameter to consider when designing a rectifier circuit.
If the PIV of the diode is not high enough to handle the reverse voltage produced in the circuit, the diode may fail or be damaged.
In addition, if the PIV is too low, the diode may not work effectively in the circuit.
it is important to choose a diode with a PIV that is suitable for the application in which it will be used.
Short Essay on the StIn conclusion, peak inverse voltage is an important factor to consider when designing a rectifier circuit.
It is the highest possible voltage that can be produced when the diode in a rectifier circuit is reverse-biased.
The PIV of a diode is important because if it is not high enough, the diode may fail or be damaged.
To know more about Voltage visit:
https://brainly.com/question/32002804
#SPJ11
A potential difference of 0.800 V is needed to provide a large current for arc welding. The potential difference across the primary of a step-down transformer is 161 V. How many turns must be on the primary for each turn on the secondary?
Each turn on the primary must have 0.005 V.
In order to determine the number of turns required on the primary for each turn on the secondary, we need to compare the potential differences across the primary and the desired potential difference for arc welding.
We are given that a potential difference of 0.800 V is needed for arc welding, and the potential difference across the primary of the step-down transformer is 161 V. To find the ratio of turns, we can divide the potential difference across the primary by the desired potential difference for arc welding:
161 V / 0.800 V = 201.25
This result tells us that for each turn on the secondary, there must be approximately 201.25 turns on the primary. However, the requested answer is the number of turns on the primary for each turn on the secondary. To calculate this, we take the reciprocal of the above result:
1 / 201.25 = 0.0049691
Hence, each turn on the primary must have approximately 0.0049691 V.
Learn more about Turn
brainly.com/question/28340063
#SPJ11
If tripling the voltage across a resistor triples the current through the resistor, then O the resistor value did not changed O the resistor value increased O it is impossible to determine the change in the resistor value O the resistor value decreased
If tripling the voltage across a resistor triples the current through the resistor, then it is impossible to determine the change in the resistor value.
The relationship between voltage, current, and resistance in a circuit is described by Ohm's Law, which states that the current through a resistor is directly proportional to the voltage across it and inversely proportional to its resistance. Mathematically, this can be expressed as I = V/R, where I represents current, V represents voltage, and R represents resistance.
According to the given scenario, if tripling the voltage across a resistor (V) also triples the current through the resistor (I), then the ratio V/I remains constant. This suggests that the resistance (R) of the resistor did not change.
If the resistance value had increased, the current would have decreased, not tripled. Similarly, if the resistance had decreased, the current would have increased more than threefold. However, since the current tripled precisely in response to the voltage tripling, it indicates that the resistance value remained unchanged.
Therefore, based on the given information, it is impossible to determine any change in the resistance value of the resistor.
Learn more about resistor triples here:
https://brainly.com/question/31258648
#SPJ11
In the circuit shown 12 = 2 A and 13= 1.1 A. The value of (in V) is 62 빠 I NII 52, 3 w E2 We R |
The value of (in V) is 50.
In the given circuit, the current passing through resistor 12 is 2 A, and the current passing through resistor 13 is 1.1 A. We are asked to find the value of (in V), which represents the voltage drop across resistor 11.
To determine the voltage drop across resistor 11, we can apply Ohm's Law, which states that the voltage (V) across a resistor is equal to the current (I) passing through it multiplied by the resistance (R). In this case, we know the current passing through resistor 12 (2 A) and resistor 13 (1.1 A), but we don't have the resistance values.
To find the value of (in V), we need to consider the concept of parallel resistors. When resistors are connected in parallel, the voltage across each resistor is the same. Therefore, the voltage drop across resistor 11 would be equal to the voltage drop across either resistor 12 or resistor 13.
Since we are given the current passing through each resistor, we can use Ohm's Law to calculate the voltage drops across resistors 12 and 13. Let's assume the resistance of resistor 12 is R12 and the resistance of resistor 13 is R13.
Using Ohm's Law, the voltage drop across resistor 12 can be calculated as V12 = I12 * R12, and the voltage drop across resistor 13 can be calculated as V13 = I13 * R13. However, we don't have the resistance values to directly calculate the voltage drops.
Therefore, we need more information or additional equations to determine the resistance values and subsequently calculate the voltage drop across resistor 11. Without further details or equations, we cannot find the exact value of (in V).
Learn more about Value
brainly.com/question/30145972
#SPJ11
Q 2. 500 kg/hr of steam drives turbine. The steam enters the turbine at 44 atm and 450°C at a linear velocity of 60 m/s and leaves at a point 5m below the turbine inlet at atmospheric pressure and a velocity of 360 m/s. The turbine delivers shaft work at a rate 30 kw and heat loss from the turbine is estimated to be 104 kcal/h. a. Sketch the process flow diagram (1 mark) b. Calculate the specific enthalpy change of the process (7 marks)
The specific enthalpy change of the process is -3080 kJ/kg.
The specific enthalpy change of the process can be calculated using the formula:
Δh = h2 - h1
Where Δh is the specific enthalpy change, h2 is the specific enthalpy at the turbine outlet, and h1 is the specific enthalpy at the turbine inlet.
To calculate the specific enthalpy change, we need to determine the specific enthalpy values at the turbine inlet and outlet. We can use steam tables or thermodynamic properties of steam to find these values.
Given:
- Steam enters the turbine at 44 atm and 450°C.
- Steam leaves the turbine at atmospheric pressure.
- Turbine delivers shaft work at a rate of 30 kW.
- Heat loss from the turbine is estimated to be 104 kcal/h.
Using the provided information, we can determine the specific enthalpy values at the turbine inlet and outlet. We can then calculate the specific enthalpy change using the formula mentioned earlier.
Learn more about the calculations involved in determining the specific enthalpy change of the process.
A pendulum is pulled to an angle of 16^∘
to the right of the vertical. The mass of the bob is 410 g. (a) Draw a free-body diagram showing all the forces acting on the bob.Scroll down and click add file to insert the pictures of detail calculation. (b) Determine the restoring force of the pendulum.
a) The free-body diagram of the pendulum bob shows the weight of the bob acting downward and the tension force acting upward.
b) The restoring force of the pendulum can be determined using the gravitational force acting on the bob.
a) A free-body diagram is a diagram that shows all the forces acting on an object. In the case of a pendulum bob, the main forces acting on it are the weight of the bob and the tension force. The weight, W, acts downward due to gravity and can be represented by a vector pointing straight down.
The tension force, T, acts along the string of the pendulum and can be represented by a vector pointing upward from the bob. A free-body diagram visually represents these forces and helps in analyzing the motion of the pendulum.
b) The restoring force of a pendulum is the force that acts to bring the pendulum bob back to its equilibrium position. In this case, the restoring force is provided by the gravitational force acting on the bob. The gravitational force, F_g, can be calculated using the equation:
F_g = m × g,
where m is the mass of the bob and g is the acceleration due to gravity. The mass of the bob is given as 410 g (0.41 kg), and the acceleration due to gravity is approximately 9.8 m/s². Substituting these values into the equation, we can calculate the restoring force:
F_g = 0.41 kg × 9.8 m/s²,
F_g ≈ 4.02 N.
Therefore, the restoring force of the pendulum is approximately 4.02 N, which acts to bring the pendulum bob back towards its equilibrium position.
To know more about tension force refer here:
https://brainly.com/question/29900235#
#SPJ11
1. Semi-diurnal tides have ________ high tide(s) and _________ low tide(s) per day.
a. 2. . . 2
b. 1. . . 1
c. 1. . . 2
d. 2. . . 1
2. Constructive wave interference __________.
a. seldom happens
b. is always happening
c. occurs when wave crests coincide making the resulting wave heights greater than the original wave heights
d. occurs when a wave crest and trough coincide making the resulting wave heights less than the original heights
e. Both b and c are correct.
Semi-diurnal tides have _2_ high tide(s) and _2_ low tide(s) per day. (option a). Constructive wave interference occurs when wave crests coincide making the resulting wave heights greater than the original wave heights. (option c).
Semi-diurnal tides are one of the many types of tides. These tides have two high tides and two low tides each day, with a time gap of about 12 hours and 25 minutes between each.
Constructive wave interference _occurs when wave crests coincide making the resulting wave heights greater than the original wave heights_.Wave interference is the phenomenon in which two waves combine to form a resultant wave of greater, lower, or the same amplitude as the original waves. When the waves' crests coincide, they add up, resulting in larger wave heights than either of the original waves, known as constructive wave interference.
Hence option a and c are the correct answers respectively.
Learn more about Semi-diurnal tides at https://brainly.com/question/28098307
#SPJ11
A thin, spherical shell has a radius of 30.0 cm and carries a charge of 150μC. Find the electric field a) 10.0 cm from the shell's center. b) 40.0 cm from the shell's center.
a) The electric field at 10.0 cm from the shell's center is zero.
b) The electric field at 40.0 cm from the shell's center is approximately 3.36 × 10⁵ N/C.
To find the electric field at a distance from a thin, spherical shell, we can make use of Gauss's law. According to Gauss's law, the electric field due to a spherically symmetric charge distribution outside the shell is the same as that of a point charge located at the center of the shell, with the total charge of the shell.
Radius of the spherical shell (r) = 30.0 cm
Charge of the spherical shell (Q) = 150 μC = 150 × 10⁻⁶ C
a) To find the electric field at a distance of 10.0 cm from the shell's center, which is less than the radius of the shell, we can consider a Gaussian surface inside the shell. Since the net charge enclosed by the Gaussian surface is zero, the electric field at this distance will be zero. This is because the electric field due to each infinitesimally small charge element on the shell cancels out exactly.
Therefore, the electric field at 10.0 cm from the shell's center is zero.
b) To find the electric field at a distance of 40.0 cm from the shell's center, which is greater than the radius of the shell, we can use Gauss's law. The electric field due to a point charge at the center of the shell is given by:
E = k * (Q / r²)
where E is the electric field, k is the electrostatic constant (8.99 × 10⁹ N m²/C²), Q is the charge of the shell, and r is the distance from the center of the shell.
Substituting the given values:
E = (8.99 × 10⁹ N m²/C²) * (150 × 10⁻⁶ C) / (0.40 m)²
Calculating the electric field:
E ≈ 3.36 × 10⁵ N/C
Therefore, the electric field at 40.0 cm from the shell's center is approximately 3.36 × 10⁵ N/C.
To know more about Gauss's law, refer to the link below:
https://brainly.com/question/30490908#
#SPJ11
On a ship of 12,000 tonnes displacement with KG 9.0m, 200 tonnes of cargo was shifted from the upper deck Kg 12.0m to the lower hold, Kg 2.0m. Calculate the final KG of the ship.
The final KG of the ship is 9.01639 m.The ship of 12,000 tonnes displacement with KG 9.0m, 200 tonnes of cargo was shifted from the upper deck Kg 12.0m to the lower hold, Kg 2.0m.
We need to calculate the final KG of the ship.
We know that; Moment before = Moment after
Moment before = (total weight on the ship) x (KG of ship)Moment after = (total weight on the ship) x (KG of ship).
The total weight of the ship is 12000 tonnes + 200 tonnes = 12200 tonnes
Moment before = (12000 x 9) + (200 x 12) = 108000 + 2400 = 110400 tonne-meter
Moment after = (12000 x KG) + (200 x 2)12200 KG = 110400 / 12200 KG = 9.01639 m (final KG of ship).
Hence, the final KG of the ship is 9.01639 m.
Learn more about displacement here ;
https://brainly.com/question/29957379
#SPJ11
Two converging lenses with focal lengths of 50 cm and 22 cm are 15 cm apart. A 2.5-cm-tall object is 25 cm in front of the 50-cm-focal-length lens. negative value if the image is on the same side. S = 33 cm Submit Previous Answers Correct Here we learn to determine image distance from the optical system consisting of two lenses. Part B Calculate the image height. Express your answer to two significant figures and include the appropriate units. D μA ? h' = 2.2 cm Submit Previous Answers Request Answer X Incorrect; Try Again; 8 attempts remaining Provide Feedback
According to the question,Two converging lenses with focal lengths of 50 cm and 22 cm are 15 cm apart.A 2.5-cm-tall object is 25 cm in front of the 50-cm-focal-length lens.
The object distance, u = -25 cm, because the object is to the left of the lens. The focal length of the first lens, f1 = 50 cm. The distance between the lenses, d = 15 cm.
The focal length of the second lens, f2 = 22 cm.
And the image distance, v is required.
Calculate the image height.μ = v/u = (d-f1)/f1d = 15 cmf2 = 22 cmv = (f2*d)/(f1+f2-d).
Using the formula to calculate v, we get;v = 66 cm.
Now, using the formula; Magnification, m = -v/u.
So, the magnification is;m = 66/(-25) = -2.64h' = m * h where h is the height of the object.
So;h' = -2.64 * 2.5 = -6.6 cm (rounded off to two significant figures).
As the magnification is negative, the image is inverted.
Therefore, the image height is 6.6 cm and it is inverted.
Learn more about focal length here ;
https://brainly.com/question/2194024
#SPJ
please solve
2 The 500-kg uniform beam is subjected to the three external loads shown. Compute the reactions at the support point O . The x-y plane is vertical.
The reactions at support point O are Rₓ = 10,000 N horizontally and Rᵧ = 15,400 N vertically.
To compute the reactions at the support point O, we need to analyze the forces acting on the beam and apply the principles of static equilibrium. Since you mentioned that the x-y plane is vertical, I assume that the beam is horizontal.
Let's denote the reactions at point O as Rₓ and Rᵧ, where Rₓ is the horizontal reaction and Rᵧ is the vertical reaction.
We have three external loads acting on the beam:
1. A 200-kg load at point A located 2 meters from point O.
2. A 300-kg load at point B located 4 meters from point O.
3. A 500-kg load at point C located 5 meters from point O.
Since the beam is uniform, its weight acts at the center of the beam, which is 2.5 meters from point O.
To determine the reactions at point O, we can start by summing the forces in the horizontal (x) and vertical (y) directions separately.
In the x-direction:
Rₓ - 200 kg × 9.8 m/s² - 300 kg × 9.8 m/s² - 500 kg × 9.8 m/s² = 0
Rₓ = (200 kg + 300 kg + 500 kg) × 9.8 m/s²
Rₓ = 10,000 N
In the y-direction:
Rᵧ - 200 kg × 9.8 m/s² - 300 kg × 9.8 m/s² - 500 kg × 9.8 m/s² - 500 kg × 9.8 m/s² = 0
Rᵧ = (200 kg + 300 kg + 500 kg + 500 kg) × 9.8 m/s²
Rᵧ = 15,400 N
Therefore, the reactions at support point O are Rₓ = 10,000 N horizontally and Rᵧ = 15,400 N vertically.
To know more about static equilibrium click on below link :
https://brainly.com/question/32669461#
#SPJ11
When two waves are out of phase, this means that the waves travel further by one wavelength crest overlaps crest crest overlaps trough trough overlaps trough the waves travel further by quarter of a wavelength Question 8 ( 1 point) As the distance between the slits increases, the distance between the dark fringes decreases. True False
The given statement " As the distance between the slits increases, the distance between the dark fringes decreases. " is False because,
As the distance between the slits increases, the distance between the dark fringes actually increases, rather than decreases. This phenomenon can be understood by considering the principles of interference in waves.
When light passes through multiple slits, such as in a double-slit experiment, it forms an interference pattern on a screen. The interference pattern consists of alternating bright and dark fringes.
The bright fringes occur where the waves from the two slits constructively interfere, resulting in a maximum intensity of light.
The dark fringes, on the other hand, occur where the waves from the two slits destructively interfere, resulting in a minimum intensity or complete darkness.
The distance between adjacent dark fringes, known as the fringe spacing or fringe separation, depends on the wavelength of the light and the distance between the slits. Mathematically, the fringe spacing can be calculated using the formula:
dsin(theta) = mlambda
where d is the distance between the slits, theta is the angle of the fringe from the central maximum, m is the order of the fringe, and lambda is the wavelength of the light.
We can see that as the distance between the slits (d) increases, the fringe spacing also increases, resulting in a greater distance between the dark fringes.
The statement that the distance between the dark fringes decreases as the distance between the slits increases is false.
To know more about dark fringes refer here
https://brainly.com/question/31576174#
#SPJ11
Derive temperature distribution in a tube wall. Outer surface (at r=ra) is thermally insulated, while inner surface (n.) has constant temperature T
The temperature distribution in a tube wall refers to how the temperature varies across the thickness of the wall. in a tube wall, temperature distribution can be given as T(r, t) = R(r) Θ(t).
To derive the temperature distribution in a tube wall, we can use the heat conduction equation in cylindrical coordinates. The equation is:
∂²T/∂r² + (1/r) ∂T/∂r = (1/α) ∂T/∂t,
where T is the temperature, r is the radial coordinate, α is the thermal diffusivity, and t is the time.
Since the outer surface of the tube wall is thermally insulated, there is no heat transfer across that surface. This implies that the heat flux at r = ra is zero:
(-k) (dT/dr) |(at r=ra) = 0,
where k is the thermal conductivity.
Additionally, since the inner surface of the tube wall has a constant temperature T, we can set:
T(r=0) = [tex]T_{inner[/tex].
To solve this differential equation subject to the given boundary conditions, we can assume a separation of variables solution of the form:
T(r, t) = R(r) Θ(t).
Plugging this into the heat conduction equation, we get:
(R''/R) + (1/r)(R'/R) = (1/(αΘ))(Θ'/Θ) = -λ²,
where λ is the separation constant.
Simplifying, we have:
(zR'' + R')/R = λ²,
and
(Θ'/Θ) = -λ²α,
which gives us two separate ordinary differential equations (ODEs):
rR'' + R' - λ²R = 0, (1)
Θ'/Θ = -λ²α. (2)
Solving equation (2), we have:
Θ(t) = C exp(-λ²αt),
where C is a constant determined by the initial conditions.
Next, let's solve equation (1). This is a second-order linear ODE, and its solution depends on the specific boundary conditions and geometry of the tube wall. Different boundary conditions would result in different solutions.
Once we solve equation (1) and obtain the solution R(r), we can express the general solution for the temperature distribution as:
T(r, t) = R(r) Θ(t).
In the equation T(r, t) = R(r) Θ(t):
T(r, t) represents the temperature at a specific radial position (r) and time (t) within the tube wall.
R(r) represents the radial part of the temperature distribution. It describes how the temperature varies in the radial direction of the tube wall.
Θ(t) represents the time-dependent part of the temperature distribution. It describes how the temperature changes over time.
Learn more about temperature distribution here:
https://brainly.com/question/33346371
#SPJ11
A car is moving at 24 m/s when the driver applies the brakes. The car slows to 18 m/s in 8.6 seconds. What is the car's acceleration? Answer:
The car's acceleration is -0.69 m/s² according to the values of variables.
Based on the stated entities, we will be using the equation of motion to solve the question. The formula to be used is -
v = u + at, where v and u are final and initial velocity respectively, a is acceleration and t refers to time. Keep the values in formula -
18 = 24 + a×8.6
Rearranging the equation
a×8.6 = 18 - 24
Perform subtraction
8.6a = -6
a = -6/8.6
Divide the values to know the acceleration
a = -0.69 m/s²
Hence, the acceleration of car is -0.69 m/s².
Learn more about acceleration -
https://brainly.com/question/460763
#SPJ4